journal article·2021-06-01Open access

Microstructure and mechanical properties of superelastic NiTi fiber reinforced NiTi/(Al3Ti+Al3Ni) metal-intermetallic laminated (SFR-MIL) composites

Fuwei Kang, Ximeng Zhang, Fahong Zhang, Enhao Wang, Yang Cao, Wei Jiang, Liping Wang, Yuqiang Han, Chunfa Lin

Materials Research Express· Volume 8· Issue 6

Abstract

Abstract In this work, a novel superelastic NiTi fiber reinforced NiTi/(Al3Ti+Al3Ni) metal-intermetallic laminated (SFR-MIL) composites was fabricated via vacuum hot pressing method. In order to accurately determine the reaction products of the fabrication process, the microstructure and phase constituents were analyzed and determined using scanning electron microscopy (SEM), energy dispersive spectroscope (EDS) and x-ray diffraction (XRD). Results showed that Al3Ti and Al3Ni were formed during fabrication process. In addition, the quasi-static tensile testing results indicated the average UTS and failure strain of SFR-MIL composite are 377.0 MPa and 15.4%, respectively. The compressive tests of SFR-MIL composites manifested that the average peak compressive strength of this class of materials with load perpendicular to layers is 1114.3 MPa, equivalent to or higher than that of some other laminated composites. Then, the fracture mechanisms are discussed, and the results showed that the reaction band is the possible crack initiation due to the stress concentration, and the major fracture mechanisms are intergranular and transgranular fracture modes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Intermetallics and Advanced Alloy Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Microstructure evolution in metal-intermetallic laminate (MIL) composites synthesized by reactive foil sintering in air10.1007/s11661-001-0237-0 ↗
2. Improved fracture toughness of NiTi shape memory alloy fiber-reinforced Ti-Al metal-intermetallic-laminate composite10.1016/j.jallcom.2017.12.258 ↗
3. Mechanical response of titanium tri-aluminide intermetallic alloy10.1016/j.msea.2017.09.015 ↗
4. Hot processing maps and microstructural characteristics of A357 alloy10.1007/s11665-020-05210-0 ↗
5. Hot deformation characteristics of Ti43.5Al5Nb1V1Y alloy by hot press sintering10.1088/2053-1591/ab57aa ↗
6. Microstructure evolution and mechanical performances of SiCf reinforced (Al3Ti + Al3Ni)-Based metallic–intermetallic laminate composite10.1007/s12540-020-00942-z ↗
7. Damage evolution in Ti6Al4V-Al3Ti metal-intermetallic laminate composites10.1016/j.msea.2006.05.037 ↗
8. Effects of ductile phase volume fraction on the mechanical properties of Ti-Al3Ti metal-intermetallic laminate (MIL) composites10.1016/j.msea.2010.12.087 ↗
9. Structural and mechanical properties of metallic-intermetallic laminate composites produced by explosive welding and annealing10.1016/j.matdes.2011.09.030 ↗
10. Synthetic multifunctional metallic-intermetallic laminate composites10.1007/s11837-005-0229-4 ↗
11. Resistance-curve and fracture behavior of Ti–Al3Ti metallic–intermetallic laminate (MIL) composites10.1016/S1359-6454(03)00108-3 ↗
12. Interface tensile and fracture behavior of the Ti/Al3Ti Metal-Intermetallic Laminate (MIL) composite under quasi-static and high strain rates10.1016/j.msea.2016.04.020 ↗
13. Failure of metallic-intermetallic laminate composites under dynamic loading10.1063/1.3686471 ↗
14. Modeling the elastic properties and damage evolution in Ti-Al3Ti metal-intermetallic laminate (MIL) composites10.1016/j.msea.2003.09.074 ↗
15. Use of Brazilian disk test to determine properties of metallic-intermetallic laminate composites10.1007/s11837-010-0008-8 ↗
16. Fracture toughness of ceramic-fiber-reinforced metallic-intermetallic-laminate (CFR-MIL) composites10.1016/j.msea.2015.10.018 ↗
17. Microstructure evolution and fracture behavior of innovative Ti-(SiCf/Al3Ti) laminated composites10.1016/j.jallcom.2018.01.392 ↗
18. Synthesis and mechanical properties of novel Ti-(SiCf/Al3Ti) ceramic-fiber-reinforced metal-intermetallic-laminated (CFR-MIL) composites10.1016/j.jallcom.2017.06.057 ↗
19. Fabrication, interfacial characterization and mechanical properties of continuous Al2O3 ceramic fiber reinforced Ti/Al3Ti metal-intermetallic laminated (CCFR-MIL) composite10.1016/j.msea.2017.02.024 ↗
20. Direct tensile behavior of shape-memory-alloy fiber-reinforced cement composites10.1016/j.conbuildmat.2015.11.015 ↗
21. Damping, tensile, and impact properties of superelastic shape memory alloy (SMA) fiber-reinforced polymer composites10.1016/j.compositesb.2009.10.009 ↗
22. Bio-inspired design of SiC f -reinforced multi-layered Ti-intermetallic composite10.1016/j.matdes.2016.03.138 ↗
23. Microstructure and mechanical properties of continuous ceramic SiC and shape memory alloy NiTi hybrid fibers reinforced Ti-Al metal-intermetallic laminated composite10.1016/j.jallcom.2017.09.267 ↗
24. Microstructure evolution in Fe-based-aluminide metallic-intermetallic laminate (MIL) composites10.1016/j.msea.2015.10.019 ↗
25. Microstructure Evolution in pure Ni and Invar-based Metallic-Intermetallic Laminate (MIL) Composites10.1016/j.msea.2016.11.033 ↗
26. Fabrication, microstructure and mechanical properties of novel NiTi/(Al3Ti+Al3Ni) laminated composites10.1016/j.jallcom.2018.10.277 ↗
27. Fabrication, mechanical properties and damping capacity of shape memory alloy NiTi fiber-reinforced metal–intermetallic–laminate (SMAFR-MIL) composite10.1016/j.matdes.2016.01.130 ↗
28. Interfacial microstructure characterization and mechanical behavior of NiTi fiber reinforced Al3Ti composite10.1016/j.matdes.2018.01.060 ↗
29. Diffusion in the Ti-Al system10.1016/S1359-6454(99)00400-0 ↗
30. A study of shape memory alloy NiTi fiber/plate reinforced (SMAFR/SMAPR) Ti-Al laminated composites10.1016/j.jallcom.2016.12.062 ↗