journal article·2023-02-01Open access

Experimental investigations of influence on grain size and cold deformational behavior of AL6063 during the microforming process

A Karthikeyan, D Rajenthirakumar

Materials Research Express· Volume 10· Issue 2

Abstract

Abstract Miniature products are requisite to make micro creation widely in electronics and micromechanical products. The microfabrication process is identified to satisfy the production of such miniature products rather than an ordinary manufacturing process. Microextrusion is one of the microforming processes in micromanufacturing. In this present work, an attempt has been made to investigate the influence of grain size and deformation behavior of Al6063 microstepped pin with annealed billets for the cold extrusion process. The methodology on the characterization of the microextrusion of Al6063 includes, annealing of the billet, extrusion testing, microhardness examination and surface roughness analysis. The billet with three different sizes of grains is extruded. The experimental result shows that the deformation load and average microhardness of the AA96 (annealed Al6063 with an obtained grain size of 96 μ m) are high compared to AA208 (annealed Al6063 with an obtained grain size of 208 μ m). The surface finish has improved using diamond-like carbon (DLC) coated die compared to uncoated and lubricated dies. DLC coating with AA208 billet achieved a maximum pin length of 13.1 mm, and uncoated die with AA96 billet achieved a minimum pin length of 5.5 mm. Thus, the findings of this study contribute to the fundamental understanding of cold microextrusion of aluminium 6063 alloy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metal and Thin Film Mechanics · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Influence of grain size on deformational behavior in microextrusion process10.1007/s40430-019-1642-x ↗
2. Development of micropin fabrication process using tool based micromachining10.1007/s00170-004-2270-9 ↗
3. Micro-hole fabrication by mechanical punching process10.1016/j.jmatprotec.2005.06.038 ↗
4. Study on vibration-EDM and mass punching of micro-holes10.1016/j.jmatprotec.2006.03.238 ↗
5. Experimental investigations of grain size effects in forward microextrusion10.1007/s00170-015-7497-0 ↗
6. A review on micro-manufacturing, micro-forming and their key issues10.1016/j.proeng.2013.02.086 ↗
7. Influence of temperature on deformation behavior of copper during microextrusion process10.1177/0954406219899114 ↗
8. Micro-manufacturing engineering and technology
9. Geiger · Microforming. CIRP Ann - Manuf Technol · 2001 · 50 · 44510.1016/S0007-8506(07)62991-6 ↗
10. Size effects in manufacturing of metallic components10.1016/j.cirp.2009.09.002 ↗
11. On the size effects in micro/meso semisolid extrusion-forging of A356 aluminum alloy10.1007/s00170-014-5912-6 ↗
12. Combined influence of size effect and temperature in microscale deformation of 6063 aluminum gear
13. Study on the size effect and the effect of the friction coefficient on the micro-extrusion process10.1007/978-3-540-73417-8_58 ↗
14. Categories of size effects10.1007/s11740-008-0127-z ↗
15. Microforming: experimental investigation of the extrusion process for micropins and its numerical simulation using RKEM10.1115/1.1813468 ↗
16. Experimental Investigations of Material Behaviour in Forward Micro Extrusion10.4028/www.scientific.net/AMM.813-814.536 ↗
17. Effect of the microstructure on the mechanical properties and surface finish of an extruded Al-6063 aluminum alloy
18. FE simulation of micro-extrusion of a conical pin10.1007/s12289-010-0797-x ↗
19. Influences of temperature and grain size on the material deformability in microforming process10.1007/s12289-016-1317-4 ↗
20. Adeosun · Extrusion Characteristics Dependence of Wrought Aluminium Alloy on Extrusion Variables. · 2013 · 3 · 77
21. Cold extrusion
22. Micro-scaled plastic deformation behavior of biodegradable AZ80 magnesium alloy: experimental and numerical investigation10.1007/s00170-019-03440-8 ↗
23. Fine extrusion device approach10.1007/s00170-015-8277-6 ↗
24. Standard test method for microindentation hardness of materials10.1520/E0384-17 ↗
25. Numerical simulations of the hall-petch relationship in aluminium using gradient-enhanced plasticity model10.1155/2019/7356581 ↗
26. Effect of specimen size and grain size on deformation in microextrusion10.1016/j.jmapro.2011.05.002 ↗