journal article·2023-11-01Open access

Characterization and optimization of abrasive water jet machining parameters of aluminium/silicon carbide composites

K Gowthama, H M Somasheker, B Suresha, P Bhagat Singh, N Rajini, Faruq Mohammad, Hamad A Al-Lohedan, Ahmed A Soleiman

Materials Research Express· Volume 10· Issue 11

Abstract

Abstract Due to the complexity of high temperature and cutting tool wear, most machined components are still facing problems in terms of harder functional fillers that reinforce aluminium matrix composites. Conversely, abrasive water jet machining (AWJM) incredibly useful for the cutting of anisotropic and non-homogeneous metal matrix composites. In this research article, silicon carbide (SiC) particulates were utilized as reinforcement in the AA6026 matrix material (AA6026/SiC) and machined using AWJM under different process parameters namely SiC loading, traverse speed and stand-off distance. Two different compositions of SiC (4, and 8 wt%) were considered to fabricate AA6026 composites using the stir casting. In addition, outputs have been examined, e.g., surface roughness, material removal rate, and kerf angle. An optical microscope, scanning electron microscope, Brinell hardness tester and universal testing machine have been used to characterize the matrix material AA6026 and its composites. Microstructural analysis revealed that the inclusion of SiC particulates in AA6026 affects the very fine grain size of the composite. Furthermore, the 8 wt% composite exhibits the evolution of the Al-Si eutectic phase during solidification. Processing of these composites was performed using the L27 orthogonal geometry, successfully improving the parameters of the abrasive water jet process. The output response shows that reducing the SiC load improves the surface roughness under the key parameters of traverse speed and stand-off distance. However, increasing the SiC loading increases the material removal rate and kerf angle under the key parameters, namely traverse speed, and stand-off distance.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Erosion and Abrasive Machining · Advanced Surface Polishing Techniques · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Mechanical properties evaluation on hybrid AA6026 composites added with nanoclay and carbon fibers10.1007/s42823-023-00464-9 ↗
2. Effect of homogenization temperature on microstructure and mechanical properties of Al-Mg-Si alloy containing low-melting point elements10.1016/j.jallcom.2022.163719 ↗
3. Microstructural and mechanical characteristics of in situ metal matrix composites10.1016/S0927-796X(00)00024-3 ↗
4. Aluminium matrix composites: challenges and opportunities10.1016/j.ceramint.2010.07.028 ↗
5. Aluminium matrix composites: challenges and opportunities10.1007/BF02717141 ↗
6. Improving fatigue strength of metals using abrasive water jet peening10.1080/10910340600710105 ↗
7. Production and application of metal matrix composite materials10.1016/S0924-0136(00)00639-7 ↗
8. Metal matrix composites - from science to technological significance10.1016/j.compscitech.2005.05.027 ↗
9. Effect of reinforcement particles on the abrasive assisted electrochemical machining of aluminium-boron carbide-graphit composite, in: procedia eng
10. Thermal effects in laser assisted jet electrochemical machining10.1016/j.cirp.2011.03.132 ↗
11. Laser beam machining-a review10.1016/j.ijmachtools.2007.10.017 ↗
12. Microstructure and mechanical behavior of Ti-6Al-4V produced by rapid-layer manufacturing, for biomedical applications10.1016/j.jmbbm.2008.05.004 ↗
13. Parametric studies of abrasive water jet cutting on surface roughness of silicon nitride materials
14. On the selection of manufacturing methods illustrated by an overview of separation techniques for sheet materials10.1016/S0007-8506(07)61127-5 ↗
15. Effect of feed rate on surface roughness in abrasive water jet cutting applications10.1016/j.jmatprotec.2004.01.013 ↗
16. Design optimization of cutting parameters for turning operations based on the taguchi method10.1016/S0924-0136(98)00079-X ↗
17. Electrodeposition of copper on titanium wires: Taguchi experimental design approach10.1016/j.jmatprotec.2008.03.021 ↗
18. An application of the taguchi method (robust design) to environmental engineering: evaluating advanced oxidative processes in polyester-resin wastewater treatment10.4236/ajac.2014.513092 ↗
19. Application of taguchi method in the optimization of cutting parameters for surface roughness in turning10.1016/j.matdes.2006.01.008 ↗
20. Response surface methodology: process and product optimization using designed experiments10.2307/1270613 ↗
21. Experimental investigations on mechanical and microstructural properties of Al2O3/SiC reinforced hybrid metal matrix composite
22. Effect of microstructure, mechanical and wear on Al-CNTs/graphene hybrid MMC’s10.1080/2374068X.2021.1927646 ↗
23. Investigation on the mechanical, tribological, morphological and machinability behavior of stir-casted Al/SiC/Mo reinforced MMCs10.1016/j.jmrt.2021.03.034 ↗
24. Abrasive wear performance of laser cladded Inconel 625 based metal matrix composites: effect of the vanadium carbide reinforcement phase content10.1016/j.surfcoat.2021.127975 ↗
25. Evaluation of microstructure, hardness, and tensile properties: A comparative study of stir cast and extruded Al7005/glass-/fly-ash-reinforced hybrid MMCs10.1155/2021/8601484 ↗
26. Moisture effect on SiCp/6061 Al MMC: dissolution of interfacial Al4C310.1016/S1359-6462(97)00133-4 ↗
27. Influence of interface compounds on interface bonding characteristics of aluminium and silicon carbide10.1016/j.matchar.2009.04.005 ↗
28. Effect of entrained air in abrasive water jet micro-machining: reduction of channel width and waviness using slurry entrainment10.1016/j.wear.2015.10.008 ↗
29. Abrasive water jet micro-machining of channels in metals: comparison between machining in air and submerged in water10.1016/j.ijmachtools.2014.09.012 ↗
30. Optimization of abrasive water jet machining process parameters
31. Recent progress trend on abrasive water jet cutting of metallic materials: a review10.3390/app11083344 ↗
32. A study of delamination on graphite/epoxy composites in abrasive water jet machining10.1016/j.compositesa.2008.04.001 ↗