journal article·2024-07-01Open access

Enhanced photoluminescence and structural properties of Zn-doped anatase TiO2 nanoparticles

Moges Tsega Yihunie

Materials Research Express· Volume 11· Issue 7

Abstract

Abstract Undoped and zinc-doped TiO2 nanoparticles (NPs) were synthesized by the sol–gel method. The XRD spectra revealed that both synthesized undoped and Zn-doped TiO2 NPs remain in the anatase phase after calcined at 500 °C. The crystallite size was increased from 17 to 52 nm as the Zn content was increased from 0 to 0.2 mol%, which implies also a decrease of the micro-strain and surface area. The agglomerated spherical-like morphology with a diameter of roughly 10–20 nm was shown by SEM and TEM micrographs. The bandgap values were found to be decreased from 3.2 to 3.0 eV when Zn concentration increased from 0 to 0.2 mol%. A reduction in bandgap with an increase in dopant concentration may due to the increased in crystallite size along with enhanced lattice parameters (i.e., a and c) and d-spacing. From PL spectra, all samples exhibited a broad emission band in the visible region of about 400–500 nm centered at 430 nm. The highest PL emission was obtained for 0.2 mol% Zn doping. The broad PL emission over the visible range is greatly reduced at 0.4 mol% Zn due to concentration quenching. It is suggested that the Zn2+ doping induced oxygen vacancies which could promote the photoluminescence processes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Photocatalysis Techniques · TiO2 Photocatalysis and Solar Cells · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Synthesis and characterizations of rutile-TiO2 nanoparticles derived from chitin for potential photocatalytic applications10.1016/j.vacuum.2018.12.011 ↗
2. Photocatalytic and antibacterial properties of doped TiO2 nanopowders synthesized by sol−gel method10.3390/gels8100673 ↗
3. Hierarchical mesoporous rutile TiO2/C composite nanospheres as lithium-ion battery anode materials10.1016/j.ceramint.2015.08.153 ↗
4. Emerging theory, materials, and screening methods: new opportunities for promoting thermoelectric performance10.1002/andp.201800437 ↗
5. Erbium doped TiO2 interconnected mesoporous spheres as an efficient visible light catalyst for photocatalytic applications10.1016/j.apsusc.2018.01.279 ↗
6. Comparative study of the TiO2 nanopowders prepared from different precursors and chemical methods for heterogeneous photocatalysis application10.1007/s10973-022-11544-9 ↗
7. Engineering of highly efficient tetrahydroquinoline sensitizers for dye-sensitized solar cells10.1016/j.tet.2011.11.004 ↗
8. Phase stabilities and photocatalytic activities of P/Zn–TiO2 nanoparticles able to operate under UV–vis light irradiation10.1016/j.jallcom.2007.10.127 ↗
9. Review of the anatase to rutile phase transformation10.1007/s10853-010-5113-0 ↗
10. Synthesis and characterization of anatase TiO2 nanotubes with controllable crystal size by a simple MWCNT template method10.1016/j.jssc.2012.06.045 ↗
11. Zn and F co-doped TiO2 nanomaterials: synthesis, structure and photocatalytic activity10.1016/j.jallcom.2020.153662 ↗
12. Room temperature photoluminescence of mixed titanium-manganese oxides10.1016/j.jlumin.2017.03.015 ↗
13. Synthesis of TiO2 nanoparticles and decorated multi-wall carbon nanotube (MWCNT) with anatase TiO2 nanoparticles and study of optical properties and structural characterization of TiO2/MWCNT nanocomposite10.1016/j.ijleo.2017.09.078 ↗
14. Highly stable colloidal TiO2 nanocrystals with strong violet-blue emission10.1016/j.jlumin.2016.05.036 ↗
15. Synthesis and optical absorpition properies of anatase TiO2 nanoparticles via a hydrothermal hydrolysis method10.1016/S1875-5372(15)30068-0 ↗
16. Insights into formation of anatase TiO2 nanoparticles from peroxo titanium complex degradation under microwave-assisted hydrothermal treatment10.1016/j.ceramint.2019.07.345 ↗
17. Structural studies and photocatalytic properties of Mn and Zn co-doping on TiO2 prepared by single step sonochemical method10.1016/j.radphyschem.2020.108714 ↗
18. Novel solution routes of synthesis of metal oxide and hybrid metal oxide nanocrystals10.1016/j.pcrysgrow.2011.10.005 ↗
19. Pure and (zinc or iron) doped titania powders prepared by sol–gel and used as photocatalyst10.1016/j.ceramint.2011.04.127 ↗
20. Synthesis and enhanced photocatalytic activity of nitrogen-doped triphasic TiO2 nanoparticles10.1016/j.jphotochem.2019.03.047 ↗
21. Effect of dilute co-doping of Ni and Cr on physical properties of TiO2 nanoparticles10.1016/j.vacuum.2020.109658 ↗
22. Synthesis, characterization and photocatalytic properties under visible light of doped and co-doped TiO2-based nanoparticles10.1016/j.matpr.2019.04.049 ↗
23. Effects of Li+co-doping on properties of Eu3+ activated TiO2 anatase nanoparticles10.1016/j.optmat.2017.06.029 ↗
24. Structural, optical and photoconductivity of Sn and Mn doped TiO2 nanoparticles10.1016/j.jallcom.2014.09.218 ↗
25. Structural, optical and photoluminescence studies of sol-gel synthesized pure and iron doped TiO2 photocatalysts10.1016/j.ceramint.2019.03.170 ↗
26. Optical properties of N and transition metal R (R = V, Cr, Mn, Fe, Co, Ni, Cu, and Zn) codoped anatase TiO210.1016/j.physb.2012.03.068 ↗
27. Synthesis and phenol degradation activity of Zn and Cr doped TiO2 Nanoparticles
28. Structural, optical, and photoluminescence properties of erbium doped TiO2 films10.1016/j.vacuum.2019.108873 ↗
29. Photoconductivity studies on surface modified TiO2 nanoparticles10.1016/j.mssp.2019.04.027 ↗
30. Effect of the electronic state of Ti on M-doped TiO2 nanoparticles (M = Zn, Ga or Ge) with high photocatalytic activities: a experimental and DFT molecular study10.1016/j.mssp.2016.10.050 ↗
31. Photoluminescence and photocatalysis properties of dual-functional Eu3+ doped anatase nanocrystals10.1021/acs.jpcc.6b11013 ↗
32. Nano-titania doped with europium and neodymium showing simultaneous photoluminescent and photocatalytic behavior
33. Photoluminescence enhancement and quenching of Sm, Au Co-doped TiO210.1016/j.optmat.2012.06.013 ↗
34. Effect of zinc doping on the bandgap and photoluminescence of Zn2+-doped TiO2 nanowires10.1016/j.physb.2017.05.027 ↗
35. Effect of zinc concentration in TiO2 nanoparticles synthesized by sol-gel technique for photocatalytic applications10.1016/j.matpr.2020.04.516 ↗
36. Synthesis, characterization and photocatalytic applications of Zn- doped TiO2 nanoparticles by sol–gel method10.1007/s13204-015-0513-8 ↗
37. Cost effective solvothermal method to synthesize Zn-Doped TiO2 nanomaterials for photovoltaic and photocatalytic degradation applications10.3390/catal11060690 ↗
38. A facile synthesis of Zn-doped TiO2 nanoparticles with highly exposed (001) facets for enhanced photocatalytic performance10.1039/D0RA09318A ↗
39. The Scherrer formula for x-ray particle size determination10.1103/PhysRev.56.978 ↗
40. Estimation of lattice strain in ZnO nanoparticles: x-ray peak profile analysis10.1007/s40094-014-0141-9 ↗
41. Structural and electrical properties of M-doped TiO2 (M = Ni, Cu, Zn) relevant to their application as electrolytes for solid oxide fuel cells10.1007/s12039-022-02026-4 ↗
42. Synthesis of Zn doped black TiO2 nanoparticles for degradation of 2, 4, 6 tri-chloro-phenol under visible light10.1016/j.jics.2023.100881 ↗
43. Hydrothermal preparation of uniform nanosize rutile and anatase particles10.1021/cm00052a010 ↗
44. An experimental investigation of extrapolation methods in the derivation of accurate unit-cell dimensions of crystals10.1088/0959-5309/57/3/302 ↗
45. Copper-/zinc-doped TiO2 nanopowders synthesized by microwave-assisted sol–gel method10.3390/gels9040267 ↗
46. Structural and optical characterization of Zn doped TiO2 nanoparticles prepared by sol–gel method10.1007/s10971-011-2664-8 ↗
47. Synthesis, characterization and photocatalytic applications of Zn-doped TiO2 nanoparticles by sol–gel method10.1007/s13204-015-0513-8 ↗
48. A facile synthesis of Zn-doped TiO2 nanostructures for enhanced photocatalytic performance10.1007/s10854-022-07945-z ↗
49. Diffuse reflectance spectroscopy: A comparison of the theories10.1364/AO.14.001380 ↗
50. Optical properties and electronic structure of amorphous germanium10.1002/pssb.19660150224 ↗
51. Synthesis and analysing the structural, optical, morphological, photocatalytic and magnetic properties of TiO2 and doped (Ni and Cu) TiO2 nanoparticles by sol–gel technique10.1007/s00339-019-2581-1 ↗
52. Ferromagnetism in Cr-, Fe-, and Ni-doped TiO2 samples10.1016/j.jmmm.2017.06.108 ↗
53. Zn-doped TiO2 nanoparticles for glutamate sensors10.1016/j.ceramint.2021.04.113 ↗
54. Physical properties of Zn doped TiO2 thin films with spray pyrolysis technique and its effects in antibacterial activity10.1016/j.saa.2014.11.016 ↗
55. Structural, morphological, optical and electrical properties of spray deposited zinc doped copper oxide thin films10.1007/s10854-017-7075-3 ↗
56. Determination of optical parameters of a-(As2Se3)90Ge10 thin film10.1088/0022-3727/40/7/038 ↗
57. Review of photoluminescence performance of nano-sized semiconductor materials and its relationships with photocatalytic activity10.1016/j.solmat.2005.11.007 ↗
58. Influence of boron doping on the structural, spectral, optical and morphological properties of TiO2 nanoparticles synthesized by sol–gel technique for DSSC applications10.1016/j.matpr.2020.02.738 ↗
59. Optical parameters induced by phase transformation in RF magnetron sputtered TiO2 nanostructured thin films10.1016/j.pnsc.2014.05.010 ↗
60. Defective, TiO2 with oxygen vacancies: synthesis, properties and photocatalytic applications10.1039/c3nr00476g ↗
61. The doping mechanism of Cr into TiO2 and its influence on the photocatalytic performance10.1039/c3cp53531b ↗