journal article·2024-11-01Open access

Fluidized solidified soil using construction slurry improved by fly ash and slag: preparation, mechanical property, and microstructure

Tianhong Feng, Kaihao Lin, De Zhang, Yanfei Yu, Yiming Jiang, Ping Jiang, Na Li, Wei Wang

Materials Research Express· Volume 11· Issue 11

Abstract

Abstract Fluidized solidified soil (FSS) is a cement-based engineering matergood working performance and mechanical properties. Based on fixed cement and desulphurisation gypsum (DG), fly ash (FA) and ground granulated blast furnace slag (GGBS) were added as admixtures to the construction slurry to prepare three types of FSS: namely cement-GGBS-DG FSS (CGD-FSS), cement-FA-GGBS-DG FSS (CFGD-FSS), and cement-FA-DG FSS (CFD-FSS). Considering 7 d, 14 d, and 28 d three curing times, compressive, flexural, scanning electron microscopy (SEM), and x-ray diffraction (XRD) analyses were conducted to explore the time-dependent mechanical properties and microscopic characterisation of FSS. The mechanical test showed that CFGD-FSS doped with FA and GGBS had better fluidity, compressive strength, and flexural strength than CGD-FSS doped with FA alone and CFD-FSS doped with GGBS. The CFGD-FSS specimen with a cement:FA:GGBS:DG ratio of 30: 10: 40: 20 in the curing agent had the best mechanical properties, i.e., the CFGD01 specimens. It has fluidity of 189 mm, compressive strength of 671 kPa, and flexural strength of 221 kPa with a 28d curing time, which can meet the working requirements of FSS for filling narrow engineering spaces. And compared with other specimens, it has the shortest setting time, which can effectively shorten the construction period. Microscopic analysis showed that a large number of hydration products, such as calcium silicate hydrate, calcium aluminate hydrate, and ettringite (Aft), were well-formed in the FSS, resulting in good mechanical properties, especially for the CFGD-01 specimens. Finally, two empirical models were established to describe the compressive strength–porosity and flexural strength–porosity relationships. Moreover, the investigated data agreed well with the modelling results.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Geotechnical and Geomechanical Engineering · Humic Substances and Bio-Organic Studies · Landfill Environmental Impact Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Tunnel spoil classification and applicability of lime addition in weak formations for muck reuse10.1016/j.tust.2014.07.013 ↗
2. Experimental study on material ratio and strength performance of geopolymer-improved soil10.1016/j.conbuildmat.2020.120469 ↗
3. Experimental investigation on properties of gypsum-quicklime-soil grout material in the reparation of earthen site cracks10.1016/j.conbuildmat.2017.08.180 ↗
4. Study on mechanical properties and microstructure of metakaolin-slag-calcium carbide residue synergistic solidifying waste engineering mud10.1016/j.conbuildmat.2024.137135 ↗
5. A study on the effect of the salt content on the solidification of sulfate saline soil solidified with an alkali-activated geopolymer10.1016/j.conbuildmat.2018.05.013 ↗
6. Laboratory study of the effects of using magnesium slag on the geotechnical properties of cement stabilized soil10.1016/j.conbuildmat.2019.07.011 ↗
7. Waste glass in the geopolymer preparation. Mechanical and microstructural characterisation10.1016/j.jclepro.2014.11.074 ↗
8. Production and resource utilization of flue gas desulfurized gypsum in China - a review10.1016/j.envpol.2021.117799 ↗
9. Enhancement of ultra-fine slag on compressive strength of solid waste-based cementitious materials: towards low carbon emissions10.1016/j.jobe.2022.105475 ↗
10. Resource utilization of solid waste for the collaborative reduction of pollution and carbon emissions: case study of fly ash10.1016/j.jclepro.2022.135449 ↗
11. Research on the preparation and properties of GBFS-based mud solidification materials10.1016/j.conbuildmat.2024.135900 ↗
12. Effect of silica fume on engineering properties of expansive soil10.1016/j.matpr.2020.02.839 ↗
13. Mechanical properties of clays stabilized with glass powder and silica fume10.1007/s40891-023-00463-w ↗
14. Engineering properties and optimal design of foam lightweight soil composite fly ash: an eco-friendly subgrade material10.1016/j.jclepro.2023.139631 ↗
15. Preparation of reactive powder concrete using fly ash and steel slag powder10.1007/s11595-010-2349-0 ↗
16. Damage evolution, brittleness and solidification mechanism of cement soil and alkali-activated slag soil10.1016/j.jmrt.2023.07.087 ↗
18. Comparative experimental study on strength properties of red clay modified by cement and industrial solid waste powder10.1155/2023/6645563 ↗
19. Solid waste-based dry-mix mortar using fly ash, carbide slag, and flue gas desulfurization gypsum10.1016/j.jmrt.2022.10.157 ↗
20. Strength development mechanism of a marine binding material with red mud and seawater10.1016/j.conbuildmat.2021.124428 ↗
21. Properties and microstructure of soil solidified by titanium slag-flue gas desulfurized gypsum-Portland cement composites as solidifiers10.1016/j.conbuildmat.2024.137061 ↗
22. Mechanical, microstructural, and durability properties of soil stabilized with alkali-activated jarofix for road applications10.1061/JHTRBP.HZENG-1236 ↗
23. Evaluation of engineering properties and environmental effect of recycled gypsum stabilized soil in geotechnical engineering: a comprehensive review10.1016/j.resconrec.2021.105780 ↗
24. Mechanical properties and micro-mechanisms of marine soft soil stabilized by different calcium content precursors based geopolymers10.1016/j.conbuildmat.2021.124722 ↗
25. Mechanical properties of solidified dredged soils considering the effects of compaction degree and residual moisture content10.1016/j.dibe.2023.100235 ↗
26. Experimental study of moisture content effect on geotechnical properties of solidified municipal sludge10.1155/2020/8794076 ↗
27. Sustainable stabilization/solidification of arsenic-containing soil by blast slag and cement blends10.1016/j.chemosphere.2021.129868 ↗
28. Preparation and characterization of premixed fluidized solidified soil with municipal solid waste incineration bottom ash10.1016/j.conbuildmat.2024.137541 ↗
29. Analysis of strength characteristics and microstructure of alkali-activated slag cement fluidized solidified soil10.1088/2053-1591/ad64b1 ↗
30. Strength and durability of fly ash, GGBS and cement clinker stabilized dispersive soil10.1016/j.coldregions.2021.103358 ↗
31. Water resistant blended cements containing flue-gas desulfurization gypsum, Portland cement and fly ash for structural applications10.1016/j.cemconcomp.2019.04.033 ↗
32. Mechanical properties and microscopic characterization of mortar with recycled aggregate from waste road10.1016/j.cscm.2022.e01441 ↗
33. Pore structure characterization and permeability prediction of coal specimens based on SEM images10.1016/j.jngse.2019.05.003 ↗
34. A new method for threshold determination of gray image10.1007/s40948-020-00198-2 ↗
35. Strength and freeze-thaw cycle resistance of cement stabilized coastal clay mixed with shell powder10.1088/2053-1591/acdce2 ↗
36. Microstructure of coastal soil modified with cement and nano-clay soil under freeze-thaw cycles
37. Experimental investigations on the mechanical and microscopic behavior of cement-treated clay modified by nano-mgo and fibers10.1061/(ASCE)GM.1943-5622.0002376 ↗
38. Effect of spatial variation of strength and modulus on the lateral compression response of cement-admixed clay slab10.1680/jgeot.14.P.254 ↗
39. Study on the workability, mechanical property and water absorption of reactive powder concrete10.1016/j.cscm.2022.e01777 ↗
40. Influence of particle morphology of ground fly ash on the fluidity and strength of cement paste10.3390/ma14020283 ↗
41. Ternary cementless composite based on red mud, ultra-fine fly ash, and GGBS: synergistic utilization and geopolymerization mechanism10.1016/j.cscm.2023.e02410 ↗
42. Properties of concrete mixtures containing slag cement and fly ash for use in transportation structures10.1016/j.conbuildmat.2007.07.004 ↗
43. Promotion of hydrophobic-hydrophilic separation of coal gasification fine slag through ultrasonic pre-treatment10.1016/j.jece.2023.110653 ↗
44. Hydrophobic high surface area zeolites derived from fly ash for oil spill remediation10.1021/es3048174 ↗
45. Utilization of excavated soil in coal ash-based controlled low strength material (CLSM)10.1016/j.conbuildmat.2016.07.053 ↗
46. Influence of stress history, strain rate and end effects on undrained shear behaviour and strain localization of laterite soil10.1080/19386362.2020.1776019 ↗
47. Strength properties of nano-MgO and cement stabilized coastal silty clay subjected to sulfuric acid attack10.1080/1064119X.2019.1656313 ↗
48. Mechanical properties and microscopic mechanism of cement-stabilized calcareous sand improved with a nano-MgO additive10.1061/(ASCE)GM.1943-5622.0002644 ↗
49. Ground granulated blast furnace slag amended fly ash as an expansive soil stabilizer10.1016/j.sandf.2016.02.004 ↗
50. Characterization and performance of high volume recycled waste glass and ground granulated blast furnace slag or fly ash blended mortars10.1016/j.jclepro.2019.06.334 ↗
51. Study on the mechanism of Ca2+ and Na+ interaction during the hydration of multi-source solid waste geopolymers10.1016/j.jobe.2023.106177 ↗
52. Study on the synergistic effect of calcium carbide residue -fly ash enhanced desulphurisation gypsum under high temperature maintenance condition10.1016/j.conbuildmat.2023.134706 ↗
53. Shrinkage of self-compacting concrete made with blast furnace slag as fine aggregate10.1016/j.conbuildmat.2014.11.029 ↗
54. Investigation of the kenaf fiber hybrid length on the properties of the cement-treated sandy soil10.1016/j.trgeo.2019.100301 ↗
55. Strength and durability characteristics of coconut fibre reinforced earth cement blocks10.1080/15440478.2019.1652220 ↗
56. Characterization of short-term strength properties of fiber/cement-modified slurry10.1155/2019/3789403 ↗
57. Mechanical characteristics and solidification mechanism of slag/fly ash-based geopolymer and cement solidified organic clay: a comparative study10.1016/j.jobe.2023.106459 ↗
58. Effect of organic alkali on hydration of GGBS-FA blended cementitious material activated by sodium carbonate10.1016/j.ceramint.2021.09.240 ↗
59. Hydration, shrinkage, pore structure and fractal dimension of silica fume modified low heat Portland cement-based materials10.1016/j.conbuildmat.2020.121952 ↗
60. Investigation on performance improvement of dredged sediment with high water content stabilized with alkali-activated materials10.1007/s11368-023-03680-y ↗
61. Mechanical properties and micro mechanism of nano-SiO2 modified coastal cement soil at short age10.1007/s10114-023-0667-3 ↗
62. Effects of cement content and soil texture on strength, hydraulic, and microstructural characteristics of cement-stabilized composite soils10.1007/s10064-022-02734-8 ↗