Mix proportion optimization and early strength development in modified foam concrete: an experimental study
Source abstract
Abstract
Abstract The influence of the single polycarboxylate superplasticizer (PCE) and blending it mixed hydroxypropyl methylcellulose (HPMC) on hardening moulding quality and surface pulverisation of foam concrete was investigated. An orthogonal experimental design was employed to determine the optimum combination of parameters for four property indexes (PIs) in this paper. A multi-index matrix analysis method was used to evaluate the parameter combinations and obtain the overall optimal performance for the PIs. The effect of calcium formate (CaF) on the early compressive strength of modified foam concrete with the most optimal combination in different density grades was also studied. The results indicate that the incomplete cement hydration reaction is the essential cause of pulverisation, which can be alleviated by adding a suitable PCE. Defoaming and precipitation occur when the PCE incorporated exceeds 0.1%, which can be mitigated by the addition of 0.02 to 0.06% HPMC. The orthogonal analysis indicates that the anti-cracking agent has a more substantial effect on the strength of the foam concrete than the thickening agent. The most significant factor of mechanical properties is PP fiber followed by dispersible latex powder (DLP). The optimal combination of foam concrete is 0.06% HPMC, 0.3% DLP, and 0.5% PP fiber. The early compressive strength of foam concrete can be significantly enhanced by increasing the CaF content. However, increasing the density level results in a decrease in the 28-day compressive strength of the foam concrete.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Using foamed concrete layer to optimize the design of pavement and subgrade structures: from the perspectives economy and durability10.1007/s13369-023-07606-1 ↗
2. Properties of foamed concrete containing water repellents10.1016/j.conbuildmat.2016.06.148 ↗
3. Mechanical and physical properties of silt-based foamed concrete with different silt types10.1007/s13369-021-06551-1 ↗
4. Quantification of factors influencing the thermal conductivity of cement-based foam10.1016/j.cemconcomp.2018.04.015 ↗
5. Investigation of the effect of silica fume and synthetic foam additive on cell structure in ultra-low density foam concrete
6. Effect of ingredients ratios on the strength of foamed concrete: an experimental study10.1007/s41062-023-01039-3 ↗
7. Characterization of EPS lightweight concrete microstructure by x-ray tomography with consideration of thermal variations10.1016/j.conbuildmat.2018.05.142 ↗
8. Performance properties of structural fibred-foamed concrete10.1016/j.rineng.2019.100092 ↗
9. Study on the heat of hydration and strength development of cast-in-situ foamed concrete10.1155/2020/9061819 ↗
10. Experimental research on the dynamic mechanical properties and damage characteristics of lightweight foamed concrete under impact loading10.1016/j.ijimpeng.2020.103558 ↗
11. Mechanical properties of non-autoclaved foam concrete: analytical models vs. experimental data10.1080/19648189.2017.1398108 ↗
12. Experimental investigation on the compressive strength of foamed concrete: effect of curing conditions, cement type, foaming agent and dry density10.1016/j.conbuildmat.2017.12.241 ↗
13. Effect of fly ash and silica fume on hardened properties of foam concrete10.1016/j.conbuildmat.2018.11.036 ↗
14. Optimization of lightweight foamed concrete using fly ash based on mechanical properties10.1007/s41062-022-01016-2 ↗
15. Non-autoclaved high strength cellular concrete from alkali activated slag10.1016/j.conbuildmat.2011.06.010 ↗
16. Influence of foaming agent on cement and foam concrete10.1016/j.conbuildmat.2021.122399 ↗
17. Stability and instability of foamed concrete10.1680/macr.15.00097 ↗
18. Effect of water-cement ratio on pore structure and strength of foam concrete10.1155/2016/9520294 ↗
19. The stabilizing effect of carboxymethyl cellulose on foamed concrete10.3390/ijms232415473 ↗
20. An experimental investigation on the effect of carboxymethyl cellulose on morphological characteristics of dust-suppression foam and its mechanism exploration10.1016/j.psep.2019.12.009 ↗
21. Effect of hydroxypropyl methyl cellulose (HPMC) as foam stabilizer on the workability and pore structure of iron tailings sand autoclaved aerated concrete10.1016/j.conbuildmat.2023.130979 ↗
22. Influence of hydroxypropyl methylcellulose and silica fume on stability, rheological properties, and printability of 3D printing foam concrete10.1016/j.cemconcomp.2021.104158 ↗
23. Influence of HPMC and SF on buildability of 3D printing foam concrete: from water state and flocculation point of view10.1016/j.compositesb.2022.110075 ↗
24. Study on preparation and rheological properties of 3D printed pre-foaming concrete10.3390/app13095303 ↗
25. Preparation and characterization of high porosity cement-based foam material10.1016/j.conbuildmat.2015.05.032 ↗
26. Designing a superhydrophobic quality and strengthening mechanism for foam concrete10.1016/j.conbuildmat.2022.130073 ↗
27. Stability criterion for fresh cement foams10.1016/j.cemconres.2019.105865 ↗
28. Durability properties of high performance foamed concrete10.1016/j.proeng.2017.02.120 ↗
29. Mechanical properties of natural fiber reinforced foamed concrete10.3390/ma13143060 ↗
30. Compressive and flexural strength of fiber-reinforced foamed concrete: effect of fiber content, curing conditions and dry density10.1016/j.conbuildmat.2018.11.197 ↗
31. Improving the flexural capacity of extrudable foamed concrete with glass-fiber bi-directional grid reinforcement: an experimental study10.1016/j.compstruct.2018.10.092 ↗
32. Laboratory tests of foam concrete slabs reinforced with composite grid10.1016/j.proeng.2017.06.222 ↗
33. GB/T 27690-2011(Code of China)
34. JG/T 266-2011(Code of China)
35. GB/T 11969-2008(Code of China)
36. GB/T 29062-2012(Code of China)
37. GB/T 17671-2021(Code of China)
38. Relative importance of certain factors affecting the thermal environment in subway stations based on field and orthogonal experiments
39. Eco-friendly incorporation of sugarcane bagasse ash as partial replacement of sand in foam concrete10.1016/j.clet.2021.100164 ↗
40. Rosen · 2012
41. Effect of hydroxypropyl-methyl cellulose ether on rheology of cement paste plasticized by polycarboxylate superplasticizer10.1016/j.conbuildmat.2017.11.010 ↗
42. Improvement of viscosity-modifying agents on air-void system of vibrated concrete10.1016/j.conbuildmat.2019.117843 ↗
43. Application of organic- and nanoparticle-modified foams in foamed concrete: reinforcement and stabilization mechanisms10.1016/j.cemconres.2018.01.020 ↗
44. Working mechanism of methyl hydroxyethyl cellulose (MHEC) as water retention agent10.1016/j.cemconres.2012.03.016 ↗
45. Experimental investigation on the mechanical properties and microstructure of hybrid fiber reinforced recycled aggregate concrete10.1016/j.conbuildmat.2020.120488 ↗
46. Experiment on dynamic mechanical properties of steel and macro-polypropylene hybrid fibers reinforced recycled aggregate concrete under uniaxial compression
47. Impact load-induced micro-structural damage and micro-structure associated mechanical response of concrete made with different surface roughness and porosity aggregates10.1016/j.cemconres.2011.09.015 ↗
48. An investigation on mechanical and physical properties of recycled aggregate concrete (RAC) with and without silica fume10.1016/j.conbuildmat.2014.02.057 ↗
49. Development and functional characteristics of novel foam concrete10.1016/j.conbuildmat.2022.126666 ↗
50. Property assessment of hybrid fiber-reinforced ultra-high-performance concrete10.1007/s40999-017-0145-3 ↗
51. Investigation on mechanical properties and microstructure of high performance polypropylene fiber reinforced lightweight aggregate concrete10.1016/j.conbuildmat.2016.04.116 ↗
52. Effect of calcium formate as an accelerator on the physicochemical and mechanical properties of pozzolanic cement pastes10.1016/j.cemconres.2003.11.015 ↗