Analysis of strength characteristics and microstructure of alkali-activated slag cement fluidized solidified soil
Source abstract
Abstract
Abstract In order to solve such as difficulties in backfilling narrow foundation trenches in engineering, it was proposed to use alkali-activated slag cement (AASC) instead of traditional Portland cement to solidify silt and form AASC fluidized solidified soil. The effect of the content of AASC and the curing period on fluidized solidified soil has been studied by unconfined compression strength test, SEM and EDS. Moreover, the root cause for the improvement of the strength by the microstructure was explored. The results showed that: The fluidity increased first and then decreased with the increase of the content of AASC; 40% was the optimal content; in the same curing period, the unconfined compression strength increased with the increase of the content; 40% was the optimal content; the soil with different contents could reach the most of the 28d strength on Day 7; AASC generated a lot of low-Ca/Si C-S-H gel that consolidated soil particles into a denser structure. These results provide a theoretical basis for the application of AASC in fluidized solidified soil engineering.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Microbial Applications in Construction Materials · Grouting, Rheology, and Soil Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Using alkali-activated natur al aluminosilicate miner als to produce compressed masonry construction materials10.1016/j.conbuildmat.2015.07.144 ↗
2. Utilisation perspective on water quenched and air-cooled blast furnace slags10.1016/j.jclepro.2020.121354 ↗
3. Properties of two model soils stabilized with different blends and contents of CCBS, MgO, lime, and PC10.1061/(ASCE)MT.1943-5533.0000806 ↗
4. Utilization and efficiency of ground granulated blast furnace slag on concrete properties-A review10.1016/j.conbuildmat.2015.12.153 ↗
5. Comparative life cycle assessment of conventional, glass powder, and alkali-activated slag concrete and mortar10.1061/(ASCE)IS.1943-555X.0000211 ↗
6. A state-of-the-art review on the setting behaviours of ground granulated blast furnace slag-and metakaolin-based alkali-activated materials10.1016/j.conbuildmat.2023.130389 ↗
7. Characterisation of alkali-activated stainless steel slag and blast-furnace slag cements10.1016/j.cemconcomp.2023.105230 ↗
8. Wind erosion control using alkali-activated slag cement: experimental investigation and microstructural analysis10.1016/j.jenvman.2023.118633 ↗
9. Properties of alkali-activated slag cement activated by weakly alkaline activator10.3390/ma16103871 ↗
10. Characterizing the generation and environmental impacts of subway-related excavated soil and rock in China10.1016/j.jclepro.2019.119242 ↗
11. Current research and prospect of low strength flowable filling materials
12. Compressive strength and microstructure of soft clay soil stabilized with recycled bassanite10.1016/j.clay.2014.11.031 ↗
13. Influence of composition of curing agent and sand ratio of engineering excavated soil on mechanical properties of fluidized solidified soil10.2478/msp-2023-0007 ↗
14. Research progress and application on engineering characteristics of ready-mixed fluid solidified soil
15. Su · 2023
16. Influence of calcium carbide slag-desulfurization ash on basic properties and microscopic characteristics of fluid solidified soil
17. Experimental study on properties of red mud, steel slag powder and cement solidified fluidized soil
18. National Standards of the People’s Republic of China · 2017
19. Research on the preparation and properties of GBFS-based mud solidification materials10.1016/j.conbuildmat.2024.135900 ↗
20. Group standard of Beijing geotechnical engineering association · 2019
21. Mechanical characteristics and mechanism analysis of geopolymer solidified soft clay
22. The effect of polypropylene glycol content on the properties and hydration process of alkali activated slag cement mortar
23. Microbially/CO2-derived CaCO3 cement and its microstructural and mechanical performance10.1080/21650373.2023.2178539 ↗
24. Sodium silicate-based, alkali-activated slag mortars: part I. Strength, hydration and microstructure10.1016/S0008-8846(02)00717-2 ↗
25. 29 Si and 27 Al NMR study of alkali-activated slag10.1016/S0008-8846(02)01044-X ↗
26. Investigation on hydration behavior and microscopic pore structure of early-age cement-based grouting material10.1016/j.jobe.2023.108050 ↗
27. Characteristics of hydration products of alkali slag cementitious materials
28. Tong · 2020
29. Study on the water transformation law of cement-slag-fly ash cured sludge and its curing mechanism
30. Alkali-activation of agro-industrial waste for stabilization of lateritic soils10.1016/j.trgeo.2024.101187 ↗
31. Experimental feasibility study of using eco- and user-friendly mechanochemically activated slag/fly ash geopolymer for soil stabilization10.1016/j.clema.2024.100226 ↗
32. Early mechanical strength, hydration mechanism and leaching behavior of alkali-activated slag/fly ash paste filling materials10.1016/j.jobe.2024.108481 ↗
33. Effect of organic phosphonate types on performance of alkali-activated slag-based materials and its mechanism10.1016/j.cemconcomp.2024.105597 ↗
34. Raw earth stabilised by alkaline activation of slag: effect of clay on slag hydration10.1016/j.mtla.2024.102143 ↗
35. Durability properties of sustainable alkali-activated cementitious materials as marine engineering material: a review10.1016/j.mtsust.2021.100099 ↗