journal article·2018-03-16

Effect of milling time on powder’s structure evolution of Ti(C,N)-304 stainless steel cermet

Lin He, Yimin Gao, Yefei Li, Zhiwei Liu, Xuxu Huo, Wenyan Zhai

Materials Research Express· Volume 5· Issue 3
Publisher page

Abstract

In this paper, Fe, Ni, Cr, Mn, Si, C element powders and Ti(C,N) ceramic powder were used as starting materials to fabricate Ti(C,N)-304 stainless steel cermet via high-energy ball milling in argon atmosphere. Effect of milling time on powders’ structure, including morphology of powder, average grain size, dislocation density and the solid solubility of Cr in Fe, were studied by x-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). XRD pattern shows that mechanical alloying was occurred during high energy ball milling. Nickel and chromium were gradually solid dissolved into iron and formed 304 stainless steel (304 s), the maximum solid solubility of Cr in Fe is 16.8 at.% obtained at 18 h. The mean grain size of Ti(C,N) particles and 304 s grains declined before 14 h and the minimum grain size of them were about 20 nm and 250 nm respectively, which is consistent with the results revealed by TEM images. The dislocation density in stainless steel powder increased with increasing milling time. After the powders were milled for 18 h, the cermet sintered at 1450 °C for 1 h has the maximum hardness (83.7 HRA) and relative density (93.3%).
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. 10.2320/materia1962.22.31210.2320/materia1962.22.312 ↗
2. 10.1016/j.ijrmhm.2007.01.00310.1016/j.ijrmhm.2007.01.003 ↗
3. 10.1080/1042691950893506410.1080/10426919508935064 ↗
4. 10.1179/026708309X1250693387282910.1179/026708309X12506933872829 ↗
5. 10.1016/j.jallcom.2014.05.15010.1016/j.jallcom.2014.05.150 ↗
6. 10.1016/j.ijrmhm.2014.05.00310.1016/j.ijrmhm.2014.05.003 ↗
7. 10.1016/j.ijrmhm.2014.02.00110.1016/j.ijrmhm.2014.02.001 ↗
8. 10.1179/02670830422502204310.1179/026708304225022043 ↗
9. 10.1016/j.ceramint.2015.10.16810.1016/j.ceramint.2015.10.168 ↗
10. 10.1016/j.ijrmhm.2012.01.00510.1016/j.ijrmhm.2012.01.005 ↗
11. 10.1016/j.ijrmhm.2009.01.00310.1016/j.ijrmhm.2009.01.003 ↗
12. 10.1179/pom.1997.40.2.13910.1179/pom.1997.40.2.139 ↗
13. 10.1016/j.ijrmhm.2016.03.01210.1016/j.ijrmhm.2016.03.012 ↗
14. 10.1016/j.matchar.2006.10.02110.1016/j.matchar.2006.10.021 ↗
15. 10.1016/j.msea.2011.03.07210.1016/j.msea.2011.03.072 ↗
16. 10.1016/j.wear.2016.01.00810.1016/j.wear.2016.01.008 ↗
17. 10.1179/174328405X5174910.1179/174328405X51749 ↗
18. 10.1007/s11085-015-9603-y10.1007/s11085-015-9603-y ↗
19. 10.1016/j.matdes.2006.08.00910.1016/j.matdes.2006.08.009 ↗
20. 10.1007/s11663-016-0658-110.1007/s11663-016-0658-1 ↗
21. 10.1016/j.pmatsci.2005.04.00410.1016/j.pmatsci.2005.04.004 ↗
22. 10.1080/02670836.2015.111469610.1080/02670836.2015.1114696 ↗
23. 10.1179/02670830222500374910.1179/026708302225003749 ↗
24. 10.1016/j.matdes.2004.12.01110.1016/j.matdes.2004.12.011 ↗
25. 10.1016/j.matdes.2013.01.01910.1016/j.matdes.2013.01.019 ↗
26. 10.1016/j.matdes.2014.08.03010.1016/j.matdes.2014.08.030 ↗
27. 10.1016/j.matdes.2016.02.01610.1016/j.matdes.2016.02.016 ↗
28. 10.1016/j.actamat.2008.08.01310.1016/j.actamat.2008.08.013 ↗
29. 10.2355/isijinternational.50.87510.2355/isijinternational.50.875 ↗
30. 10.1063/1.11795110.1063/1.117951 ↗
31. 10.1016/j.actamat.2011.03.05510.1016/j.actamat.2011.03.055 ↗
32. 10.1016/j.jallcom.2015.11.18610.1016/j.jallcom.2015.11.186 ↗
33. 10.1016/j.powtec.2013.07.00610.1016/j.powtec.2013.07.006 ↗
34. 10.1016/S0079-6425(03)00034-310.1016/S0079-6425(03)00034-3 ↗
35. 10.1016/0965-9773(95)00027-510.1016/0965-9773(95)00027-5 ↗
36. 10.1007/s11661-004-0368-110.1007/s11661-004-0368-1 ↗
37. Hume-Rothery W · The Structure of Metals and Alloys · 1988
38. 10.1016/S0921-5093(00)01685-310.1016/S0921-5093(00)01685-3 ↗
39. 10.1016/j.msea.2010.08.05910.1016/j.msea.2010.08.059 ↗
40. 10.1016/j.msea.2014.01.04310.1016/j.msea.2014.01.043 ↗
41. 10.1016/j.msea.2011.11.05110.1016/j.msea.2011.11.051 ↗
42. 10.2355/isijinternational.45.190910.2355/isijinternational.45.1909 ↗
43. He Lin · Mater. Res. Express · 2018 · 5