Alloying effect of Mg on microstructure and mechanical properties at 300 °C of Al–5Cu–1Mn–0.5Ni heat-resistant alloy
Source abstract
Abstract
Abstract The effect of Mg alloying on microstructure and mechanical properties at 300 °C of Al–5Cu–1Mn–0.5Ni heat-resistant aluminum alloy was investigated by microstructure observation and tensile test. Alloying with 0.5 wt%Mg addition considerably increases the yield strength at 300 °C of samples at as-cast, as-solutionized and as-aged states. It also greatly enhances the strengthening effects from solution and ageing treatments, however, simultaneously, decreases the elongation greatly. During the solidification process of the alloy with Mg addition, a great amount of whisker-like Al–Cu–Mg compound phase is formed at the eutectic boundary zones in the form of ridge configuration, which is determined as AlCuMg intermetallic compound by TEM. During the solution treatment, this whisker-like AlCuMg phase is completely dissolved into Al matrix that leads to a remarkable rise in the increment of yield strength at 300 °C by solution strengthening. The alloying of Mg has a significant influence on the precipitation behavior during the ageing treatment, for examples, promoting the formation of finer θ′′ particles and a great number of Cu–Mg atomic clusters. During high temperature tensile test, theses clusters evolve into fine cube-like Al5Cu2Mg particles with orthorhombic structure. It is the significant microstructure evolution induced by alloying of Mg that leads to the great rise in yield strength at 300 °C. Addition of Mg in Al–Cu–Mn–Ni alloy dose not lead to the formation of meta-stable or stable S phase, but whisker-like AlCuMg and cube-like Al5Cu2Mg compounds are determined by TEM.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Nanostructure of aluminum alloy 2024: segregation, clustering and precipitation processed10.1016/j.actamat.2010.11.033 ↗
2. Microstructure, tensile properties and fracture behavior of high temperature Al–Si–Mg–Cu cast alloys10.1016/j.msea.2013.03.084 ↗
3. Effects of Cu content and presaging on precipitation characteristics in aluminium alloy 602210.1007/s11661-000-0272-2 ↗
4. High-temperature properties and microstructural evolution of Al–Cu–Mn–RE(La/Ce) alloy designed through thermodynamic calculation10.1016/j.msea.2019.04.105 ↗
5. Effects of Yb addition on microstructures and mechanical properties of 2519A aluminum alloy plate10.1016/S1003-6326(09)60205-3 ↗
6. Influences of Ce addition on the microstructures and mechanical properties of 2519A aluminum alloy plate10.1016/j.jallcom.2009.10.185 ↗
7. Developing high performance mechanical properties at elevated temperature in squeeze cast Al–Cu–Mn–Fe–Ni alloys10.1016/j.matchar.2019.01.022 ↗
8. Contributions to high temperature strengthening from three types of heat-resistant phases formed during solidification, solution treatment and aging treatment of Al–Cu–Mn–Ni alloys respectively10.1016/j.msea.2019.138819 ↗
9. Ternary restricted-equilibrium phase diagrams: II. Practical application: aluminum-rich corner of the Al–Cu–Mg system10.1016/0956-7151(90)90312-5 ↗
10. Progress in structural materials for aerospace systems10.1016/j.actamat.2003.08.023 ↗
11. A model for precipitation kinetics and strengthening in Al–Cu–Mg alloys10.1016/j.msea.2007.03.033 ↗
12. Precipitation hardening in Al–Cu–Mg alloys revisited10.1016/j.scriptamat.2005.09.010 ↗
13. Hardening of an Al–Cu–Mg alloy containing Types I and II S phase precipitates10.1016/j.matdes.2009.12.048 ↗
14. The structural ageing characteristics of Al–Cu–Mg alloys with copper-magnesium weight ratios of 7-1 and 2.2-1
15. Report on precipitation10.1016/0502-8205(54)90006-4 ↗
16. Cluster hardening in an aged Al–Cu–Mg alloy10.1016/S1359-6462(96)00415-0 ↗
17. Origins of hardening in aged Al–Cu–Mg–(Ag) alloys10.1016/S1359-6454(97)00039-6 ↗
18. Solute clustering in Al–Cu–Mg alloys during the early stages of elevated temperature ageing10.1016/j.actamat.2010.05.020 ↗
19. In situ evaluation of the microstructure evolution during rapid hardening of an Al–2.5Cu–1.5Mg (wt%) alloy10.1016/j.actamat.2011.01.027 ↗
20. Analysis of modulus hardening in an artificial aged Al–Cu–Mg alloy by atom probe tomography10.1016/j.msea.2015.01.079 ↗
21. Effects of pre-strain on Cu-Mg co-clustering and mechanical behavior in a naturally aged Al–Cu–Mg alloy10.1016/j.msea.2017.06.097 ↗
22. Influence of deformation ageing treatment on microstructure and properties of aluminum alloy 261810.1016/j.matchar.2007.08.007 ↗
23. Effect of Trace Sc and Zr on the mechanical properties and microstructure of Al alloy 2618
24. Effect of Mg addition on the creep and yield behavior of an Al–Sc alloy10.1016/S1359-6454(03)00288-X ↗
25. Effect of pre-deformation on microstructures and mechanical properties of high purity Al–Cu–Mg alloy10.1016/S1003-6326(16)64253-X ↗
26. Effects and behavior of magnesium in Al–Cu–Mn high -strength foundry alloy
27. Effects of Ag on microstructure and mechanical properties of 2519 aluminum alloy10.1007/s11771-006-0143-0 ↗
28. Effect of Mg addition on microstructure and mechanical properties of Al–Cu–Mn–Ag alloy10.14158 /j. cnki. 1001-3814.2007.18.004 ↗
29. Coexistence of clusters, GPB zones, S′′-, S′- and S-phases in an Al–0.9% Cu–1.4% Mg alloy10.1016/S1359-6454(99)00422-X ↗
30. GPB zones and composite GPB/GPBII zones in Al–Cu–Mg alloys10.1016/j.actamat.2008.05.042 ↗
31. Effects of trace Mn addition on the elevated temperature tensile strength and microstructure of a low-iron Al–Si piston alloy10.1016/j.matlet.2007.11.035 ↗
32. Nucleation of precipitates in aged Al–Cu–Mg–(Ag) alloys with high Cu:Mg ratios10.1016/1359-6454(95)00314-2 ↗
33. Geuser, Clustering kinetics during natural ageing of Al–Cu based alloys with (Mg, Li) additions10.1016/j.actamat.2018.07.035 ↗