journal article·2020-01-01Open access

A dynamic study of effect of multiple parameters on interface characteristic in double-vertical explosive welding

Zerui Sun, Changgen Shi, Zhonghang Fang, Hang Shi

Materials Research Express· Volume 7· Issue 1

Abstract

Abstract Previous studies focused on the research of single parameters on the bonding quality of explosive welded composite plates. To explore the dynamic influence of multiple parameters on the interface, a VST (velocity, stand-off gap and charge thickness) function was proposed. The three-dimensional diagram clearly and intuitively showed that the collision velocity was comprehensively affected by the explosive thickness and stand-off gap. Four different sets of parameters were chosen and the composite plates were successfully manufactured in the experiment of double vertical explosive welding (DVEW). The interface morphology, element distribution and the mechanical property were discussed respectively. The optical microscope showed that all the samples were wavy interface but the dimensions of the ripples was different. The defects, such as melting layer and island region, appeared less frequently at bonding interface when the collision velocity was lower. The grain refinement, adiabatic shear bands were found at the crest and side of wave respectively. The width of elements diffusion layer of joint increased in line with higher collision velocity. It was indicated the maximum microhardness reached 293HV at the bonding interface due to work hardening. Shear and tensile tests suggested the the mechanical property of large wave was better than that of small wavy interface. The fracture morphology showed obvious stratification and the dimple at the bonding interface was smaller in diameter and less plastic.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Recent developments in explosive welding10.1016/j.matdes.2010.10.017 ↗
2. Structural properties of Ti/Al clads manufactured by explosive welding and annealing10.1016/j.matdes.2015.11.087 ↗
3. Structural and mechanical properties of metallic-intermetallic laminate composites produced by explosive welding and annealing10.1016/j.matdes.2011.09.030 ↗
4. Study on self-restrained explosive welding with high energy efficiency10.1007/s00170-018-2600-y ↗
5. Detonation mechanism in double vertical explosive welding of stainless steel/steel10.1016/S1006-706X(15)30095-9 ↗
6. Influence of explosive ratio on morphological and structural properties of Ti/Al clads10.3390/met9020119 ↗
7. Numerical simulation of explosive welding using the material point method10.1016/j.ijimpeng.2010.08.003 ↗
8. Experimental investigation of explosive welding of cp-titanium/AISI 304 stainless steel10.1016/j.matdes.2008.06.016 ↗
9. Joining of titanium/stainless steel by explosive welding and effect on interface10.1016/j.jmatprotec.2005.06.045 ↗
10. Analysis of the explosive cladding of cu-low carbon steel plates10.1016/S0924-0136(03)00539-9 ↗
11. Examination of copper/stainless steel joints formed by explosive welding10.1016/j.matdes.2004.07.021 ↗
12. Microstructural and mechanical properties of Cu-Ti plates bonded through explosive welding process10.1016/j.jmatprotec.2005.02.264 ↗
13. An investigation of mechanical and metallurgical properties of explosive welded aluminum-dual phase steel10.1016/j.matlet.2008.05.060 ↗
14. Investigation of explosive welding parameters and their effects on microhardness and shear strength10.1016/S0261-3069(03)00066-9 ↗
15. Explosive welding of stainless steel-carbon steel coaxial pipes10.1007/s10853-011-5841-9 ↗
16. Investigation of effect of the stand-off distance on interface characteristics of explosively welded copper and stainless steel10.1016/j.matdes.2007.07.012 ↗
17. Fabrication of bimetallic rods by explosive cladding and warm extrusion10.1016/S0924-0136(98)00042-9 ↗
18. Mechanism of bond zone wave formation in explosion-clad metals10.1007/BF02814967 ↗
19. Lower limit law of welding windows for explosive welding of dissimilar metals10.1016/S1006-706X(17)30126-7 ↗
20. Control of energetic conditions by employing interlayer of different thickness for explosive welding of titanium/304 stainless steel10.1016/j.jmatprotec.2007.05.002 ↗
21. Weldability window and the effect of interface morphology on the properties of Al/Cu/Al laminated composites fabricated by explosive welding10.1016/j.matdes.2015.07.114 ↗
22. Stivers · 1975 · 4 · 2
23. Design for quality explosive welding10.1016/0924-0136(92)90200-C ↗
24. Bernard · 1982
25. Binding criterion for metals with explosive welding10.1007/BF00785371 ↗
26. Abrahamson · Permanent periodic surface deformations due to a traveling jet journal of applied mechanics · 1961 · 28 · 51910.1115/1.3641777 ↗
27. The initial velocities of fragments from bombs, shell and grenades
28. Kennedy · 1972
29. The strength effect correction of Gueney’s formula
30. Use of explosive energy in manufacturing metallic materials of new properties
31. Simulation of the process of wave formation in explosive welding10.1007/BF00843076 ↗
32. The mechanics of wave formation in explosive welding10.2307/2415515 ↗
33. High-velocity impact welding process: a review10.3390/met9020144 ↗
34. New explosive welding technique to weld aluminum-alloy and stainless-steel plates using a stainless-steel intermediate plate10.1007/BF02648602 ↗
35. Effects of intermetallic compound on the electrical and mechanical properties of friction welded Cu/Al bimetallic joints during annealing10.1016/j.jallcom.2004.07.057 ↗
36. Towards better understanding of explosive welding by combination of numerical simulation and experimental study10.1016/j.matdes.2019.107649 ↗
37. Atomic diffusion behavior in Cu-Al explosive welding process10.1063/1.4775788 ↗
38. Microstructure and mechanical properties of Ti/Al explosive cladding10.1016/j.matdes.2013.12.012 ↗
39. Liu · Explosive Welding of Copper to High Nitrogen Austenitic Stainless Steel Metals · 2019 · 9 · 33910.3390/met9030339 ↗
40. Microstructure characterisation of magnetic pulse welded AA6061-T6 by electron backscattered diffraction10.1179/174329308X341915 ↗
41. Experimental and numerical investigations of interface characteristics of copper/steel composite prepared by explosive welding10.1016/j.matdes.2018.05.027 ↗