Recycling of Al chips and Al chips composites using high-pressure torsion
Source abstract
Abstract
Abstract Pure Al chip, Al chip-20% Al2O3, and Al chip-20% SiC samples were recycled using high-pressure torsion (HPT). Influence of the HPT processing on the feasibility of the consolidation, the microstructure evolution, and the hardness of pure Al chip, Al chip-20% Al2O3, and Al chip-20% SiC samples was investigated and compared with those of the as-received Al and HPTed Al solid samples. The HPT processing successfully produces approximately fully dense ultrafine-grained (UFG) microstructure Al and Al composite samples with relative densities ranged from 99.7%–98.3%. Moreover, HPTed recycled UFG Al chip, Al chip-20% Al2O3, and Al chip-20% SiC samples cost was lower by 11%–2678% than that of Al and Al composites samples produced using micro and nano-powders processed by HPT or powder metallurgy (PM). The HPT processing of the Al chip and Al chip composites samples effectively refine and fragmented the Al matrix and reinforcement particles, and so the hardness obviously increases.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Aluminum production and energy10.1016/B0-12-176480-X/00372-7 ↗
2. Energy intensity in the iron and steel industry: a comparison of physical and economic indicators10.1016/S0301-4215(97)00064-5 ↗
3. Herlan · 2013
4. New methods of aluminium and aluminium-alloy chips recycling10.1016/S0924-0136(00)00634-8 ↗
5. A new technique for recycling aluminium scrap10.1016/S0924-0136(02)01133-0 ↗
6. Review of solid state recycling of aluminum chips10.1016/j.resconrec.2017.06.004 ↗
7. Hot profile extrusion of AA-6060 aluminum chips10.1016/j.jmatprotec.2008.07.047 ↗
8. Production of composites from Al and AlMg2 alloy chips10.1016/S0924-0136(97)00390-7 ↗
9. Solid state recycling of aluminium AA6061 alloy chips by hot extrusion10.1088/2053-1591/aaf6e7 ↗
10. Large strain deformation and ultra-fine grained materials by machining10.1016/j.msea.2005.08.139 ↗
11. Characteristics of aluminum 6061-T6 deformed to large plastic strains by machining10.1016/j.msea.2005.08.137 ↗
12. Recycling of AlSi8Cu3 alloy chips via high pressure torsion10.1016/j.msea.2012.09.045 ↗
13. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
14. Using high-pressure torsion for metal processing: fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
15. Improving mechanical properties of chip-based aluminum extrudates by integrated extrusion and equal channel angular pressing (iECAP)10.1016/j.msea.2012.01.081 ↗
16. Analysis of the tribological properties of commercial pure (CP) aluminum developed by chip consolidation through equal channel angular pressing (ECAP)10.4028/www.scientific.net/MSF.969.361 ↗
17. Solid state recycling of aluminum machined chip wastes by compressive torsion processing10.2464/jilm.59.354 ↗
18. Development of a magnesium-alumina composite through cold consolidation of machining chips by high-pressure torsion10.1016/j.jallcom.2018.11.357 ↗
19. ASM International · 1989 · 16 · 761
20. Groover · 2010
21. Production of aluminum-matrix carbon nanotube composite using high pressure torsion10.1016/j.msea.2008.02.022 ↗
22. Effects of ball milling and high-pressure torsion for improving mechanical properties of Al–Al2O3 nanocomposites10.1007/s10853-012-6679-5 ↗
23. Wear resistance and tribological features of pure aluminum and Al–Al2O3 composites consolidated by high-pressure torsion10.1016/j.wear.2013.12.022 ↗
24. Gibson · 1994
25. Unusual hardening in Ti/Al2O3 nanocomposites produced by high-pressure torsion followed by annealing10.1016/j.msea.2011.09.056 ↗
26. Microstructural refinement and wear property of Al–Si–Cu composite subjected to extrusion and high-pressure torsion10.1016/j.msea.2014.09.011 ↗
27. Dry and lubricated wear resistance of mechanically alloyed aluminium base sintered composites10.1016/S0043-1648(00)00553-6 ↗
28. Investigation of tribological and mechanical properties Al2O3–SiC reinforced Al composites manufactured by casting or P/M method10.1016/j.matdes.2008.04.014 ↗
29. Compaction of aluminum chips and turnings and of other particulate aluminum scrap with roller presses for secondary aluminum melting without losses
30. Grain size influence on chip formation in high-speed machining of pure iron10.1007/s00170-020-05512-6 ↗
31. Principle of equal-channel angular pressing for the processing of ultra-fine grained materials10.1016/1359-6462(96)00107-8 ↗
32. Microstructure evolution and mechanical properties of Al-1080 Processed by a combination of equal channel angular pressing and high pressure torsion10.1007/s11661-013-1629-7 ↗
33. Microstructural evolution in commercial purity aluminum during high-pressure torsion10.1016/j.msea.2005.08.044 ↗
34. Two-step SPD processing of a trimodal Al-based nano-composite10.1007/s11661-015-3151-6 ↗
35. Effect of high-pressure torsion processing on the microstructure evolution and mechanical properties of consolidated micro-size Cu and Cu-SiC powders10.1016/j.apt.2017.05.020 ↗
36. Severe plastic deformation processing and high strain rate super plasticity in an aluminum matrix composite10.1016/S1359-6462(99)00020-2 ↗
37. Homogenization of metal matrix composites by high-pressure torsion10.1007/s11661-005-0281-2 ↗
38. Hall · Proc. Phys. Soc. B · 1951 · 64 · 74710.1088/0370-1301/64/9/303 ↗
39. Petch · J. Iron Steel Inst. · 1953 · 174 · 25
40. Taylor · Proc. R. Soc. A · 1934 · 145 · 362
41. Microstructure of ultrafine-grained fcc metals produced by severe plastic deformation10.1016/j.cap.2005.07.039 ↗