journal article·2024-05-01Open access

Behaviour of sewage sludge based lightweight aggregate in geopolymer concrete

Sathya Thukkaram, Ammasi Arun Kumar

Materials Research Express· Volume 11· Issue 5

Abstract

Abstract The global challenge of sewage sludge disposal has encouraged innovative solutions aimed at reducing environmental impact while simultaneously addressing the growing demand for sustainable construction materials. This study aimed to develop treated raw sewage sludge-based lightweight aggregates with strength comparable to commercially available aggregates. Two methods, namely cold bonding and sintering, were employed for the formation of aggregates. The sintering method produced well-formed and hard aggregates, while the cold bonded aggregates exhibited weakness and disintegrated under the slightest pressure. The optimal mix for quality aggregates was found to be 10%–20% sewage sludge, 70%–80% fly ash, and 10% lime using the sintering method. In the sintering method, an increase in sewage sludge content resulted in the reduction of bulk density and specific gravity by 13% and 4% respectively due to the high organic content in sewage sludge, volatile gas release, and porous structure formation. When 10% to 20% sewage sludge content was added, water absorption of the aggregates also increased by approximately 2%. Physical properties such as individual pellet strength. aggregate crushing value reduced by 18%, 20% respectively and the aggregate impact value increased by about 9%. These aggregates were then used to produce lightweight geopolymer concrete, which exceeded the design strength by 7% for the aggregate containing 20% sewage sludge and demonstrated excellent physical properties. The use of waste-based aggregates offers advantages including savings in cost, sustainability, resource conservation, waste reduction, and reduced environmental impact, making them a valuable alternative to natural crushed stone aggregates in specific applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Impact of construction material on environment10.1007/978-3-030-76073-1_22 ↗
2. Production of portland cement clinker from french municipal solid waste incineration bottom ash10.1016/j.cscm.2021.e00629 ↗
3. Potential applications of geopolymer concrete in construction: a review10.1016/j.cscm.2021.e00733 ↗
4. Fly ash-based geopolymers containing added silicate waste. a review10.1016/j.ceramint.2017.07.221 ↗
5. Ecofriendly geopolymer concrete: a comprehensive review10.1007/s10098-021-02085-0 ↗
6. Opportunities and challenges in sustainable treatment and resource reuse of sewage sludge: a review10.1016/j.cej.2017.12.149 ↗
7. Characteristics of sewage sludge and its potential applications in the construction industry: a review10.1504/IJEWM.2021.117007 ↗
8. Sewage sludge ash characteristics and potential for use in concrete10.1016/j.conbuildmat.2015.08.122 ↗
9. A review on the manufacturing of lightweight aggregates using industrial by-product10.1051/matecconf/20167801067 ↗
10. Structural concrete using sintered fly ash lightweight aggregate: a review10.1016/j.conbuildmat.2017.08.005 ↗
11. Artificial lightweight aggregates made from pozzolanic material: a review on the method, physical and mechanical properties, thermal and microstructure10.3390/ma15113929 ↗
12. Experimental Study on Lightweight Concrete Using Pumice Aggregate
13. Experimental investigations on water absorption and mechanical properties of expanded perlite mortar under accelerated and natural aging conditions10.1088/2053-1591/ac79a7 ↗
14. Analysis of the properties of recycled aggregates concrete with lime and metakaolin10.1088/2053-1591/acf983 ↗
15. Overview of artificial lightweight aggregates - a review
16. Fly ash utilization in lightweight aggregates for sustainable construction10.1007/978-981-13-3317-0_3 ↗
17. Durability of lightweight concretes with lightweight fly ash aggregates10.1016/j.conbuildmat.2010.09.022 ↗
18. Production of lightweight aggregates for construction industry from industrial byproducts: a review10.1007/978-981-16-9744-9_17 ↗
19. Physical, chemical, and geotechnical properties of coal fly ash: a global review10.1016/j.cscm.2019.e00263 ↗
20. Environmental impacts of sewage sludge ash in construction: leaching assessment10.1016/j.resconrec.2018.04.029 ↗
21. A critical review on utilization of sewage sludge as environmental functional materials10.1016/j.biortech.2022.127984 ↗
22. Characterization and constructive utilization of sludge produced in clari-flocculation unit of water treatment plant10.1088/2053-1591/aab23a ↗
23. Experimental study on lightweight concrete made with expanded clay aggregate and lime10.1007/s41062-021-00549-2 ↗
24. The production and properties of cold-bonded aggregate and its applications in concrete: a review10.1016/j.conbuildmat.2019.07.219 ↗
25. Artificial lightweight aggregate through cold bonding pelletization of fly ash: a review
26. Potential use of UK sewage sludge ash in cement-based concrete
27. The influence of incinerated sewage sludge as an aggregate on the selected properties of cement mortars10.3390/ma14195846 ↗
28. Developing and classifying lightweight aggregates from sewage sludge and rice husk ash10.1016/j.cscm.2020.e00340 ↗
29. A research on sintering characteristics and mechanisms of dried sewage sludge10.1016/j.jhazmat.2008.03.054 ↗
30. Granulated cork with bark characterised as environment-friendly lightweight aggregate for cement based materials10.1016/j.jclepro.2019.04.154 ↗
31. Effects of phosphorus oxide in clinker and cement on the properties of high content belite cement10.14250/cement.69.23 ↗
32. Pressureless spark plasma sintering: a perspective from conventional sintering to accelerated sintering without pressure10.1007/s11106-019-00010-1 ↗
33. Fly ash utilization in lightweight aggregates for sustainable construction10.1007/978-981-13-3317-0_3 ↗
34. Effect of water content, bulk density, and aggregate size on mechanical characteristics of aquults soil blocks and aggregates from subtropical China10.1007/s11368-016-1480-8 ↗
35. ASTM C330-04 · 2004
36. Juillion · 2020
37. Organic chemicals in sewage sludges10.1016/j.scitotenv.2006.04.002 ↗
38. Utilization of sewage sludge, oven slag and fly ash in clay brick production10.1016/j.conbuildmat.2018.10.231 ↗
39. Effect of water absorption and loss characteristics of fine aggregates on aggregate-asphalt adhesion10.1007/s12205-021-1464-0 ↗
40. Long-term water absorption tests for frost insulation materials taking into account frost attack10.1016/j.cscm.2014.02.001 ↗
41. Evaluation of engineering properties of scoria in central Harrat Rahat, Saudi Arabia10.1007/s100640000061 ↗
42. Study on the production factors in the process of production and properties of fly ash-based coarse aggregates10.1155/2021/4309569 ↗
43. IS 2386-4 · 1963
44. ACI 211.2 · 1998
45. An investigation on the effect of curing conditions on the mechanical and microstructural properties of the geopolymer concrete10.1088/2053-1591/ac6be0 ↗