Experimental investigation on mechanical and microstructural properties of self-compacting geopolymer concrete with different mineral admixtures
Source abstract
Abstract
Abstract Geopolymer concrete is environmentally friendly concrete as it relies on minor treated natural materials or industrial by-products like fly ash, GGBS, silica fumes etc,. which have high alumina (Al2O3) and silica (SiO2) content, significantly reducing carbon footprints. To overcome the challenge of compaction due to the highly viscous nature of geopolymer concrete, self-compacting geopolymer concrete (SCGC) has been developed to flow and compact under its weight, eliminating the need for additional compaction. Self-compacting geopolymer concrete is an innovative concrete that combines the benefits of geopolymer concrete and self-compacting concrete. In this study, mineral admixtures of fly ash, ultra fine ground granulated blast-furnace slag (GGBS), and micro silica were used in different mix proportions. For all mixes, the water-to-powder (binder content) mass ratio (w/p) was maintained as 0.35, the total powder content was 400 kg m−3, and glass fibre 1.5% of the binder content were used. The water to powder (binder content) mass ratio (w/p) selected after numerous trial mixes was 0.35. The test specimens were cured at 70 °C. In this study, to measure fresh properties, tests on concrete slump flow test, L-box test, V-Funnel test, and T50 V- Funnel test, J-ring were conducted. This paper illustrates the way an ANN (Artificial Neural Network) model may be employed to find the mix proportion of concrete mixes. The fresh and mechanical Properties of SCGC were conducted for different molarities of eight molarities, ten molarities, and twelve molarities. Microstructural studies such as x-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FT-IR) analyses were carried out, and the results are presented.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Low-CO2 emission strategies to achieve net zero target in cement sector10.1016/j.jclepro.2023.137466 ↗
2. Projecting future carbon emissions from cement production in developing countries10.1038/s41467-023-43660-x ↗
3. Geopolymer concrete: sustainable green concrete for reduced greenhouse gas emission–a review10.1016/j.matpr.2021.11.588 ↗
4. Engineering properties, sustainability performance and life cycle assessment of high strength self-compacting geopolymer concrete composites10.1016/j.conbuildmat.2023.131613 ↗
5. Self-compacting concrete (SCC) behaviour incorporating limestone fines as cement and sand replacement10.1080/19648189.2019.1607564 ↗
6. Development of self-compacting geopolymer concrete as a sustainable construction material10.1016/j.serj.2018.08.004 ↗
7. Fly ash-based eco-friendly geopolymer concrete: a critical review of the long-term durability properties10.1016/j.conbuildmat.2020.121857 ↗
8. Performance of self-compacted geopolymer concrete containing fly ash and slag as binders10.3390/su142215063 ↗
9. Effect of fly ash blending on self-compacting geopolymers for maintaining sustainability in construction
10. Performance of self-compacting geopolymer concrete with and without GGBFS and steel fiber10.12989/acc.2018.6.4.323 ↗
11. Development of eco-friendly self-compacting concrete using fly ash and waste polyethylene terephthalate bottle fiber10.28991/CEJ-2023-09-02-014 ↗
12. A newly developed self-compacting geopolymer concrete under ambient condition10.1016/j.conbuildmat.2020.121822 ↗
13. Incorporation of wheat straw ash as partial sand replacement for production of eco-friendly concrete10.3390/ma14082078 ↗
14. Investigating the potential reactivity of fly ash for geopolymerization10.1016/j.conbuildmat.2019.07.140 ↗
15. Compressive strength of sustainable geopolymer concrete composites: a state-of-the-art review10.3390/su132413502 ↗
16. Multi-response optimization of fiber-reinforced-shaped synthetic aggregate concrete10.1007/s13369-023-08305-7 ↗
17. Fly ash and BOF slag as sustainable precursors for engineered geopolymer composite (EGC) mixes: a strength optimization study10.1007/s13369-023-08421-4 ↗
18. Memon · International Journal of Minerals, Metallurgy, and Materials · 2013 · 20 · 20510.1007/s12613-013-0714-7 ↗
19. IS 383. Specification for coarse and fine aggregates from natural sources for concrete
20. EFNARC · 2005
21. Effect of critical parameters on the fresh properties of self compacting geopolymer concrete10.1016/j.matpr.2022.02.506 ↗
22. Proposing several model techniques including ANN and M5P-tree to predict the compressive strength of geopolymer concretes incorporated with nano-silica10.1007/s11356-022-20863-1 ↗
23. Development of ANN-based metaheuristic models for the study of the durability characteristics of high-volume fly ash self-compacting concrete with silica fume10.1016/j.jobe.2024.109844 ↗
24. Mix design and mechanical properties of geopolymer and alkali activated concrete: review of the state-of-the-art and the development of a new unified approach10.1016/j.conbuildmat.2020.119380 ↗
25. Probabilistic estimation for mechanical properties of self-compacting geopolymer concrete using machine learning technique10.1007/s13369-023-07866-x ↗
26. Multiscale characterization at early ages of ultra-high performance geopolymer concrete10.3390/polym14245504 ↗
27. Self-compacting geopolymer concrete with an alkaline activator ratio
28. Effects of micro-structure characteristics of interfacial transition zone on the compressive strength of self-compacting geopolymer concrete10.1016/j.conbuildmat.2012.11.067 ↗
29. The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature10.1016/j.matdes.2014.05.001 ↗
30. Effect of GGBS addition on reactivity and microstructure properties of ambient cured fly ash based geopolymer concrete10.1007/s12633-020-00470-w ↗
31. Mechanical and microstructural properties of quaternary binder system containing OPC-GGBS-metakaolin-lime10.1016/j.matpr.2022.05.074 ↗
32. Fresh, hardened, and microstructural properties of ambient cured one-part alkali-activated self-consolidating concrete10.3390/su15032451 ↗
33. Influence of activator solution on microstructural and mechanical properties of geopolymer concrete10.1016/j.mtla.2020.100659 ↗
34. Effect of curing condition on the mechanical properties of fly ash-based geopolymer concrete10.1007/s42452-019-1774-8 ↗
35. Flexural strength and elastic modulus of ambient-cured blended low-calcium fly ash geopolymer concrete10.1016/j.conbuildmat.2016.11.034 ↗
36. Experimental and informational modeling study of sustainable self-compacting geopolymer concrete10.3390/su13137444 ↗
37. Design of alkali-activated slag-fly ash concrete mixtures using machine learning
38. Durability and life cycle evaluation of self-compacting concrete containing fly ash as GBFS replacement with alkali activation10.1016/j.conbuildmat.2019.117458 ↗
39. Study on workability and durability characteristics of self-compacting geopolymer concrete composites
40. Sustainable self-compacting geopolymer concrete under ambient curing–durability properties
41. Developing of one-part alkali-activated self-consolidating concrete and investigating its sulfate attack resistance
42. Promulgation of engineering and sustainable performances of self-compacting geopolymer concrete10.1016/j.jobe.2023.106093 ↗
43. Physical and mechanical properties of self-compacting geopolymer concrete with waste glass as partial replacement of fine aggregate10.1016/j.conbuildmat.2024.136956 ↗
44. New insights into the production of sustainable synthetic aggregates and their microstructural evaluation10.3989/mc.2023.328722 ↗