Evolution of texture and precipitates in Al–Cu–Li alloy during deformation and heat treatment and its effect on anisotropy
Source abstract
Abstract
Abstract Al–Li alloy offersa great advantage over traditional alloys and it is the ideal material for today’s aerospace industry. Therefore, here we examined the Al–Cu–Li alloy as the third generation of Al–Li alloy. Deformation and heat treatment on the texture and precipitate type and distribution of Al–Cu–Li alloy were studied by mechanical properties test, XRD, and TEM analysis. The effect of texture and precipitate on the plane anisotropy of yield strength was discussed. The results showed thatBrass texture was mainly formed in the deformation process. On the one hand, increasethe pass deformation or cross rolling,the total volume fraction of the texture (S{123}〈634〉, G{011}〈100〉, {011}〈011〉) was increased, which lowered thesheet anisotropy. While on the other hand, the δ′ phase precipitated rapidly during solution treatment and easily caused a coplanar slip, increasing plane anisotropy. However, owing to the difference distribution of the aged precipitated T1 on the two group of {111} habit plane, the strengthening effect of the Al–Cu–Li alloy sheet was weak at 45° direction, but stronger atthe rolling direction (0°) and transverse direction (90°).
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Development and characterization of Al–Li alloys10.1016/j.msea.2006.01.045 ↗
2. Effect of aging treatment on microstructure and mechanical properties of 2A97 Al–Li alloy10.1016/S1003-6326(14)63332-X ↗
3. Microstructural evolution during ageing of Al–Cu–Li-X alloys
4. Fabrication methods to manufacture isotropic Al–Li alloys and products for space and applications10.1016/S0921-5093(98)00827-2 ↗
5. The evolution of Al–Li base products for aerospace and space applications10.1007/s11661-012-1155-z ↗
6. Recent developments in advanced aircraft aluminiumalloys10.1016/j.matdes.2013.12.002 ↗
7. Wanhill · 2014 · 27
8. Overview ofconstitutive laws, kinematics, homogenization and multiscale methods in crystal plasticityfinite-element modeling: theory, experiments, applications10.1016/j.actamat.2009.10.058 ↗
9. Characterized behavior and corresponding yield criterion of anisotropic sheet metals10.1016/S0921-5093(02)00453-7 ↗
10. Evolution of texture, microstructure and mechanical property anisotropy in an Al–Li–Cu alloy10.1016/S0921-5093(98)00822-3 ↗
11. Texture and mechanical property anisotropy in an Al-Mg-Si-Cu alloy10.1016/S0921-5093(99)00549-3 ↗
12. Modelling of anisotropy for Al–Li 2099 T83 extrusion and effect of precipitate density10.1016/j.msea.2016.07.081 ↗
13. Influence of Mg, Ag and Zn minor solute additionson the precipitation kinetics and strengthening of an Al–Cu–Li alloy
14. Modeling the evolution of anisotropy in Al–Li alloys: application to Al–Li 2090-T8E4110.1016/S0749-6419(01)00073-0 ↗
15. Hot rolling textures of Al–Cu–Li and Al–Zn–Mg–Cu aeronautical alloys: experiments and simulations to high strains10.1016/j.msea.2010.07.095 ↗
16. Experimental investigation of tensile properties and anisotropy of 1420, 8090 and 2060 Al–Li alloys sheet undergoing different strain rates and fibre orientation: a comparative study
17. Wanhill · 2014 · 28
18. Srivatsan · 2014 · 305
19. Jata · 2014 · 139
20. Strengthening mechanisms, deformation behavior, and anisotropic mechanicalproperties of Al–Li alloys: a review10.1016/j.jare.2017.12.004 ↗
21. Influence of the precipitation state on the cold-rolling texture in 8090 Al–Li material10.1016/0921-5093(91)90861-G ↗
22. Effect of composition on crystallographic texture in hot-rolled Al–Li–Cu alloys10.1016/0921-5093(95)10064-4 ↗
23. Quantitative description of the T1 morphology and strengthening mechanisms in an age-hardenable Al–Li–Cu alloy
24. Microstructure and mechanical properties of a 2050 Al–Li alloy sheet
25. Role of Cu on the mechanical properties and microstructures evolution ofAl-xCu-1Li-0.4Mg-1Zn-0.1Zr alloys10.1016/j.msea.2020.139833 ↗
26. Microstructure evolution and mechanical properties ofAl−3.6Cu−1Li alloy via cryorolling and aging10.1016/S1003-6326(20)65430-9 ↗
27. Precipitation of T1phase in 2198Al–Li alloy studied byatomic-resolution HAADF-STEM
28. Effects of coarse Al2CuLi phase on the hot deformation behavior ofAl–Li alloy10.1016/j.jallcom.2019.152469 ↗
29. Computer simulation of morphological evolution and coarsening kinetics of δ′(Al3Li) precipitates in Al–Li alloys10.1016/S1359-6454(98)00058-5 ↗
30. The determination of the interfacial characteristics between δ′ phase and matrix in 1420 alloy by SAXS10.1023/A:1006710927118 ↗
31. Microscopic phase-field simulation of antisite defect evolution of Al3Li phase
32. Ageing response of a Al–Cu–Li 2198 alloy10.1016/j.matdes.2014.04.063 ↗
33. Effect of aging time on the microstructure evolution and mechanical property in an Al–Cu–Li alloy sheet10.1016/j.msea.2018.10.064 ↗
34. Effects of heat treatment on the microstructure and mechanical properties of extruded 2196 Al–Cu–Li alloy10.1016/j.matdes.2020.108746 ↗
35. Atomic structure of T1 precipitates in Al−Li−Cu alloys revisited with HAADF-STEM imaging and small-angle x-ray scattering10.1016/j.actamat.2010.09.044 ↗
36. Electrochemical behavior of the T1 (Al2CuLi) intermetallic compound and its role in localized corrosion of Al-2% Li-3% Cu alloys10.5006/1.3293500 ↗
37. T1 (Al2CuLi) precipitation in Aluminium–Copper–Lithium Alloys10.1179/030634572790445975 ↗
38. The anisotropy and texture of Al–Li alloys10.4028/www.scientific.net/MSF.217-222.647 ↗
39. Effects of microstructure on the incipient fatigue and fretting crack processes in Al–Cu–Li alloys10.1520/JAI102530 ↗
40. Effect of asymmetric rolling and subsequent ageing on the microstructure, texture and mechanical properties of the Al–Cu–Li alloy10.1016/j.jallcom.2020.155445 ↗
41. Mechanism of Al2CuLi (T1) nucleation and growth10.1007/BF02656798 ↗
42. Effect of stretching on the precipitation kinetics of an Al-2.0Li-2.8Cu-0.5Mg(−0.13Zr) alloy10.1007/BF02659485 ↗
43. The contribution of T1 phase to the anisotropy of Al–Li alloy