journal article·2021-09-01Open access

Manufacture of sustainable fired shale bricks using sewage sludge as raw material

Jian Wu, Shuai-shuai Yin, Li-dan Zhang, Xin Song

Materials Research Express· Volume 8· Issue 9

Abstract

This paper assessed the use of shale collected from western China and the incorporation of sewage sludge for manufacturing fired shale bricks, which could reduce the environmental impact produced in the mining process of traditional raw materials. Chemical constituents and mineral composition of shale and sewage sludge were characterized by x-ray fluorescence spectrophotometer (XRF) and x-ray diffractometer (XRD), the analysis indicated that only the shale was a fit bloating material, while the sewage sludge could only be used as additive. Fired shale brick specimens containing 0%–30% (wt) of sewage sludge were fired at temperatures ranging from 920 to 950 °C. The tests revealed that with the increase of replacement ratio of sewage sludge, the water content and shrinkage rate increased, whereas plasticity index, bulk density and compressive strength decreased. Comprehensively considering the physical and mechanical properties of specimen, the optimum replacement ratio of sewage sludge and sintering temperature were determined to be 15% (wt) and 940 °C, respectively. Scanning electron microscope (SEM) analysis indicated that specimens with sewage sludge contained higher amounts of micropores, which could improve the thermal insulation properties of the specimen. Through the analysis of the experimental results, it could be concluded that the addition of sewage sludge resulted in the successful manufacture of qualified fired shale bricks.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Traditional manufacturing of clay brick used in the historical buildings of Diyarbakir (Turkey)10.1016/j.foar.2017.06.003 ↗
2. Mechanical properties and mineralogy of artisanal clay bricks manufactured in Dididi, Limpopo, South Africa10.1016/j.conbuildmat.2019.07.247 ↗
3. In-plane shear capacity of tuff masonry walls with traditional and innovative composite reinforced mortars (CRM)10.1016/j.conbuildmat.2019.03.133 ↗
4. Estimating elastic modulus of tuff and brick masonry: a comparison between on-site and laboratory tests10.1016/j.conbuildmat.2019.01.224 ↗
5. Environmental effects of using clay bricks produced with sewage sludge: leachability and toxicity studies10.1016/j.wasman.2011.12.024 ↗
6. Degraded municipal solid waste as partial substitute for manufacturing fired bricks10.1016/j.conbuildmat.2017.08.067 ↗
7. Sustainable use of tannery sludge in brick manufacturing in Bangladesh10.1016/j.wasman.2016.12.041 ↗
8. On destruction of solid clay brick to land resources and countermeasures
10. Durability performance and engineering properties of shale and volcanic ashes concretes10.1016/j.conbuildmat.2015.01.020 ↗
11. Experimental study on early cracking sensitivity of lightweight aggregate concrete10.1016/j.conbuildmat.2016.12.069 ↗
12. An experimental study on strength and toughness of steel fiber reinforced expanded-shale lightweight concrete10.1016/j.conbuildmat.2018.06.178 ↗
13. Testing and prediction of shear performance for steel fiber reinforced expanded-shale lightweight concrete beams without web reinforcements10.3390/ma12101594 ↗
14. Calcined illite-chlorite shale as supplementary cementing material: thermal treatment, grinding, color and pozzolanic activity10.1016/j.clay.2019.105143 ↗
15. Application of burnt clay shale as pozzolan addition to lime mortar10.1016/j.cemconcomp.2012.01.001 ↗
16. Effect of thermal treatment on reactivity and mechanical properties of alkali activated shale–slag binder10.1016/j.conbuildmat.2015.02.024 ↗
17. Use of pre-wetted lightweight fine expanded shale aggregates as internal nutrient reservoirs for microorganisms in bio-mineralized mortar10.1016/j.cemconcomp.2017.09.003 ↗
18. Application of sewage sludge in the manufacturing of ceramic tile bodies10.1016/j.clay.2005.05.001 ↗
19. Utilisation of sludge waste from water treatment for ceramic products10.1016/j.conbuildmat.2012.12.041 ↗
20. A comparative study on industrial waste fillers affecting mechanical properties of polymer-matrix composites10.1088/2053-1591/3/10/105302 ↗
21. UV accelerated aging and sewage sludge ash particle effects on mode I interlaminar fracture properties of glass fiber/epoxy composites10.1007/s13726-021-00932-x ↗
22. Fabrication, microstructure and properties of bricks fired from lake sediment, cinder and sewage sludge10.1016/j.conbuildmat.2016.05.155 ↗
23. Utilization of sewage sludge, oven slag and fly ash in clay brick production10.1016/j.conbuildmat.2018.10.231 ↗
24. Application of water treatment sludge in the manufacturing of lightweight aggregrate10.1016/j.conbuildmat.2013.02.016 ↗
25. Kalinski · 2011
26. He · 1995 · 336
27. Fired brick is an energy saving wall material