journal article·2022-01-01Open access

Mechanical properties and constitutive model of Sn-58Bi alloy

Kebin Zhang, Wenbin Li, Ping Song, Changfang Zhao, Kewen Zhang

Materials Research Express· Volume 9· Issue 1

Abstract

Abstract Sn-58Bi alloy is a strain-rate-sensitive material. To study the mechanical properties of Sn-58Bi alloy, an MTS universal testing machine and split-Hopkinson pressure bar were used to conduct quasi-static and dynamic testing on Sn-58Bi alloy, obtaining the stress-strain curve of Sn-58Bi alloy at the strain rate of 0.001–6316 s−1. By comparing the tensile and compressive stress–strain curves of Sn-58Bi alloy under quasi-static conditions, it is found that Sn-58Bi alloy is brittle, with its tensile yield strength lower than its compressive yield strength. By comparing the compressive stress–strain curves of Sn-58Bi alloy at different strain rates, it is found that the yield strength of Sn-58Bi alloy increases with increasing strain rate, and a strain-hardening phenomenon is manifested at high strain rate. By revising the Johnson–Cook constitutive model, the constitutive model of Sn-58Bi alloy at different strain rates was established, with the calculated results of the model in good agreement with the experimental results.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Pb-free external lead finishes for electronic components
2. Effect of strain rate on interfacial fracture behaviors of Sn-58Bi/Cu solder joints10.1007/s10854-013-1548-9 ↗
3. Li · 2017
4. Significantly improved mechanical properties of Bi- Sn solder alloys by Ag- doping10.1007/s11664-997-0281-7 ↗
5. Thermal and mechanical properties of Sn–Zn–Bi lead-free solder alloys10.1016/j.jallcom.2009.04.108 ↗
6. Microstucture and mechanical properties of semi-solid Sn–58Bi alloy10.4028/www.scientific.net/KEM.480-481.687 ↗
7. Microstructure and mechanical properties of Sn-Bi alloy treated in the semi-solid state by mechanical stirring process10.4028/www.scientific.net/AMR.150-151.1768 ↗
8. Improvement of mechanical properties of Sn-58Bi alloy with multi-walled carbon nanotubes10.1016/S1003-6326(12)61788-9 ↗
9. Improvement of microstructure and mechanical properties of Sn-58Bi alloy with La2O3
10. Microstructure and mechanical properties of Sn– x Bi solder alloy10.1007/s10854-015-2880-z ↗
11. Tensile properties of Sn-Bi lead-free solder alloys10.4028/www.scientific.net/SSP.273.72 ↗
12. Mechanical deformation behavior and mechanism of Sn-58Bi solder alloys under different temperatures and strain rates10.1016/j.msea.2016.03.072 ↗
13. Properties and microstructures of Sn-Bi-X lead-free solders10.1155/2016/9265195 ↗
14. Strain rate sensitivity of mixed SAC-SnBi solder joints
15. A constitutive model and data for materials subjected to large strains, high strain rates, and high temperatures
16. Optimum size of specimens in dynamic mechanical properties test of transversely isotropic materials
17. Wang · 2013
18. The constitutive behavior of Ti–5Al–3V–2Cr–2Fe under high-velocity impact: experimental, modeling, and validation10.1016/j.jallcom.2019.151946 ↗
19. Compressive mechanical properties of polyethylene at different strain rates
20. Study on mechanical properties and constitutive model of 5052 aluminium alloy10.1080/02670836.2019.1596611 ↗
21. A tension split Hopkinson bar for investigating the dynamic behavior of sheet metals10.1007/BF02411046 ↗
22. Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers: characterization and modeling of the compressive yield stress10.1016/j.ijsolstr.2005.06.040 ↗