Analysis and improvement of self-heating effect based on GaN HEMT devices
Source abstract
Abstract
Abstract Gallium nitride high electron mobility transistor (GaN HEMT) applications in high-power and high-frequency environments can lead to high device temperatures due to the self-heating effect, thus limiting device performance and reliability. In order to address this problem, this paper changes the material and structure of the device. It successfully reduces the maximum temperature of the device to 335 K by using a new structure of the diamond substrate, diamond heat sink layer, and InGaN insertion layer. Simulation results show that the new structure has a 35% reduction in maximum temperature, a 61% increase in current, a 37% improvement in maximum transconductance, and a 35% improvement in current collapse. At the same time, the new structure also improves the electron mobility of the channel.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: GaN-based semiconductor devices and materials · Silicon Carbide Semiconductor Technologies · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. A broadband hybrid GaN cascode low noise amplifier for WiMax applications10.1002/mmce.21456 ↗
2. Reliable noise modeling of GaN HEMTs for designing low-noise amplifiers10.1002/jnm.2585 ↗
3. Analytical model for the potential and electric field distributions of AlGaN/GaN HEMTs with gate-connected FP based on equivalent potential method10.1016/j.spmi.2019.106327 ↗
4. Nanoscale electro-thermal interactions in AlGaN/GaN high electron mobility transistors10.1063/1.5123726 ↗
5. Buffer-induced current collapse in GaN HEMTs on highly resistive Si substrates IEEE Electr10.1109/LED.2018.2864562 ↗
6. Control of the in-plane thermal conductivity of ultra-thin nanocrystalline diamond films through the grain and grain boundary properties10.1016/j.actamat.2015.09.045 ↗
7. Thermal conductivity of crystalline AlN and the influence of atomic-scale defects10.1063/1.5097172 ↗
8. An over 20-W/mm S-band InAlGaN/GaN HEMT with SiC/diamond-bonded heat spreader10.1109/LED.2018.2884918 ↗
9. Electrical and thermal performance of AlGaN/GaN HEMTs on diamond substrate for RF applications, IEEE Compound semiconductor integrated circuit symposium (CSICS)10.1109/CSICS.2013.6659225 ↗
10. A study on the nucleation and MPCVD growth of thin, dense, and contiguous nanocrystalline diamond films on bare and Si3N4- coated N-polar GaN10.1088/1361-6641/ab4f16 ↗
11. A study on the growth window of polycrystalline diamond on Si3N4- coated N-polar GaN10.3390/cryst9100498 ↗
12. Development of polycrystalline diamond compatible with the latest N-polar GaN mm-wave technology10.1021/acs.cgd.0c01319 ↗
13. Improved interface state density by low temperature epitaxy grown AlN for AlGaN/GaN metal-insulator-semiconductor diodes mater10.1016/j.mseb.2020.114707 ↗
14. Dependence of self-heating effect on passivation layer in AlGaN/GaN HEMT devices, international semiconductor device research symposium (ISDRS)10.1109/ISDRS.2011.6135303 ↗
15. Self-heating effects in gan high electron mobility transistor for different passivation material10.14429/dsj.70.16360 ↗
16. A numerical investigation of heat suppression in HEMT for power electronics application10.1007/s12633-020-00647-3 ↗
17. AlN passivation over AlGaN/GaN HFETs for surface heat spreading10.1109/TED.2010.2044675 ↗
18. Effect of self-heating on the drain current transient response in AlGaN/GaN HEMTs10.1109/LED.2014.2300856 ↗
19. Simulation of temperature and electric field-dependent barrier traps effects in AlGaN/GaN HEMTs10.1088/0268-1242/30/1/015010 ↗