Compression and energy absorption properties of the truss-like lightweight materials based on symmetric groups
Source abstract
Abstract
Abstract Truss-like lightweight materials (TLMs) have been widely used in aeronautics and astronautics, because of excellent mechanical property and superior energy absorption capability. The design of TLMs’ meso-structures was a critical task to improve its performance. Hence, a structure design method based on the symmetric groups was proposed for TLMs, and a novel hexagonal prism TLM’s meso-structure was deduced by the symmetric and translational operations of the space group P6mm. To investigate the performance of the novel TLM, the mechanical analysis model was established. The predictive equations of compression performance was proposed based on Euler–Bernoulli beam theory. The stress distribution of the novel TLM’s meso-structure under compression load was discussed by the finite element analysis method, and its compression and energy absorption properties were investigated. The simulation results were in agreement with the predictive results. In addition, the common FCC and BCC TLMs were discussed using the symmetry group analysis method, and their compression properties were predicted. The results showed that the proposed novel TLM in this study had better compression property than BCC and FCC TLMs at the same relative density.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Structural Analysis and Optimization · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Additively-manufactured metallic micro-lattice materials for high specific energy absorption under static and dynamic loading10.1016/j.actamat.2016.05.054 ↗
2. Lattice structure design optimization coupling anisotropy and constraints of additive manufacturing10.1016/j.matdes.2020.109089 ↗
3. A review of recent research on bio-inspired structures and materials for energy absorption applications10.1016/j.compositesb.2019.107496 ↗
4. SLM lattice structures: properties, performance, applications and challenges10.1016/j.matdes.2019.108137 ↗
5. A review on integration of lightweight gradient lattice structures in additive manufacturing parts10.1177/1687814020916951 ↗
6. Structurally controlled cellular architectures for high-performance ultra-lightweight materials10.1002/adma.201803670 ↗
7. Mechanical performance of additively manufactured meta-biomaterials10.1016/j.actbio.2018.12.038 ↗
8. Large deformation response of additively-manufactured FCC metamaterials: From octet truss lattices towards continuous shell mesostructures10.1016/j.ijplas.2017.02.003 ↗
9. A state-of-the-art review on types, design, optimization, and additive manufacturing of cellular structures Int J Adv Manuf10.1016/j.eml.2018.07.001 ↗
10. Mechanical responses of titanium 3D kagome lattice structure manufactured by selective laser melting10.1016/j.eml.2018.07.001 ↗
11. Single-parameter mechanical design of a 3D-printed octet truss topological scaffold to match natural cancellous bones10.1016/j.matdes.2021.109986 ↗
12. Compressive behavior and energy absorption of polymeric lattice structures made by additive manufacturing10.1007/s11465-019-0549-7 ↗
13. Design and additive manufacturing of a modified face-centered cubic lattice with enhanced energy absorption capability10.1016/j.eml.2021.101358 ↗
14. Mechanical design and modelling of lightweight additively manufactured lattice structures evolved from regular three-dimensional tessellations10.1177/0954406219885959 ↗
15. Mechanical performance of additively-manufactured anisotropic and isotropic smooth shell-lattice materials: simulations & experiments10.1016/j.jmps.2018.08.022 ↗
16. Fabrication of polymeric lattice structures for optimum energy absorption using Multi Jet Fusion technology10.1016/j.matdes.2018.05.059 ↗
17. Compressive properties of Al-Si alloy lattice structures with three different unit cells fabricated via laser powder bed fusion10.3390/ma13132902 ↗
18. Evaluation of topology-optimized lattice structures manufactured via selective laser melting10.1016/j.matdes.2018.01.023 ↗
19. Failure and energy absorption characteristics of four lattice structures under dynamic loading10.1016/j.matdes.2019.107655 ↗
20. Configuration optimization design of Ti6Al4V lattice structure formed by SLM10.3390/ma11101856 ↗
21. Optimisation of three-dimensional hierarchical structures with tailored lattice metamaterial anisotropy10.1016/j.matdes.2021.110083 ↗
22. Stiffness and energy absorption of additive manufactured hybrid lattice structures10.1080/17452759.2021.1954405 ↗
23. Compressive and energy absorption properties of pyramidal lattice structures by various preparation methods10.3390/ma14216484 ↗
24. Mechanical properties and energy absorption capability of ARCH lattice structures manufactured by selective laser melting10.1002/adem.201901534 ↗
25. Study on the quasistatic compression performance of arch microstrut lattice structure by selective laser melting10.1002/adem.202101156 ↗
26. Buckling optimization of Kagome lattice cores with free-form trusses10.1016/j.matdes.2018.02.026 ↗
27. Mechanical properties and energy absorption capability of functionally graded F2BCC lattice fabricated by SLM10.1016/j.matdes.2018.01.059 ↗
28. Characterisation and modeling of additively-manufactured polymeric hybrid lattice structures for energy absorption10.1016/j.ijmecsci.2020.106101 ↗
29. Compressive performance and energy absorption of additively manufactured metallic hybrid lattice structures10.1016/j.ijmecsci.2022.107093 ↗
30. Group theory analysis of braided geometry structures10.1007/BF03183644 ↗
31. Meso-structure and processing of three-dimensional braided material based on space group symmetry10.1177/0040517516659376 ↗
32. 3D angle-interlock woven fabric based on plain group P4mm symmetry10.1016/j.compstruct.2019.111539 ↗