Enhanced chitosan fibres for skin regeneration: solution blow spinning and incorporation with platelet lysate and tannic acid
Source abstract
Abstract
Abstract In this study, we developed and characterised enhanced chitosan/polyethylene oxide (PEO) nanofibre scaffolds using solution blow spinning (SBS) for potential application in skin tissue engineering. SBS enabled the efficient and scalable production of fibre matrices with precise morphology control, facilitating the integration of PEO to improve spinnability, 100X the speed of electron spinning. Following fabrication, fibres were subjected to potassium carbonate neutralisation to reduce PEO content, improving chitosan stability in aqueous environments. Characterisation by scanning electron microscopy (SEM) and attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR) confirmed structural integrity post-neutralisation and the successful incorporation with bioactive additives. Platelet lysate (PL) was incorporated to introduce growth factors, and tannic acid (TA) was added for antibacterial properties and enhanced mechanical stability through potential crosslinking. Mechanical testing showed that the optimised PL- and TA-enriched scaffolds exhibited the highest mechanical performance, with Young’s modulus of 7.0 ± 0.6 MPa, an ultimate tensile strength of 26.4 ± 2.3 MPa, elongation at break of 16.5 ± 1.7%, and toughness of 3.0 ± 0.3 MJ m−3 which is within the range of human skin. At the same time, SEM and ATR-FTIR analyses confirmed the stability and distribution of these functional agents within the fibre network. Biocompatibility tests with normal human dermal fibroblasts (NHDF) indicated low cytotoxicity, appropriate cell adhesion and proliferation over 14 days in culture, suggesting these scaffolds as promising candidates for wound healing and skin regeneration applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. Mind the gap: disparity between research funding and care costs for diabetic foot ulcers10.2337/dc12-2285 ↗
2. A narrative review of the history of skin grafting in burn care10.3390/medicina57040380 ↗
3. Natural polymeric biomaterials in growth factor delivery for treating diabetic foot ulcers10.1016/j.jddst.2019.101385 ↗
4. Designing multigradient biomaterials for skin regeneration10.1016/j.mtadv.2019.100051 ↗
5. Recent developments in chitosan-based micro/nanofibers for sustainable food packaging, smart textiles, cosmeceuticals, and biomedical applications10.3390/molecules26092683 ↗
6. Chitosan derivatives obtained by chemical modifications for biomedical and environmental applications10.1016/j.ijbiomac.2008.09.007 ↗
7. Wound dressings: current advances and future directions10.1002/app.47738 ↗
8. Overview of antimicrobial polyurethane-based nanocomposite materials and associated signalling pathways10.1016/j.eurpolymj.2022.111087 ↗
9. Characterization of electrospinning chitosan nanofibers used for wound dressing10.3390/polym16141984 ↗
10. Treatment of residual pockets using an oscillating chitosan device versus regular curettes alone-A randomised, feasibility parallel-arm clinical trial10.1002/JPER.21-0496 ↗
11. An investigation of the potential application of chitosan/aloe-based membranes for regenerative medicine10.1016/j.actbio.2013.02.027 ↗
12. New antimicrobial chitosan derivatives for wound dressing applications10.1016/j.carbpol.2015.12.078 ↗
13. A review of current advancements for wound healing: Biomaterial applications and medical devices10.1002/jbm.b.35086 ↗
14. In vitro biological response of human osteoblasts in 3D chitosan sponges with controlled degree of deacetylation and molecular weight10.1016/j.carbpol.2020.117434 ↗
15. Functionalized microparticles producing scaffolds in combination with cells10.1002/adfm.201301516 ↗
16. Chitosan as a starting material for wound healing applications10.1016/j.ejpb.2015.08.004 ↗
17. Comparative analysis of collagen and chitosan-based dressing for haemostatic and wound healing application10.1208/s12249-021-01944-9 ↗
18. Haemostatic materials for wound healing applications10.1038/s41570-021-00323-z ↗
19. Structural and functional design of electrospun nanofibers for hemostasis and wound healing10.1007/s42765-022-00178-z ↗
20. Advances in electrospun nanofiber membranes for dermatological applications: a review10.3390/molecules29174271 ↗
21. Acellularization-induced changes in tensile properties are organ specific - an in-vitro mechanical and structural analysis of porcine soft tissues10.1371/journal.pone.0151223 ↗
22. Future prospects for scaffolding methods and biomaterials in skin tissue engineering: a review10.3390/ijms17121974 ↗
23. Ultraviolet light-assisted electrospinning of core–shell fully cross-linked P (NIPAAm-co-NIPMAAm) hydrogel-based nanofibers for thermally induced drug delivery self-regulation10.1002/admi.202000247 ↗
24. Solution blow spinning of polycaprolactone-rheological determination of spinnability and the effect of processing conditions on fiber diameter and alignment10.3390/ma14061463 ↗
25. Solution Blow Spinning (SBS): a promising spinning system for submicron/nanofibre production10.31881/TLR.2021.04 ↗
26. Nanofibrous tubular scaffolds for tissue engineering of small-diameter vascular grafts—development using SBS fabrication technique and mechanical performance10.1007/s42600-022-00219-x ↗
27. Electrospinning: a fascinating fiber fabrication technique10.1016/j.biotechadv.2010.01.004 ↗
28. Advances in functional polymer nanofibers: from spinning fabrication techniques to recent biomedical applications10.1021/acsami.0c12410 ↗
29. Complex characterization of nanofiber biomaterials based on chitosan, collagen and fish gelatine produced by electrospinning10.1080/00032719.2024.2372348 ↗
30. Large-scale fabrication of robust artificial skins from a biodegradable sealant-loaded nanofiber scaffold to skin tissue via microfluidic blow-spinning10.1002/adma.202000982 ↗
31. A review of the fundamental principles and applications of solution blow spinning10.1021/acsami.6b12994 ↗
32. Exploiting inherent instability of 2D black phosphorus for controlled phosphate release from blow-spun poly(lactide--glycolide) nanofibers10.1021/acsanm.8b00938 ↗
33. Evaluation of the influence of platelet-rich plasma (PRP), platelet lysate (PL) and mechanical loading on chondrogenesis in vitro10.1038/s41598-021-99614-0 ↗
34. Advanced hydrogels based on natural macromolecules: chemical routes to achieve mechanical versatility10.1016/j.mtchem.2022.101222 ↗
35. Tannic acid with antiviral and antibacterial activity as a promising component of biomaterials-a minireview10.3390/ma13143224 ↗
36. Cationic, anionic and neutral polysaccharides for skin tissue engineering and wound healing applications10.1016/j.ijbiomac.2021.10.013 ↗
37. Electrospun chitosan nanofibers for wound healing application10.1016/j.engreg.2021.08.001 ↗
38. A review on biopolymer-derived electrospun nanofibers for biomedical and antiviral applications10.1039/D2BM00820C ↗
39. Current approaches to electrospun nanofibers for tissue engineering10.1088/1748-6041/8/1/014102 ↗
40. Electrospinning of nanofibres10.1038/s43586-023-00278-z ↗
41. Industrial upscaling of electrospinning and applications of polymer nanofibers: a review10.1002/mame.201200290 ↗
42. Solution blow spinning of highly deacetylated chitosan nanofiber scaffolds for dermal wound healing10.1016/j.bioadv.2022.212871 ↗
43. Preparation of pure and stable chitosan nanofibers by electrospinning in the presence of poly(ethylene oxide)10.3390/ijms17111790 ↗
44. Using solution electrowriting to control the properties of tubular fibrous conduits10.1021/acsbiomaterials.0c01419 ↗
45. Surface and thermal behavior of chitosan/poly(ethylene oxide) blends10.1080/15421406.2016.1255518 ↗
46. A fundamental study of chitosan/PEO electrospinning10.1016/j.polymer.2011.08.034 ↗
47. Cerium-doped bioactive glass-loaded chitosan/polyethylene oxide nanofiber with elevated antibacterial properties as a potential wound dressing10.1016/j.ceramint.2020.12.078 ↗
48. Physicomechanical properties and in vitro release behaviors of electrospun ibuprofen-loaded blend PEO/EC fibers10.1016/j.mtcomm.2022.103205 ↗
49. Chitosan reinforced with kenaf nanocrystalline cellulose as an effective carrier for the delivery of platelet lysate in the acceleration of wound healing10.3390/polym13244392 ↗
50. Platelet lysate loaded electrospun scaffolds: Effect of nanofiber types on wound healing10.1016/j.ejpb.2019.06.030 ↗
51. Preparation and characterization of platelet lysate (pl)-loaded electrospun nanofibers for epidermal wound healing10.1016/j.xphs.2022.04.008 ↗
52. Platelet-rich fibrin-loaded PCL/chitosan core–shell fibers scaffold for enhanced osteogenic differentiation of mesenchymal stem cells10.1016/j.carbpol.2021.118351 ↗
53. Hybrid PCL/chitosan-PEO nanofibrous scaffolds incorporated with A. euchroma extract for skin tissue engineering application10.1016/j.carbpol.2021.118926 ↗
54. Tannic acid incorporation in chitosan-based microparticles and in vitro controlled release10.1007/s10856-008-3675-z ↗
55. Scaffold geometry modulation of mechanotransduction and its influence on epigenetics10.1016/j.actbio.2022.01.020 ↗
56. Engineering bioactive scaffolds for skin regeneration10.1002/smll.202101384 ↗
57. Skin wound healing: skin regeneration with pharmacological mobilized stem cells
58. Design challenges in polymeric scaffolds for tissue engineering10.3389/fbioe.2021.617141 ↗
59. Increasing electrospun scaffold pore size with tailored collectors for improved cell penetration10.1016/j.actbio.2011.02.036 ↗
60. Electrospun bilayer fibrous scaffolds for enhanced cell infiltration and vascularization in vivo10.1016/j.actbio.2014.11.014 ↗
61. Gelatin-poly(vinyl alcohol) porous biocomposites reinforced with graphene oxide as biomaterials10.1039/C5TB02132D ↗
62. Effect of carboxylic acid functionalized graphene on physical-chemical and biological performances of polysulfone porous films10.1016/j.polymer.2016.03.040 ↗
63. Human fibroblast migration in three-dimensional collagen gel in response to noninvasive electrical stimulus. I. Characterization of induced three-dimensional cell movement
64. Fully synthetic 3D fibrous scaffolds for stromal tissues-replacement of animal-derived scaffold materials demonstrated by multilayered skin10.1002/adma.202106780 ↗
65. Development of a 3D cell culture system for investigating cell interactions with electrospun fibers10.1002/bit.21309 ↗
66. Effect of platelet lysate on human cells involved in different phases of wound healing10.1371/journal.pone.0084753 ↗
67. Platelet lysate stimulates wound repair of HaCaT keratinocytes10.1111/j.1365-2133.2008.08699.x ↗
68. Platelet lysate induces in vitro wound healing of human keratinocytes associated with a strong proinflammatory response10.1089/ten.tea.2010.0729 ↗
69. Platelet lysate as a serum replacement for skin cell culture on biomimetic PCL nanofibers10.1080/09537104.2017.1316838 ↗
70. Tannic acid-crosslinked chitosan matrices enhance osteogenic differentiation and modulate epigenetic status of cultured cells over glutaraldehyde crosslinking10.1080/1539445X.2021.1933032 ↗
71. Tannic acid-loaded chitosan-RGD-alginate scaffolds for wound healing and skin regeneration10.1088/1748-605X/acce88 ↗
72. Tannic acid modified keratin/sodium alginate/carboxymethyl chitosan biocomposite hydrogels with good mechanical properties and swelling behavior10.1038/s41598-024-63186-6 ↗
73. A competitive nature-derived multilayered scaffold based on chitosan and alginate, for full-thickness wound healing10.1016/j.carbpol.2021.117921 ↗
74. Enzymatically induced mineralization of platelet-rich fibrin10.1002/jbm.a.34073 ↗
75. Use of 3D-printed polylactic acid/bioceramic composite scaffolds for bone tissue engineering in preclinical in vivo studies: a systematic review10.1016/j.actbio.2023.07.013 ↗