journal article·2021-04-01Open access

Research on the dynamic mechanical properties and constitutive model of metal rubber under impact loading

Youchun Zou, Chao Xiong, Junhui Yin, Kaibo Cui, Xiujie Zhu, Huiyong Deng, Shijun Song

Materials Research Express· Volume 8· Issue 4

Abstract

Abstract The development of lightweight, impact-resistant and high energy dissipation materials is of great significance to reduce the hazards of explosions and impacts. Metal rubber (MR) has the characteristics of low density, high damping performance and high elasticity, which shows great potential in the field of protection. However, there are few studies on the dynamic mechanical response of MR under high-speed impact. A series of experiments were carried out to study the mechanical properties of MR. It is found that the deformation mechanism of the metal wire inside the MR determines the mechanical properties. Under quasi-static conditions, the stress-strain of MR includes an elastic stage, a softening stage and a hardening stage, and the stress-strain under high-speed impact includes an elastic stage, a softening stage and a failure stage. In addition, the smaller the wire diameter, the higher the load-bearing capacity of the MR. The damage characteristics of MR under high-speed impact are divided into expansion failure and compaction failure, which will affect mechanical performance in the failure stage. The calculated energy absorption and ideal energy absorption efficiency show that MR is a material with excellent energy absorption properties. The dynamic elastic modulus and dynamic peak stress of MR have strain rate effect and density effect. A constitutive model based on Sherwood-frost equation was established, which can precisely forecast the dynamic mechanical properties.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Cellular and Composite Structures · Elasticity and Material Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. A review of impact resistant biological and bioinspired materials and structures10.1016/j.jmrt.2020.10.062 ↗
2. Tailoring an impact resistant engineered cementitious composite (ECC) by incorporation of crumb rubber10.1016/j.conbuildmat.2020.120116 ↗
3. Polyurea coating for foamed concrete panel: an efficient way to resist explosion10.1016/j.dt.2019.06.010 ↗
4. Failure analyses of flexible Ultra-High Molecular Weight Polyethylene (UHMWPE) fiber reinforced anti-blast wall under explosion10.1016/j.compstruct.2017.10.037 ↗
5. Experimental and numerical investigation of high velocity soft impact loading on aircraft materials10.1016/j.ast.2019.04.015 ↗
6. French · 2010 · 244
7. Structural and mechanical properties of fish scales for the bio-inspired design of flexible body armors: a review10.1016/j.actbio.2020.12.003 ↗
8. Enhanced visco-elastic and rheological behavior of epoxy composites reinforced with polyimide nanofiber10.1016/j.nanoso.2019.100421 ↗
9. Nano to microblend formation in poly(ethylene-co-methyl acrylate)/ poly(vinylidene fluoride) blend and investigation of its anomalies in rheological properties10.1016/j.nanoso.2020.100487 ↗
10. Sobotka · 2014
11. Confinement effects at nanoscale in natural rubber composites: influence on macroscopic properties10.1002/app.49838 ↗
12. Liquid rubber and silicon carbide nanofiber modified epoxy nanocomposites: Volume shrinkage, cure kinetics and properties10.1016/j.compscitech.2014.07.017 ↗
13. Synergistic effect of multi walled carbon nanotubes and reduced graphene oxides in natural rubber for sensing application10.1039/c3sm51978c ↗
14. Manufacture technology and anisotropic behaviour of elastic-porous metal rubber10.1016/j.ijlmm.2019.08.005 ↗
15. Compression mechanics of nickel-based superalloy metal rubber10.1016/j.msea.2013.05.064 ↗
16. Mechanical behaviors of quasi-ordered entangled aluminum alloy wire material10.1016/j.msea.2009.07.022 ↗
17. Impact behavior of entangled steel wire material10.1016/j.matchar.2009.03.001 ↗
18. Structure deformation and failure of sintered steel wire mesh under torsion loading10.1016/j.matdes.2008.09.007 ↗
19. Stretching behaviors of entangled materials with spiral wire structure10.1016/j.matdes.2012.10.003 ↗
20. Buratti · 2010
21. Mechanical properties of monofilament entangled materials10.1002/adem.201100356 ↗
22. Compressive and pseudo-elastic hysteresis behavior of entangled titanium wire materials10.1016/j.msea.2010.02.071 ↗
23. Porous titanium materials with entangled wire structure for load-bearing biomedical applications10.1016/j.jmbbm.2011.09.016 ↗
24. Enhancement of the porous titanium with entangled wire structure for load-bearing biomedical applications10.1016/j.matdes.2013.11.019 ↗
25. Compression mechanics of nickel-based superalloy metal rubber10.1016/j.msea.2013.05.064 ↗
26. The mechanics of shape memory alloy metal rubber10.1016/j.actamat.2015.05.031 ↗
27. Design of metal rubber components
28. Study on preparation technology and tests of knitted-dapped metal rubber10.13433/j.cnki.1003-8728.2015.0331 ↗
29. A Theoretical model and experimental investigation of a nonlinear constitutive equation for elastic porous metal rubbers10.1007/s11029-005-0056-2 ↗
30. A micromechanics constitutive model of the metal rubber materials based on the radial and axial combined deformation of the microsprings
31. Theoretical Model of Metal-Rubber
32. Theoretical and experimental investigation on nonlinear characterization of metal rubber10.7498/aps.62.048101 ↗
33. Dynamic mechanical properties and constitutive model of honeycomb materials with random defects under impact loading10.1155/2019/1087919 ↗
34. Research into the effect of cell diameter of aluminum foam on its compressive and energy absorption properties10.1016/j.msea.2006.11.091 ↗
35. Evaluation of cushioning properties of plastic foams from compressive measurements10.1002/pen.760211505 ↗
36. Research on dynamic accumulation effect and constitutive model of aluminum foams under dynamic impact10.1007/s40962-018-0245-0 ↗
37. Mechanical constitutive relation model of expanded polyvinyl alcohol10.1177/096739111502300106 ↗