Development of an Al-Zn-Bi alloy sacrificial anode for the protection of steel in artificial seawater: an electrochemical analysis
Source abstract
Abstract
Abstract The Al-Zn sacrificial anodes are widely used for cathodic protection in marine steel structures. This study evaluates the impact of bismuth addition on the electrochemical properties of the Al-Zn sacrificial anode in artificial seawater. The microstructure analysis confirms the presence of uniformly distributed intermetallic β -AlFeSi and spherical Bi within the α -Al matrix. The open circuit potential (OCP) comparison between Al-Zn-Bi and carbon steel reveals a potential difference of approximately 400 mV, indicating sufficient cathodic protection for the steel. Electrochemical impedance measurements indicate the initial hindered dissolution of the anode due to surface film formation, which later dissociates due to the aggressive attack of Cl − species in the electrolyte. The sufficiently negative surface potential (−0.875 V vs. Ag/AgCl ) observed at 10 mA cm −2 demonstrates the suitability of anode for fulfilling the cathodic protection criteria of steel structures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Influence of sea mud state on the anodic behavior of Al-Zn-In-Mg-Ti sacrificial anode10.1016/j.oceaneng.2017.03.009 ↗
2. Corrosion protection of steel members using an Al-Zn base sacrificial anode and fiber sheet in an atmospheric environment10.1016/j.conbuildmat.2019.07.067 ↗
3. Effect of silicon on corrosion behaviour of Al-Zn as a low voltage sacrificial anode for marine environment10.1088/1757-899X/547/1/012056 ↗
4. Challenges and solutions of cathodic protection for marine ships10.1016/j.corcom.2021.08.003 ↗
5. Cathodic protection technology for protection of naval structures against corrosion10.1007/s40010-014-0182-0 ↗
6. Long-term performance and life-cycle-cost benefits of cathodic protection of concrete structures using galvanic anodes10.1016/j.jobe.2021.102467 ↗
7. The selection and use of cathodic protection systems for the repair of reinforced concrete structures10.1016/j.conbuildmat.2012.05.037 ↗
8. Corrosion analysis of Al–Zn–In–Mg–Ti–Mn sacrificial anode alloy10.1016/j.jallcom.2010.02.174 ↗
9. Performance of Al-Zn-Sn alloy anodes in sea water service
10. Theory of steady-state passive films10.1149/1.2086949 ↗
11. Anodic behavior of Al–Zn–In sacrificial anodes at different concentration of zinc and indium10.3139/146.110817 ↗
12. Optimization of manganese and magnesium contents in as-cast aluminum-zinc-indium alloy as sacrificial anode10.1016/S1005-0302(11)60143-6 ↗
13. Development of high performance aluminium alloy sacrificial anodes reinforced with metal oxides
14. Operating performance of aluminum anodes--Results from laboratory and field tests
15. Activation of aluminium anodes by the presence of intermetallic compounds10.1016/S0013-4686(96)00420-3 ↗
16. Development of high performance aluminium alloy sacrificial anodes reinforced with metal oxides10.1016/j.matlet.2006.10.062 ↗
17. Comprehensive model for the activation mechanism of Al–Zn alloys produced by indium10.1016/j.corsci.2004.05.002 ↗
18. Anodic dissolution of Al sacrificial anodes in NaCl solution containing Ce10.1016/j.corsci.2011.01.001 ↗
19. Development of Al-Zn-Cu alloy for low voltage aluminum sacrificial anode10.1016/j.proeng.2017.04.112 ↗
20. Evaluating the performance of zinc and aluminum sacrificial anodes in artificial seawater10.1016/j.electacta.2019.05.067 ↗
21. Effect of Zn/Mg ratio on cathodic protection of carbon steel using Al− Zn− Mg sacrificial anodes10.1016/S1003-6326(20)65361-4 ↗
22. Influence of Sn, Cd, and Si addition on the electrochemical performance of Al–Zn–In sacrificial anodes10.1002/maco.201911336 ↗
23. Corrosion mechanism of Al, Al–Zn and Al–Zn–Sn alloys in 3 wt% NaCl solution10.1016/j.corsci.2014.07.018 ↗
24. Influence of bismuth on electrochemical behavior of sacrificial aluminum anode10.1108/00035590610650802 ↗
25. ASM handbook
26. An initial investigation of calcareous deposits upon cathodic steel surfaces in sea water10.5006/1.3593848 ↗
27. Calcareous deposits on metal surfaces in seawater—a critical review10.5006/1.3581927 ↗
28. Influence of temperature and exposure time upon calcareous deposits10.5006/1.3583848 ↗
29. A study of calcareous deposits on cathodically protected mild steel in artificial seawater10.3390/met5010439 ↗
30. Determination of corrosion protection current density requirement of zinc sacrificial anode for corrosion protection of AA5083-H321 in seawater10.1016/j.apsusc.2020.145346 ↗
31. Cathodic protection of steel in sea water with magnesium anodes10.5006/0010-9312-4.7.358 ↗
32. Effect of calcareous deposit formation on galvanic anode cathodic protection of steel in seawater
33. Stability of passive films formed on aluminium in aqueous halide solutions10.1179/000705991798269035 ↗
34. Electrochemical study of the pitting corrosion of aluminium and its alloys—II. Study of the interaction of chloride ions with a passive film on aluminium and initiation of pitting corrosion10.1016/0013-4686(89)87119-1 ↗
35. On the mechanism of pitting of aluminum
36. Morphological studies of occluded cells in the pitting of dilute aluminum alloys in seawater10.1149/1.2123733 ↗
37. Electrochemical behaviour of aluminium alloys containing indium and tin in NaCl solution10.1016/j.matchemphys.2010.02.040 ↗
38. The influence of temperature and dissolved oxygen on the electrochemical properties of three Al-Zn-in series sacrificial anodes
39. Electrochemical behaviour of Al, Al–Sn, Al–Zn and Al–Zn–Sn alloys in chloride solutions containing stannousions10.1016/S0010-938X(00)00101-3 ↗
40. The effect of increasing the amount of indium alloying material on the efficiency of sacrificial aluminium anodes10.3390/ma14071755 ↗
41. Pitting potential of high purity binary aluminium alloys—II. AlMg and AlZn alloys10.1016/S0010-938X(77)80014-0 ↗