journal article·2023-04-01Open access

Experimental investigation of additive free-low-cost vinyl triarylamines based hole transport material for FAPbI3-based perovskite solar cells to enhance efficiency and stability

Anjan Kumar, Sangeeta Singh, Mustafa K A Mohammed, Duha S Ahmed

Materials Research Express· Volume 10· Issue 4

Abstract

Abstract Perovskite-based solar cells have drawn a lot of attention recently because they possess many desirable qualities, including strong photon absorption, large carrier lifetime, ambipolar transmission, and low exciton binding energy. With continual optimization of each functional layer, particularly the active layer and hole transporting layer, the power conversion efficiency (PCE) of perovskite materials has reached over 25%. Spiro-OMeTAD is a widely utilized hole transport material (HTM) for efficient solar cell operation. To improve conductivity, this material is often doped with additives such as 4-tert-butylpyridine (TBP) or bis(trifluoromethane)sulfonimide lithium salt (Li-TFSI). Unfortunately, these additives can weaken the perovskite layer and reduce device stability. In this work, we enhanced the efficiency as well as stability of formamidinium-based perovskite using additive-free, cost-effective HTM based on vinyl triarylamines developed by the Tokyo chemical industry. We have deposited vinyl triarylamines-based HTM on both FAPbI3 and MAPbI3 perovskite. To compare the results, we have deposited traditional additive-based as well as additive free Spiro-OMeTAD on FAPbI3 perovskite. Results are encouraging as the FAPbI3-based device showed a decent power conversion efficiency of 16.86%, which is higher than when the same HTM is deposited on the MAPbI3-based device and comparable with doped Spiro-OMeTAD and much higher than undoped Spiro-OMeTAD based HTM deposited on FAPbI3 perovskite. Enhancement in device performance is attributed to better hole mobility and favourable energy band positioning of vinyl triarylamines based hole transport layer w.r.t FAPbI3 perovskite. The PCE of a FAPbI3-based device using the suggested HTM (SHTM) suffers only a 12% decrease while following the maximum power point for 1800 h in ambient air.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Long-term stable and hysteresis-free planar perovskite solar cells using green antisolvent strategy10.1007/s10853-021-06200-w ↗
2. Ionic liquid passivator for mesoporous titanium dioxide electron transport layer to enhance the efficiency and stability of hole conductor-free perovskite solar cells10.1021/acs.energyfuels.2c01980 ↗
3. Polyaniline polymer-modified ZnO electron transport material for high-performance planar perovskite solar cells10.1016/j.ceramint.2021.08.244 ↗
4. Advances to high-performance black-phase FAPbI3 perovskite for efficient and stable photovoltaics10.1002/sstr.202000130 ↗
5. Stability of solution-processed MAPbI 3 and FAPbI 3 layers10.1039/C6CP00721J ↗
6. Stabilized tilted-octahedra halide perovskites inhibit local formation of performance-limiting phases10.1126/science.abl4890 ↗
7. Improved mixed-dimensional 3D/2D perovskite layer with formamidinium bromide salt for highly efficient and stable perovskite solar cells10.1016/j.cej.2021.131185 ↗
8. Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide10.1126/science.aay7044 ↗
9. Formamidinium-containing metal-halide: an alternative material for near-IR absorption perovskite solar cells, The10.1021/jp411112k ↗
10. Vapor-assisted deposition of highly efficient, stable black-phase FAPbI3 perovskite solar cells10.1126/science.abb8985 ↗
11. Unraveling the varied nature and roles of defects in hybrid halide perovskites with time-resolved photoemission electron microscopy10.1039/D1EE02055B ↗
12. Grain boundary defect passivation in quadruple cation wide-bandgap perovskite solar cells10.1002/solr.202000740 ↗
13. Introduction of cadmium chloride additive to improve the performance and stability of perovskite solar cells, RSC advances
14. Anti-solvent engineering via potassium bromide additive for highly efficient and stable perovskite solar cells10.1016/j.orgel.2021.106310 ↗
15. A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells10.1038/s41560-018-0200-6 ↗
16. Novel p-dopant toward highly efficient and stable perovskite solar cells10.1039/C8EE01500G ↗
17. Advancement in inorganic hole transport materials for inverted perovskite solar cells10.1007/s11664-020-08264-x ↗
18. Accelerated degradation due to weakened adhesion from Li-TFSI additives in perovskite solar cells10.1021/acsami.6b14089 ↗
19. Extrinsic ion migration in perovskite solar cells10.1039/C7EE00358G ↗
20. Efficient and stable pure α-phase FAPbI3 perovskite solar cells with a dual engineering strategy: additive and dimensional engineering approaches10.1016/j.cej.2022.136469 ↗
21. Adaption of MAPbI3 perovskite with copper phthalocyanine inorganic hole transport layer via nitrosonium tetrafluoroborate additive to enhance performance and stability of perovskite solar cells10.1016/j.optmat.2022.112901 ↗
22. Ionic liquid passivator for mesoporous titanium dioxide electron transport layer to enhance the efficiency and stability of hole conductor-free perovskite solar cells10.1021/acs.energyfuels.2c01980 ↗
23. Suppressing defects through the synergistic effect of a Lewis base and a Lewis acid for highly efficient and stable perovskite solar cells10.1039/C8EE02252F ↗
24. New-generation integrated devices based on dye-sensitized and perovskite solar cells10.1039/C7EE03165C ↗
25. Detrimental effect of silver doping in spiro-MeOTAD on the device performance of perovskite solar cells10.1016/j.orgel.2019.03.036 ↗
26. Effect of CsCl additive on the morphological and optoelectronic properties of formamidinium lead iodide perovskite10.1002/solr.201900294 ↗
27. Additive-free, cost-effective hole-transporting materials for perovskite solar cells based on vinyl triarylamines10.1021/acsami.0c06055 ↗
28. FAPbI3-based perovskite solar cells employing hexyl-based ionic liquid with an efficiency over 20% and excellent long-term stability10.1002/adfm.202002964 ↗
29. Benzylammonium-mediated formamidinium lead iodide perovskite phase stabilization for photovoltaics10.1002/adfm.202101163 ↗
30. Efficient and stable low-bandgap perovskite solar cells enabled by a CsPbBr3-cluster assisted bottom-up crystallization approach10.1021/jacs.9b11546 ↗
31. Molecular engineering of organic spacer cations for efficient and stable formamidinium perovskite solar cell, Advanced Energy
32. Elimination of yellow phase: an effective method to achieve high quality HC (NH2) 2PbI3-based perovskite films10.1002/cssc.201903216 ↗
33. Chemi-structural stabilization of formamidinium lead iodide perovskite by using embedded quantum dots10.1021/acsenergylett.9b02450 ↗
34. Guanine-stabilized formamidinium lead iodide perovskites10.1002/anie.201912051 ↗
35. Enhancement in power conversion efficiency and stability of perovskite solar cell by reducing trap states using trichloroacetic acid additive in anti-solvent10.1016/j.surfin.2022.102341 ↗
36. Studying the bactericidal ability and biocompatibility of gold and gold oxide nanoparticles decorating on multi-wall carbon nanotubes10.1007/s11696-020-01223-0 ↗
37. Influence of heat treatment on H2S gas sensing features of NiO thin films deposited via thermal evaporation technique10.1016/j.mssp.2022.107232 ↗
38. Facile synthesis of a dopant-free hole transporting material with a phenothiazine core for planar perovskite solar cells10.1039/C7RA10677G ↗
39. Band-gap tuning of lead halide perovskites using a sequential deposition process10.1039/C4TA00435C ↗
40. Single-crystal MAPbI3 perovskite solar cells exceeding 21% power conversion efficiency10.1021/acsenergylett.9b00847 ↗
41. Efficient and stable perovskite solar cells by interface engineering at the interface of electron transport layer/perovskite10.1016/j.optmat.2022.112846 ↗
42. Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells10.1038/s41586-021-03406-5 ↗