article·2021-03-01Open access

Improving the corrosion resistance of LY12 aluminum alloy via a novel Mo–Zr–Ti composite conversion coating

Xuzheng Qian, Wen Zhan, Jingjing Pan, Yiting Liu, Feng Huang, Beiji Wang

Abstract

Abstract To improve the corrosion resistance of LY12 aluminum alloy, a novel Mo–Zr–Ti composite conversion coating on its surface was prepared. The surface morphology, elements distribution, phase compositions and the corrosion resistance were systematically determined, and the relation between them were established. The results indicate that the optimal conversion temperature and conversion time are 40 °C and 15 min, respectively. The surface morphology of the composite coating under the best conversion condition is continuous and dense. The major elements are Mo, Zr, Ti, Al, O and F, and their distribution between the inner and outer coating are distinction. The phase compositions mainly consist of MoO 3 , Mo 2 O 5 , TiO 2 , ZrO 2 , Al 2 O 3 , AlF 3 ∙3H 2 O, Na 3 AlF 6 and ZrF 4 , and the nucleation and growth mechanisms are proposed. Additionally, the composite coating can significantly reduce the I corr and increase the film resistance R f in the temperature range from 0 to 60 °C through electrochemical test, and its activation energy E a increases from 25.7 to 34.5 kJ ∙ mol −1 . Compared with Al matrix, the average corrosion rate of the composite coating is reduced by 65% to 85% in the full immersion test. Therefore, the composite conversion coating greatly improves the corrosion resistance of Al matrix.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Aluminum Alloy Microstructure Properties · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.