journal article·2024-12-01Open access

Exploring the role of Germanium on the optoelectronic and thermoelectric response in making ductile lead-free perovskite halide using DFT

Umair Mumtaz, Saira Kiran, Sarfraz Ahmad, Fayyaz Hussain, Syed Awais Rouf, R M A Khalil, Manawwer Alam, Rizwan Wahab, Muhammad Fahad Ehsan

Materials Research Express· Volume 11· Issue 12

Abstract

Abstract The structural instability observed owing to Sn2+ and the toxic effects of lead has prohibited the commercial use of all inorganic CsPb1-xSnxBr3 for optoelectronic memory device applications. In this work, we have inspected the structural, mechanical, electronic, optical, and thermoelectric response of all inorganic halide perovskite CsPb1-xGexBr3 (x = 0, 0.25, 0.50, 0.75, 1) to overcome the stability and toxicity of this optoelectronic resistive switching material using the full-potential linearized augmented-plane wave (FP-LAPW) method grounded on density functional theory (DFT). Tran–Blaha-modified Becky-Johnson (TB-mBJ) approximation is used for the self-consistent field (SCF) calculations of considered halide perovskite CsPb1-xGexBr3. It is clear from the band structure that all compounds are semiconductors in nature. Moreover, the bandgap decreased with the increase in the concentration of Germanium (Ge) causing the bandgap tuning. The overall absorption of incident radiations increased and energy loss decreased with the increase in doping concentration, especially in the visible region. The thermoelectric properties have also been studied by using the BoltzTraP2 code. All the results computed physical properties confirmed the feasibility of these all-inorganic materials for their use in the fabrication of ductile, optical resistive switching memory RRAM devices.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Perovskite Materials and Applications · Optical and Acousto-Optic Technologies · Solid-state spectroscopy and crystallography

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Recent progress in optoelectronic memristors for neuromorphic and in-memory computation10.1088/2634-4386/acd4e2 ↗
2. Multifunctional optoelectronic random access memory device based on surface-plasma-treated inorganic halide perovskite10.1002/aelm.202100366 ↗
3. Two-terminal multibit optical memory via van der waals heterostructure10.1002/adma.201807075 ↗
4. The resistive switching effects in BaTiO3/ZnO/BaTiO3/Carbon film10.1142/S1793604718500601 ↗
5. Light and magnetic field double modulation on the resistive switching behavior in BaTiO3/FeMn/BaTiO3 trilayer films10.1016/j.physleta.2017.04.039 ↗
6. Optoelectronic modulation of interfacial defects in lead-free perovskite films for resistive switching
7. Putting DFT to the trial: First principles pressure dependent analysis on optical properties of cubic perovskite SrZrO310.1016/j.cocom.2015.07.002 ↗
8. Structural and optical properties of CaTiO3 perovskite-based materials obtained by microwave-assisted hydrothermal synthesis: An experimental and theoretical insight10.1016/j.actamat.2009.07.019 ↗
9. Progress on lead-free metal halide perovskites for photovoltaic applications: a review10.1007/s00706-017-1933-9 ↗
10. Natural and engineered perovskites10.1126/science.358.6364.732 ↗
11. Stability of all-inorganic perovskite solar cells10.1016/j.nanoen.2019.104249 ↗
12. All-inorganic perovskite solar cells: recent advancements and challenges10.3390/nano12101651 ↗
13. Carbon electrode engineering for high efficiency all-inorganic perovskite solar cells10.1039/D0RA00288G ↗
14. Elegant face-down liquid-space-restricted deposition of CsPbBr3 films for efficient carbon-based all-inorganic planar perovskite solar cells10.1021/acsami.8b00358 ↗
15. Bifunctional Stabilization of All-Inorganic α-CsPbI3 Perovskite for 17% Efficiency Photovoltaics10.1021/jacs.8b07927 ↗
16. All-inorganic cesium lead iodide perovskite solar cells with stabilized efficiency beyond 15%10.1038/s41467-018-06915-6 ↗
17. Long-term ambient air-stable cubic CsPbBr3 perovskite quantum dots using molecular bromine10.1039/C9NA00486F ↗
18. Tin–lead alloying for efficient and stable all-inorganic perovskite solar cells10.1021/acs.chemmater.9b04265 ↗
19. Metal-doped lead halide perovskites: synthesis, properties, and optoelectronic applications10.1021/acs.chemmater.8b02989 ↗
20. Air-stable CsPb1−xBixBr3 (0 ≤ x ≪ 1) perovskite crystals: optoelectronic and photostriction properties10.1039/C7TC00417F ↗
21. Temperature-dependent optical band gap in CsPbBr3, MAPbBr3, and FAPbBr3 single crystals10.1021/acs.jpclett.0c00295 ↗
22. Anomalous Band Gap Behavior in Mixed Sn and Pb Perovskites Enables Broadening of Absorption Spectrum in Solar Cells10.1021/ja5033259 ↗
23. Lead-free halide perovskite photovoltaics: challenges, open questions, and opportunities10.1063/5.0022271 ↗
24. Progress of Pb-Sn mixed perovskites for photovoltaics: a review10.1002/eem2.12211 ↗
25. Recent advances in Pb–Sn mixed perovskite solar cells10.1016/j.jechem.2022.07.003 ↗
26. On biosafety of Sn-containing halide perovskites10.1039/D2EE02510H ↗
27. Direct deposition of Sn-doped CsPbBr3 perovskite for efficient solar cell application10.1039/D0RA09202A ↗
28. Revealing the local Sn and Pb arrangements in CsSnxPb1– xBr3 perovskites with solid-state NMR spectroscopy10.1021/acsmaterialslett.0c00596 ↗
29. Hazard assessment of germanium supplements10.1006/rtph.1997.1098 ↗
30. Germanium-based halide perovskites: materials, properties, and applications10.1002/cplu.202100191 ↗
31. 97.3% Pb-Reduced CsPb1–xGexBr3 perovskite with enhanced phase stability and photovoltaic performance through surface Cu doping10.1021/acs.jpclett.0c03580 ↗
32. DFT calculations of solids with LAPW and WIEN2k10.1016/S0022-4596(03)00213-5 ↗
33. WIEN2k: An augmented plane wave+ local orbitals program for calculating crystal properties
34. Generalized gradient approximation for the exchange-correlation hole of a many-electron system10.1103/PhysRevB.54.16533 ↗
35. Merits and limits of the modified Becke-Johnson exchange potential10.1103/PhysRevB.83.195134 ↗
36. Performance of the modified Becke Johnson potential for semiconductors10.1103/PhysRevB.86.195106 ↗
37. The compressibility of media under extreme pressures10.1073/pnas.30.9.244 ↗
38. An emerging all-inorganic CsSnxPb1–xBr3 (0 ≤ x ≤ 1) perovskite single crystal: insight on structural phase transition and electronic properties10.1021/acs.jpcc.0c02423 ↗
39. Crystal structure features of CsPbBr3 perovskite prepared by mechanochemical synthesis10.1021/acsomega.9b04248 ↗
40. A DFT study of electronic, optical and thermoelectric properties of Ge-halide perovskites CsGeX3 (X=F, Cl and Br)10.1016/j.cocom.2022.e00663 ↗
41. Electronic and optical properties of CsGeX3 (X=Cl, Br, and I) compounds10.1021/acsomega.2c02088 ↗
42. Revealing structural, elastic, electronic and optical properties of potential perovskites K2CuBiX6 (X¼Br, Cl) based on first-principles10.1016/j.jssc.2022.123046 ↗
43. Emsley · 2011
44. Optical properties of nitrogen-doped SnO2 films: effect of the electronegativity on refractive index and band gap10.1063/1.2908197 ↗
45. Bandgap calculations and trends of organometal halide perovskites10.1063/1.4893495 ↗
46. The effect of electronegative difference on the electronic structure and visible light photocatalytic activity of N-doped anatase TiO2 by first-principles calculations10.1063/1.3579199 ↗
47. Optical functions of nanocrystalline ZnO containing voids and doped with Ga10.1117/12.929866 ↗
48. Density functional theory insight into metal ions and vacancies for improved performance in storage devices
49. In-depth study of the Ruddlesden-Popper LaxSr2−xMnO4±δ family as possible electrode materials for symmetrical SOFC10.1016/j.ijhydene.2017.07.062 ↗
50. Synthesis and structural and magnetic characterization of mixed manganese−copper n = 1 ruddlesden−popper phases10.1021/cm061661j ↗
51. Evolution of orthorhombic domain structures during the tetragonal-to-orthorhombic phase transition in the layered perovskite Sr2−xLaxMnO410.1103/PhysRevB.74.085113 ↗
52. Structural, optical and electronic properties of CuO and Zn doped CuO: DFT based First-principles calculations10.1016/j.chemphys.2019.110536 ↗
53. Vittoria · 1993 · p 248
54. Kramers–Kronig relations in nonlinear optics10.1063/1.114235 ↗
55. Structural, electronic and optical properties of cubic SrTiO3 and KTaO3: Ab initio and GW calculations10.1016/j.physb.2012.04.013 ↗
56. Optical properties of new photovoltaic materials: AgCuO2 and Ag2Cu2O310.1016/j.ssc.2009.05.042 ↗
57. Investigation of the origin of the empirical relationship between refractive index and density on the basis of first principles calculations for the refractive indices of various TiO2 phases10.1021/ic035383r ↗
58. Optical and structural properties of CsPbBr3 perovskite quantum dots/PFO polymer composite thin films10.1016/j.jcis.2019.12.094 ↗