journal article·2025-01-01Open access

Optimization of SiC reinforced Al7039/Cu composites for enhanced thermal conductivity and hardness via response surface methodology

Fetene Teshome Teferi, Kishor Purushottam Kolhe, Assefa Asmare Tsegaw, Samuel Olawale Fatoba

Materials Research Express· Volume 12· Issue 1

Abstract

Abstract Advancements in engineering technologies are fundamentally driven by the development of superior materials with tailored properties to meet stringent application demands. Metal matrix composites (MMCs) have emerged as essential solutions for such customization. This study presents the synthesis and optimization of Al7039/Cu/SiC MMCs to significantly enhance thermal conductivity and hardness using Response Surface Methodology (RSM). The composites were fabricated by combining aluminum 7039 alloy with high-purity copper (99.98%) and reinforcing them with silicon carbide (SiC) particles. Specimens were efficiently produced using a cost-effective stir casting method with silica sand shell molds using an induction melting furnace. The optimization process involved varying the weight fractions of Al7039 (73%–91%), Cu (4%–12%), and SiC (5%–15%) across 20 experimental runs. Hardness and thermal conductivity were measured using a Rockwell B tester and steady-state linear testing, respectively. Analysis of variance (ANOVA) confirmed that weight fraction variations significantly influenced the measured properties. Statistically significant quadratic models were developed, exhibiting less than 5% variation at a 95% confidence level. Numerical optimization indicated that decreasing Al7039 content while increasing Cu and SiC fractions maximizes thermal conductivity and hardness. This process identified 34 viable solutions, with the optimal composition being 69.22 wt% Al7039, 12 wt% Cu, and 15 wt% SiC. This formulation achieved a thermal conductivity of 167.2 W/m. K and a hardness of 186.1 BHN, corresponding to a desirability score of 0.859 (86%). For robust validation, experiments were meticulously conducted in triplicate using the same procedures and equipment as in the predictive modeling. The experimental results closely matched the predicted values, yielding 169.6 W/m. K and 190.4 BHN improvements of 17.5% and 30% in thermal conductivity and hardness over the base Al7039 alloy, respectively. The optimized Al7039/Cu/SiC composites exhibit significant enhancements over the base alloy, offering excellent properties suitable for demanding applications such as heat sinks, heat exchangers, mold tooling, and critical components in the automotive and aerospace sectors. This study emphasizes the potential of optimized MMCs to efficiently and cost-effectively fulfill advanced engineering requirements, promoting their adoption in innovative technologies.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Additive Manufacturing and 3D Printing Technologies · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (93)

Show source-provided references
1. Advanced production routes for metal matrix composites10.1002/eng2.12330 ↗
2. Polymer-assisted metal deposition (PAMD) for flexible and wearable electronics: principle, materials, printing, and devices10.1002/adma.201902987 ↗
3. Metal matrix composites fabricated by stir casting process–a review10.1080/2374068X.2020.1855404 ↗
4. Recent developments towards commercialization of metal matrix composites10.3390/ma13122828 ↗
5. A review on aa 6061 metal matrix composites produced by stir casting10.3390/ma14010175 ↗
6. 50 Years of foundry-produced metal matrix composites and future opportunities10.1007/s40962-019-00375-4 ↗
7. Ceramic matrix composites for aero engine applications—a review10.3390/app13053017 ↗
8. Mechanical properties of aluminium-graphene/carbon nanotubes (CNTs) metal matrix composites: advancement, opportunities and perspective10.1016/j.materresbull.2021.111224 ↗
9. A review on fabrication methods, reinforcements and mechanical properties of aluminum matrix composites10.1016/j.jmapro.2020.05.042 ↗
10. Research status and development trend of preparation technology of ceramic particle dispersion strengthened copper-matrix composites10.1016/j.jallcom.2020.156475 ↗
11. Towards sustainable copper matrix composites: manufacturing routes with structural, mechanical, electrical and corrosion behaviour10.1177/0021998319900655 ↗
12. The advancement of 7xxx series aluminum alloys for aircraft structures: a review10.3390/met11050718 ↗
13. Experimental study of chemical composition of aluminium alloys10.1016/j.matpr.2020.07.391 ↗
14. Improvement in mechanical, thermal conductivity and corrosion performances of a new high-thermally conductive Al-Si-Fe alloy through a novel R-HPDC process10.1016/j.jmatprotec.2019.116586 ↗
15. Fabricating In Situ powdered nickel–alumina metal matrix composites through microwave heating process: a sustainable approach10.1007/s40962-020-00536-w ↗
16. The advancement of aluminum metal matrix composite reinforced with silicon carbide particles (Al-6061/SiCp): a review
17. Synergistic strengthening mechanism of copper matrix composite reinforced with nano-Al2O3particles and micro-SiC whiskers10.1515/ntrev-2021-0006 ↗
18. Strengthening and weakening effects of particles on strength and ductility of SiC particle reinforced Al-Cu-Mg alloys matrix composites10.3390/ma14051219 ↗
19. Effects of SiC particle size on mechanical properties of SiC particle reinforced aluminum metal matrix composite10.1016/j.msea.2019.03.037 ↗
20. A study of advancement in application opportunities of aluminum metal matrix composites10.1016/j.matpr.2020.02.516 ↗
21. Study on the mechanical and drilling properties of AA7039 composites reinforced with Al2O3/B4C/SiC particles10.1016/j.compositesb.2016.02.054 ↗
22. The mechanical properties of different alloys in friction stir processing: a review10.1016/j.matpr.2017.12.146 ↗
23. A review on the production of metal matrix composites through stir casting—Furnace design, properties, challenges, and research opportunities10.1016/j.jmapro.2019.04.017 ↗
24. The effect of process parameters for synthesized copper metal matrix using stir casting process10.1016/j.matpr.2020.09.262 ↗
25. Effect of SiC and WC reinforcements on microstructural and mechanical characteristics of copper alloy-based metal matrix composites using stir casting route10.3390/app13031754 ↗
26. An experimental analysis of tensile, hardness and wear properties of aluminium metal matrix composite through stir casting process10.1007/s42452-020-2657-8 ↗
27. Processing methods and mechanical properties of aluminium matrix composites10.1155/2020/3765791 ↗
28. Stir cast aluminium metal matrix composites with mechanical and micro-structural behavior: a review10.1016/j.matpr.2020.01.017 ↗
29. Kumar · Stir-Casting: A Development Technique of Metal Matrix Composites · 2020 · III · 9
30. A review on effect of processing parameters on mechanical properties of MMCs by friction stir process10.1063/5.0036274 ↗
31. Treatment of high strength and toughness Al—Si—Cu—Mg cast aluminum alloys
32. Optimization of hardness and wear parameters of Al-Cu-Si alloy using design of experiments10.1016/j.matpr.2020.03.401 ↗
33. Effect of particle size and weight fraction of SiC on the mechanical, tribological, morphological, and structural properties of Al-5.6Zn-2.2Mg-1.3Cu composites using RSM: fabrication, characterization, and modelling10.1016/j.heliyon.2022.e10602 ↗
34. Optimization studies of stir casting parameters and mechanical properties of TiO2 reinforced Al 7075 composite using response surface methodology10.1038/s41598-021-99168-1 ↗
35. Taguchi based Response surface methodology techniques OpƟmizaƟon Grey relaƟonal analysis ( GRG ) ArƟficial neural network ( ANN ) Fuzzy logic analysis
36. Statistical optimization by the response surface methodology of direct recycled aluminum-alumina metal matrix composite (MMC-AlR) employing the metal forming process10.3390/pr8070805 ↗
37. Study on craniocerebral dynamics response and helmet protective performance under the blast waves10.1016/j.matdes.2022.111408 ↗
38. Development of phase-field modeling in materials science in China: a review10.1007/s40195-023-01593-w ↗
39. Manufacturing of metal matrix composites: a state of review10.1016/j.matpr.2019.12.128 ↗
40. Enhancing impact resistance of hybrid structures designed with triply periodic minimal surfaces10.1016/j.compscitech.2023.110365 ↗
41. Benchmark Al-Cu solidification experiments in microgravity and on Earth10.1007/s11661-022-06909-6 ↗
42. Optimization of Al-Cu cast alloy composition for hydraulic valves
43. A new approach to the production of partially graded and laminated composite material composed of SiC-reinforced 7039 Al alloy plates at different rates10.1016/j.compositesb.2017.08.002 ↗
44. Microstructure, mechanical and thermal properties of Al/Cu/SiC laminated composites, fabricated by the ARB and CARB processes10.3390/cryst13020354 ↗
45. Precipitates in aluminium alloys10.1080/23746149.2018.1479984 ↗
46. Role of homogeneous distribution of SiC reinforcement on the characteristics of stir casted Al–SiC composites10.1016/j.jallcom.2021.159250 ↗
47. High strength and high conductivity Cu alloys: a review10.1007/s11431-020-1633-8 ↗
48. Experimental study of chemical composition of aluminium alloys10.1016/j.matpr.2020.07.391 ↗
49. Bhowmik · 2024
50. Characterization and mechanical response of novel Al-(Mg–TiFe–SiC) metal matrix composites developed by stir casting technique10.1177/0021998319851198 ↗
51. Investigation on wear behaviour of Al7075-SiC metal matrix composites prepared by stir casting10.1016/j.matpr.2020.02.617 ↗
52. Effect of SiC reinforcement on microstructure and mechanical properties of aluminum metal matrix composite10.1088/1757-899X/376/1/012057 ↗
53. ScienceDirect method of stir casting of Aluminum metal matrix composites : a review10.1016/j.matpr.2017.01.130 ↗
54. We are IntechOpen, the world’ s leading publisher of open access books built by scientists , for scientists TOP 1%10.5772/57353 ↗
55. Biodiesel synthesis from waste vegetable oil utilizing eggshell ash as an innovative heterogenous catalyst10.47852/bonviewAAES32021761 ↗
56. We are IntechOpen , the world ’ s leading publisher of Open access books built by scientists, for scientists TOP 1%
57. Prediction of specific cutting energy consumption in eco-benign lubricating environment for biomedical industry applications: exploring efficacy of GEP, ANN, and RSM models10.1063/5.0217508 ↗
58. Kumar · 2024
59. Investigation of shell mold casting technique in Ghana using indigenous materials10.1016/j.sciaf.2021.e01052 ↗
60. Shell mold casting manufacture of complex parts with thin sections
61. Micro-structure and mechanical properties of 2A97 Al-Li alloy cast by low-frequency electromagnetic casting10.3390/met9080822 ↗
62. A comparative study of the impact of the stirrer design in the stir casting route to produce metal matrix composites10.1155/2021/4311743 ↗
63. A brief research review for improvement methods the wettability between ceramic reinforcement particulate and aluminium matrix composites10.1088/1757-899X/203/1/012002 ↗
64. Wettability in metal matrix composites10.3390/met11071034 ↗
65. The effect of reinforcement preheating temperatures on tribological behavior of advanced quranic metal-matrix composites (QMMC)10.3390/ma15020659 ↗
66. Review of stir casting technique and technical challenges for ceramic reinforcement particulate and aluminium matrix composites10.14382/epitoanyag-jsbcm.2020.32 ↗
67. Influence of stir casting parameters on particle distribution in metal matrix composites using stir casting process10.1088/2053-1591/ab4045 ↗
68. Measurement and prediction of the thermal and electrical conductivity of Al-Zr overhead line conductors at elevated temperatures10.1590/1980-5373-mr-2018-0513 ↗
69. Experimental investigations into mechanical and thermal properties of rapid manufactured copper parts10.1177/0954406219875483 ↗
70. Integrated unified phase-field modeling (UPFM)10.1002/mgea.44 ↗
71. Enhanced electrical conductivity and mechanical properties in thermally stable fine-grained copper wire10.1038/s43246-021-00150-1 ↗
72. Thermal conductivity of composite materials copper-fullerene soot10.3390/ma15041415 ↗
73. Effect of intermetallic compounds on the thermal and mechanical properties of Al-Cu composite materials fabricated by spark plasma sintering10.3390/ma12091546 ↗
74. AZ31-Mg metal matrix composite in metallurgical and testing approaches10.1177/16878132231184199 ↗
75. RSM and ANN modeling for production of Al 6351/ egg shell reinforced composite: multi objective optimization using genetic algorithm10.1016/j.mtcomm.2019.100674 ↗
76. Application of ANN and RSM for predicting surface roughness in turning Al based MMC with coated carbide insert10.1063/1.5044287 ↗
77. Optimizing wire-cut EDM parameters through evolutionary algorithm: a study for improving cost efficiency in turbo-machinery manufacturing10.1007/s12008-024-02001-y ↗
78. Gunasekaran
79. Alloying effect of copper in AA-7075 aluminum composite using bale out furnace10.1016/j.jmrt.2022.04.054 ↗
80. Optimized mechanical properties of magnesium matrix composites using RSM and ANN10.1016/j.mseb.2023.116303 ↗
81. Applications of artificial neural network simulation for prediction of wear rate and coefficient of friction titanium matrix composites10.1590/1980-5373-mr-2022-0306 ↗
82. Exploring cryo-MQL medium for hard machining of hastelloy C276: a multi-objective optimization approach10.1007/s12008-024-02069-6 ↗
83. Selection of best process parameters for friction stir welded dissimilar Al-Cu alloy: a novel MCDM amalgamated MORSM approach10.1007/s40430-020-02631-9 ↗
84. Mechanical and dry sliding wear behavior of Al7075 alloy-reinforced with SiC particles10.1177/0021998311414948 ↗
85. Application of the extrusion to increase the binding between the ceramic particles and the metal matrix: enhancement of mechanical and tribological properties10.1016/j.jmst.2013.03.016 ↗
86. Effect of Friction stir processing parameters on microstructure and microhardness of aluminium based Metal matrix composites10.1016/j.matpr.2022.03.386 ↗
87. Characterization of centrifugal cast functionally graded aluminum-silicon carbide metal matrix composites10.1016/j.matchar.2010.06.002 ↗
88. RETRACTED: microstructure and mechanical properties of A356/SiC composites fabricated by electromagnetic stir casting10.1016/j.mspro.2014.07.133 ↗
89. Evaluation of effective thermal conductivity of metal matrix composites by using image-based calculation10.4028/www.scientific.net/MSF.941.1939 ↗
90. High-performance advanced composites in multifunctional material design: state of the art, challenges, and future directions10.3390/ma17235997 ↗
91. Recycling of composite materials10.1016/j.cep.2011.09.007 ↗
92. Response surface methodology and machine learning optimisations comparisons of recycled AA6061-B4C–ZrO2 hybrid metal matrix composites via hot forging forming process10.1016/j.heliyon.2024.e33138 ↗
93. Recycling of aluminium matrix composites (AMCs): a review and the way forward10.1007/s40962-022-00905-7 ↗