Study on as-cast microstructure of Fe-15Mn-10Al-5Ni-0.8C low density duplex steel
Source abstract
Abstract
Abstract The microstructure of Fe-15Mn-10Al-5Ni-0.8C low density duplex steel ingots was studied by laser confocal scanning calorimetry , metallographic microscopy and scanning electron microscopy. The results indicated that: the microstructure of Fe-15Mn-10Al-5Ni-0.8C low density steel was mainly composed of coarse austenite dendrites and δ-ferrite phase in dendrite. The δ-ferrite could be completely eliminated by solution treatment. A dynamic model of austenite grain growth was established. Through analysis, it was concluded that the critical temperature for rapid austenite growth was 1250 °C. The activation energy for austenite grain growth was 365 KJ/mol as calculated by Sellars’ model.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Fe–Al–Mn–C lightweight structural alloys: a review on the microstructures and mechanical properties10.1088/1468-6996/14/1/014205 ↗
2. Microstructure Evolution and Age-Hardening Behavior of Microalloyed Austenitic Fe-30Mn-9Al-0.9C Light-Weight Steels10.1007/s11661-017-4265-9 ↗
3. Low temperature mechanical behaviour of microalloyed and controlled-rolled Fe–Mn–Al–C–X alloys10.1007/BF02663026 ↗
4. Behaviour of Fe–Mn–Al–C steels during cyclic tests
5. High temperature oxidation of iron-manganese-aluminium based alloys10.1007/BF00741468 ↗
6. Microstructures and mechanical properties of high-strength Fe–Mn–Al–C light-weight triplex steels10.1002/srin.200606440 ↗
7. Effect of the Strain Rate on the TRIP–TWIP Transition in Austenitic Fe-12 pct Mn-0.6 pct C TWIP Steel10.1007/s11661-013-2028-9 ↗
8. Effect of martensitic phase transformation and deformation twinning on mechanical properties of Fe–Mn–Si–Al steels10.1179/mst.1998.14.12.1213 ↗
9. Origin of extended tensile ductility of a Fe–28Mn–10Al–1C steel10.1007/s11661-009-9862-9 ↗
10. Multistage strain hardening through dislocation substructure and twinning in a high strength and ductile weight-reduced Fe–Mn–Al–C steel10.1016/j.actamat.2012.07.018 ↗
11. Current state of Fe–Mn–Al–C Low Density Steels10.1016/j.pmatsci.2017.05.002 ↗
12. Effects of Mn contents on the microstructure and mechanical properties of the Fe–10Al–xMn–1.0C alloy10.2320/matertrans.43.2635 ↗
13. An Overview of the Effects of Alloying Elements on the Properties of Lightweight Fe-(15–35) Mn-(5–12) Al-(0.3–1.2) C Steel10.1007/s11837-018-2837-9 ↗
14. Effect of normalizing temperature on microstructural stability and mechanical properties of creep strength enhanced ferritic P91 steel10.1016/j.msea.2016.01.066 ↗
15. Effect of long-term ageing on the microstructure and mechanical properties of creep strength enhanced ferritic P91 steel10.1007/s12666-015-0826-z ↗
16. Effect of aging on the microstructure and deformation behaviour of austenite base lightweight Fe–28Mn–9Al–0.8C steel10.1016/j.scriptamat.2010.07.036 ↗
17. Evolution of phases in P91 steel in various heat treatment conditions and their effect on microstructure stability and mechanical properties10.1016/j.msea.2016.03.132 ↗
18. Goldbeck · 1982
19. Microstructural influence on mechanical properties of a lightweight ultrahigh strength Fe–18Mn–10Al–0.9C–5Ni (wt%) steel10.3390/met10101305 ↗
20. Dynamic recrystallization mechanisms of an Fe–8% Al low density steel under hot rolling conditions10.1016/j.scriptamat.2012.07.037 ↗
21. Brittle intermetallic compound makes ultrastrong low-density steel with large ductility10.1038/nature14144 ↗
22. Isothermal sections in the (Fe, Ni)-rich part of the Fe–Ni–Al phase diagram10.1007/s11669-008-9319-7 ↗
23. κ-carbide hardening in a low-density high-Al high-Mn multiphase steel10.1016/j.matlet.2014.09.104 ↗
24. Microstructures, mechanical properties and deformation of near-rapidly solidified low-density Fe–20Mn–9Al–1.2C–xCr steels10.1016/j.matdes.2019.108307 ↗
25. γ Decomposition in Fe–Mn–Al–C lightweight steels—sciencedirect10.1016/j.jmrt.2020.02.088 ↗
26. Phase transformation mechanism and hardness during ageing of an austenitic Fe–30Mn–10.5Al–1.1C–3Mo lightweight steel10.1016/j.jallcom.2019.06.362 ↗