An environmentally friendly and high current efficiency acid mist inhibitor for zinc electrowinning
Source abstract
Abstract
Abstract Acid mist inhibitor is an effective additive for suppressing the generation of acid mist during electrowinning process. However, the traditional acid mist inhibitor has a low current efficiency, leading to high energy consumption. Thus, novel acid mist inhibitors are crucial for the development of the electrowinning industry. In this paper, three new acid mist inhibitors (Famigo® FS-101, Famigo® FS-301, and Famigo® FS-401) are used in zinc electrowinning process, while the mechanism of action in suppressing the generation of acid mist is characterized by the volume of bubble attached on the cathode surface and surface tension. The impacts of the concentration of the acid mist inhibitors on the bath voltage, current efficiency, power consumption, and electrochemical properties, as well as the enhancement mechanism on the current efficiency, are studied. The obtained results demonstrate that an adequate concentration of Famigo®FS-101, Famigo®FS-301, and Famigo®FS-401 allows to increase the cathode current efficiency and decrease the energy consumption, from 3219 kWh t−1 in zinc electrolyzer to 2948 kWh t−1, 3090 kWh t−1, and 2884 kWh t−1 using a concentration of 5 mg l−1 of Famigo®FS-101, Famigo®FS-301, and Famigo®FS-401, respectively. The proposed inhibitors have high acid mist inhibition efficiency and current efficiency in the zinc electrowinning process. Furthermore, if engineered, they may contribute to the development of the electroposition industry.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced battery technologies research · Advanced Battery Technologies Research · Molten salt chemistry and electrochemical processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Production flux of sea spray aerosol
2. Minimum size for the top jet drop from a bursting bubble10.1103/PhysRevFluids.3.074001 ↗
3. Jet formation in bubbles bursting at a free surface10.1063/1.1494072 ↗
4. On the physics of fizziness: how bubble bursting controls droplets ejection10.1063/1.4902820 ↗
5. Application of standardized proportional mortality ratio to the assessment of health risk in relatively healthy populations: using a study of cancer risk in telecommunication workers with excess exposure to acid mists as an example10.3390/ijerph18189870 ↗
6. A putative adverse outcome pathway relevant to carcinogenicity induced by sulfuric acid in strong inorganic acid mists10.15430/JCP.2019.24.3.139 ↗
7. Acid mist and bubble size correlation in copper electrowinning10.1016/j.hydromet.2011.11.014 ↗
8. Reduction of acid mist emission in formation process of Automotive lead acid battery manufacturing industry by means of an electrolyte additive10.1016/j.matpr.2021.03.251 ↗
9. Application of acoustic agglomeration for removing sulfuric acid mist from air stream10.1016/j.serj.2017.09.002 ↗
10. Formation and removal characteristics of sulfuric acid mist in a wet flue gas desulfurization system
11. Sulphuric acid plant optimization and troubleshooting10.17159/2411-9717/2017/v117n11a7 ↗
12. Stacking polymer microspheres matrix: a facile, practical, and energy-saving strategy for suppression of acid mist10.1080/09593330.2022.2039964 ↗
13. Bubble characteristics and aerosol formation in electrowinning cells10.1007/BF01059300 ↗
14. The use of organic additives to suppress acid mist in copper electrowinning10.1179/cmq.2004.43.4.449 ↗
15. Foaming behavior of surfactants for acid mist control in zinc electrolysis processes10.1016/S0304-386X(03)00002-1 ↗
16. Standard test method for foaming properties of surface-active agents
17. Foamability/stability of surfactants10.1515/tsd-1992-290105 ↗
18. A new method to estimate the stability of short-life foams10.1016/0927-7757(95)03101-I ↗
19. Foaming, foam films, antifoaming and defoaming10.1016/0001-8686(95)00280-4 ↗
20. Increased current efficiency of zinc electrowinning in the presence of metal impurities by addition of organic inhibitors10.1016/S0304-386X(03)00129-4 ↗
21. The effects of Dowfroth, antimony and Saponin on zinc electrowinning from Kidd Creek electrolyte10.1007/BF01052573 ↗
22. Evaluation of saponins as acid mist suppressants in zinc electrowinning10.1016/j.hydromet.2003.10.001 ↗
23. Dhak · An Investigation on the Effects of Organic Additives on Zinc Electrowinning from Industrial Electrolyte EMMP 8. · 2010 · 28 · 267
24. The effects of mixtures of acid mist suppression reagents on zinc electrowinning from spent electrolyte solutions10.1016/j.hydromet.2011.02.002 ↗
25. Role of organic reagents and impurity in zinc electrowinning10.1016/j.hydromet.2015.01.003 ↗
26. Anodic behavior and microstructure of Al/Pb−Ag anode during zinc electrowinning10.1016/S1003-6326(14)63140-X ↗
27. Electrochemical studies of the performance of different Pb−Ag anodes during and after zinc electrowinning10.1016/j.hydromet.2010.05.007 ↗
28. The sizing of oxygen bubbles in copper electrowinning10.1016/j.hydromet.2011.06.010 ↗
29. I. Formation and rise of a bubble stream in a viscous liquid10.1007/s100510050392 ↗
30. Effect of surfactant type on microbubble formation behavior using Shirasu porous glass (SPG) membranes10.1016/j.colsurfa.2008.05.025 ↗
31. Diffusion coefficient and nucleation density studies on electrochemical deposition of aluminum from chloroaluminate ionic liquid electrolytes
32. Nucleation and diffusion-controlled growth of electroactive centers: Reduction of protons during cobalt electrodeposition10.1016/j.electacta.2005.03.004 ↗
33. Competitive electrochemical oxidation of p-chlorophenol and p-nitrophenol on Bi-doped PbO210.1016/S0013-4686(03)00411-0 ↗
34. Zinc Electrowinning From Acidic Sulphate solutions IV: effects of perfluorocarboxylic acids10.1016/j.jelechem.2003.09.030 ↗
35. An investigation on the effects of orthophenylene diamine and sodium lignin sulfonate on zinc electrowinning from industrial electrolyte10.1016/S0304-386X(03)00030-6 ↗