journal article·2024-07-01Open access

Investigation on mechanical properties of aluminum hybrid matrix composites reinforced with fly ash and titanium diboride using stir casting technique

Sathish S, Solomon Raj S, Anish Nair, Sundaraselvan S

Materials Research Express· Volume 11· Issue 7

Abstract

Abstract Aluminium hybrid matrix composites (AHMCs) is employed in the automotive and aerospace industries because to their high strength-to-weight ratio, corrosion resistance, and tribological properties. The objective of this research is to examine the metallurgical, mechanical, and corrosion characteristics of Aluminum hybrid matrix composites (AHMCs) produced by reinforcing LM25 alloy with 5% fly ash and varying percentages (4%, 8%, 12%) of TiB2 using the stir casting technique. The uniform distribution of reinforcing particles was verified by capturing images via SEM and EDAX. Density, Tensile strength, microhardness was conducted for the prepared AHMCs. The outcome reported there was an enhancement by adding reinforcement particles of fly ash and TiB2 comparing to the pure LM25 alloy. This improvement was attributed to the presence of fly ash and TiB2 particles, resulting in a higher dislocation density, with increasing TiB2 content demonstrating improved strength and ductility compared to conventional LM25 alloy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Recent progress in production of metal matrix composites by stir casting process: an overview10.1016/j.matpr.2019.10.079 ↗
2. A review on development of hybrid composites for aerospace applications10.1016/j.matpr.2022.04.511 ↗
3. A study of advancement in application opportunities of aluminum metal matrix composites10.1016/j.matpr.2020.02.516 ↗
4. Recent progress in aluminum metal matrix composites: a review on processing, mechanical and wear properties10.1016/j.jmapro.2020.09.010 ↗
5. Mechanical characterization of LM25 alloy matrix composite reinforced with boron carbide10.1177/00219983211005513 ↗
6. Enhanced mechanical behaviour and grain characteristics of aluminium matrix composites by cold rolling and reinforcement addition (rice husk ash and coal fly ash)10.1177/09544089221124462 ↗
7. In situ synthesis of Al–TiC in aluminum melt10.1016/j.matlet.2005.03.043 ↗
8. Experimental investigation of aluminium hybrid metal matrix composites processed through squeeze casting process10.1016/j.matpr.2020.03.786 ↗
9. Mechanical and physical characterization of powder metallurgy based aluminium metal matrix hybrid composite10.1016/j.matpr.2020.03.134 ↗
10. Synthesis of B4C and BN reinforced Al7075 hybrid composites using stir casting method10.1016/j.jmrt.2020.03.043 ↗
11. Studies on mechanical and microstructural properties of aluminium hybrid composites: influence of SiC/Gr particles by double stir-casting approach10.1007/s12633-022-02106-7 ↗
12. A comparative study of waste eggshells, CaCO3, and SiC-reinforced AA2014 green metal matrix composites10.1177/0021998316672295 ↗
13. A study on mechanical properties of fly ash and alumina reinforced aluminium alloy (LM25) composites
14. Study of mechanical properties of aluminium Lm25 using stir casting method
15. Microstructure characterization and evaluation of mechanical properties of stir rheocast AA2024/TiB2 composite10.1177/0021998319871693 ↗
16. Sliding wear of LM25 aluminium alloy with 7.5% SiC+ 2.5% TiO2 and 2.5% SiC+ 7.5% TiO2 hybrid composites10.1177/0021998313496592 ↗
17. Abrasive wear behavior of monolithic alloy, homogeneous and functionally graded aluminum (LM25/AlN and LM25/SiO2) composites10.1080/02726351.2016.1199074 ↗
18. Experimental analysis of Al composites toughened by aluminium oxide and graphite using stir casting progression10.1016/j.matpr.2023.05.221 ↗
19. Wear analysis on aluminium-boron carbide and fly ash hybrid composites
20. Mechanical properties and metallurgical characterization of LM25/ZrO2 composites fabricated by stir casting method10.1590/S1517-707620190003.0753 ↗
21. Fabrication, microstructure, and mechanical properties of Al-based metal matrix-TiB2-HEA hybrid composite10.1016/j.jallcom.2023.169700 ↗
22. Process development in stir casting and investigation on microstructures and wear behavior of TiB2 on Al6061 MMC10.1016/j.proeng.2013.09.197 ↗
23. Microstructure and mechanical behavior of A356/SiC/Fly-ash hybrid composites produced by electromagnetic stir casting10.1007/s40430-014-0138-y ↗
24. Multi-response ANN modelling and analysis on sliding wear behavior of Al7075/B4C/fly ash hybrid nanocomposites10.1088/2053-1591/ab28d8 ↗
25. Effect of fly ash content in Aluminum matrix composite through stir casting method on mechanical and physical properties
26. Identifying stir casting process parameters to maximize strength of LM13 with TiB2 and ZrC hybrid metal matrix composite10.1515/mt-2023-0193 ↗
27. Microstructural characterization and mechanical properties of TiB2 reinforced Al6061 matrix composites produced using stir casting process10.1016/j.msea.2017.10.087 ↗
28. Investigation of mechanical properties and optimization of forming parameters of Al7075-B4C-fly ash hybrid aluminium matrix composite10.1007/s13369-021-06117-1 ↗
29. Synthesis, microstructure and hardness of Al 7075/B4C/Fly-ash composite using stir casting method10.1016/j.matpr.2019.09.150 ↗
30. Aluminum based hybrid metal matrix composites: a review of selection philosophy and mechanical properties for advanced applications
31. Optimization of stirring parameters using CFD simulations for HAMCs synthesis by stir casting process10.1007/s12666-017-1119-5 ↗
32. Experimental investigation, modeling, and optimization of wear parameters of B4C and fly-ash reinforced aluminum hybrid composite10.3389/fphy.2020.00219 ↗
33. Multi-objective optimization of upsetting parameters of Al–TiC metal matrix composites: a grey Taguchi approach10.1177/0954405413519434 ↗
34. Mechanical properties of ramie polymer composites: review