journal article·2021-06-01Open access

Effect of grain boundary engineering on corrosion behavior of nickel-based alloy 825 in sulfur environment

Zhou Fan, Yidong Zhang, Xiaogang Hu, Dawei Yang, Yang Wang, Jianyi Liu

Materials Research Express· Volume 8· Issue 6

Abstract

Abstract Grain boundary engineering (GBE) by appropriate deformation and heat treatment processes was applied to nickel-based alloy 825 due to its excellent corrosion resistance. The microstructure of nickel-based alloy was analyzed by electron backscatter diffraction (EBSD) and the effect of GBE on the corrosion resistance in high sulfur-containing environments was studied by electrochemical method. The results show that the ratio of low Σvalue coincidence site lattice (CSL) grain boundary is obviously improved from 47.1% to 65.5%. The special angle grain boundaries Σ3, Σ9, Σ27 and so on are randomly distributed on the network of the large angle grain boundaries, which destroy the connectivity of the original grain boundary network, and effectively block the corrosion cracking of the material along them. The corrosion resistance of nickel-based alloy 825 in high sulfur environments is enhanced verified by polarization curve and scanning electrochemical microscope, providing references for corrosion protection during the exploitation of high sulfur gas reservoirs.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Effect of flow velocity on pipeline steel corrosion behaviour in H2S/CO2 environment with sulphur deposition10.1080/1478422X.2018.1476818 ↗
2. The elemental sulfur deposition and its corrosion in high sulfur gas fields10.3787/j.issn.1000-0976.2013.09.018 ↗
3. Corrosion behavior of P110 Tubing steel in the CO2-saturated simulated oilfield formation water with element sulfur addition10.1016/S1875-5372(18)30166-8 ↗
4. Influence of Elemental Sulfur on the Corrosion Behavior of Alloy G3 in H2S+CO2 Saturated Chloride Solution10.1016/j.electacta.2017.02.114 ↗
5. Structure and Corrosion Resistance of Chemical Plated Nickel Base Alloys10.3969/j.issn.2095-1744.2007.01.002 ↗
6. Effect of aging temperature on Microstructure and mechanical properties of 2906 super duplex stainless steel10.13289/j.issn.1009-6264.2010.12.014 ↗
7. High temperature magnetic strengthening in iron-based alloys: Magnetic effects on deformation and fracture, revisited10.3139/146.110073 ↗
8. Grain boundary engineering: historical perspective and future prospects10.1007/s10853-011-5393-z ↗
9. Suppression of intergranular corrosion by surface grain boundary engineering of 304 austenitic stainless steel using laser peening plus annealing10.1016/j.mtcomm.2020.101572 ↗
10. Effects of strain and annealing processes on the distribution of Σ3 boundaries in a Ni-based superalloy10.1016/j.scriptamat.2006.03.014 ↗
11. Effect of single-step strain and annealing on grain boundary character distribution and intergranular corrosion in alloy 69010.1007/s10853-007-2164-y ↗
12. Effect of the pre-existing carbides on the grain boundary network during grain boundary engineering in a nickel-based alloy10.1016/j.matchar.2014.02.011 ↗
13. Implication of grain boundary engineering on high temperature hot corrosion of alloy 61710.1016/j.corsci.2016.01.019 ↗
14. The effect of grain-boundary-engineering-type processing on oxygen-induced cracking of IN71810.1016/S0921-5093(02)00753-0 ↗
15. The relationship between the fracture toughness and grain boundary character distribution in polycrystalline NiAl10.1016/S0966-9795(02)00167-X ↗
16. Appling grain boundary engineering to Alloy 690 tube for enhancing intergranular corrosion resistance10.1016/j.jnucmat.2011.06.017 ↗
17. Effect of grain boundary engineering on corrosion fatigue behavior of 316LN stainless steel in borated and lithiated high-temperature water10.1016/j.corsci.2019.01.036 ↗
18. Three-dimensional study of grain boundary engineering effects on intergranular stress corrosion cracking of 316 stainless steel in high temperature water10.1016/j.jnucmat.2017.10.004 ↗
19. On the creep behaviour of grain boundary engineered nickel10.1016/S0921-5093(97)00126-3 ↗
20. Effect of grain boundaries on corrosion resistance of aluminum alloys10.13543/j.bhxbzr.2016.05.010 ↗
21. A grain boundary engineering approach to promote special boundaries in Pb-base alloy10.1016/S0921-5093(02)00919-X ↗
22. On the relationship between grain boundary connectivity, coincident site lattice boundaries, and intergranular stress corrosion cracking10.1016/j.corsci.2004.01.019 ↗
23. A new understanding of intergranular stress corrosion cracking resistance of pipeline steel through grain boundary character and crystallographic texture studies10.1016/j.corsci.2008.10.006 ↗
24. Anisotropic behavior of grain boundaries10.4028/www.scientific.net/MSF.482.63 ↗
25. The Optimization Research Developments of Grain Boundary Character Distribution (GBCD) of Polycrystalline Metal Materials10.3321/j.issn:1002-185x.2007.08.044 ↗
26. Application of grain boundary engineering to improve intergranular corrosion resistance in a Fe–Cr–Mn–Mo–N high-nitrogen and nickel-free austenitic stainless steel10.1007/s40195-020-01000-8 ↗
27. Strain-annealing based grain boundary engineering to evaluate its sole implication on intergranular corrosion in extra-low carbon type 304L austenitic stainless steel10.1007/s11661-018-4608-1 ↗