Advanced process parameter optimization for dimensional accuracy in SS 316L 3D printing using response surface methodology
Source abstract
Abstract
Abstract This study investigates the enhancement of process parameters to produce SS 316L components employing the EOS M 290, 3D printing machine adapting Direct Metal Laser Sintering (DMLS) technique. An extensive examination was performed using grey relational grade and response surface methodology to determine the best configurations for scan speed, laser power, and layer thickness to enhance the dimensional accuracy as well as overall excellence of the printed components. The Global Performance 7.10.7 CNC coordinate measuring machine was used to check how accurate the dimensions were. The study showed that these factors were very important, and the best settings were found to be 332.017 W for the laser power, 834.617 mm sec−1 for the scanning speed, and 75.0673 micrometers for the layer thickness. Contour and overlay plots were used as visualization means to explain the parameter effects and best performance regions. The results highlight the significance to get a proper balance of the energy input and scanning speed in order to be certain of sufficient fusion and cohesion of powder particles while remaining below reasonable construction time limits. The results of this study are significant for improving the quality, accuracy, effectiveness, and reliability of the DMLS process, which will enhance the production of high-quality metal parts in the field of additive manufacturing.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Manufacturing Process and Optimization · Additive Manufacturing and 3D Printing Technologies · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. A review on 3D printing process on metals and their surface roughness and dimensional accuracy10.1016/j.matpr.2022.05.018 ↗
2. Process parameter optimization for laser directed energy deposition (LDED) of Ti6Al4V using single-track experiments with small laser spot size10.1016/j.optlastec.2024.110861 ↗
3. On the effect of small laser spot size on the mechanical behaviour of 316L stainless steel fabricated by L-PBF additive manufacturing10.1016/j.mtcomm.2024.108168 ↗
4. A methodology for optimizing impact strength, dimensional accuracy and costs of manufacturing with three-dimensional printing of polylactic acid10.1007/s13369-023-08422-3 ↗
5. Optimizing SLM process parameters using FE analysis for distortion mitigation10.1177/09544062241245026 ↗
6. Processing challenges and delamination prevention methods in titanium-Steel DED 3D printing10.1007/s40684-024-00598-9 ↗
7. Using Taguchi method and gray relational analysis to enhance manufacturing performance in photopolymerization10.1007/s40964-024-00593-1 ↗
8. Multi-objective robust parameter optimization using the extended and weighted k-means (EWK-means) clustering in laser powder bed fusion (LPBF)10.1016/j.eswa.2023.121349 ↗
9. An analysis of polymer material selection and design optimization to improve structural integrity in 3D printed aerospace components10.59429/ace.v7i2.1875 ↗
10. Process parameter optimization for reproducible fabrication of layer porosity quality of 3D-printed tissue scaffold10.1007/s10845-023-02141-0 ↗
11. Maximizing performance and efficiency in 3D printing of polylactic acid biomaterials: unveiling of microstructural morphology, and implications of process parameters and modeling of the mechanical strength, surface roughness, print time, and print energy for fused filament fabricated (FFF) bioparts10.1016/j.ijbiomac.2024.129201 ↗
12. Multiobjective optimization of tribological characteristics of 3D printed texture surfaces for ABS and PLA polymers10.1177/08927057231185710 ↗
13. Optimization of functional performance of additively manufactured cobalt-chromium-molybdenum alloy for dental implant applications10.1016/j.jmapro.2024.05.005 ↗
14. Experimental study on the effect of process parameters on the build time and part accuracy of direct metal laser sintering components10.4028/p-fzsqM6 ↗
15. Physics constrained multi-objective bayesian optimization to accelerate 3D printing of thermoplastics10.1016/j.addma.2024.104204 ↗
16. Deep learning-enabled design for tailored mechanical properties of SLM-manufactured metallic lattice structures10.1016/j.engappai.2023.107685 ↗
17. Optimization of process parameters of selective laser melted nickel-based superalloy for densification by random forest regression algorithm and response surface methodology10.1016/j.rineng.2024.102182 ↗
18. A comprehensive review on the effect of thermal post processing on DMLS processed SS 316L components10.4028/p-oqdEq5 ↗
19. A state-of-the-art review on metal additive manufacturing: milestones, trends, challenges and perspectives10.1007/s40430-024-04917-8 ↗
20. Dimensional accuracy testing and analysis of 3D metal printed SS 316l using DMLS technique10.1007/s12008-024-01824-z ↗
21. Metal powder as feedstock for laser-based additive manufacturing: From production to powder modification10.1557/s43578-023-01271-8 ↗
22. Hot isostatic pressing as an alternative thermo-mechanical treatment for metallic full-arch implant-supported frameworks obtained by additive and subtractive manufacturing technology: Vertical and horizontal fit, screw removal torque, and stress analysis10.1111/jopr.13842 ↗
23. Experimental investigation into the dry reciprocating wear behavior of additively manufactured austenitic stainless steel (316L) alloys10.1007/s11837-024-06491-9 ↗
24. Metal additive manufacturing (MAM) applications in production of vehicle parts and components—a review10.3390/met14020195 ↗
25. Advancements in micromachining of additive manufactured materials: a comprehensive review10.1080/10426914.2024.2362621 ↗
26. Additive Manufacturing: a comprehensive review10.3390/s24092668 ↗
27. An experimental investigation on surface quality of 3D metal printed SS 316L by direct metal laser sintering technique10.1007/s12008-024-01801-6 ↗
28. Optimizing sustainable machining for magnesium alloys: a comparative study of GRA and TOPSIS10.1080/23311916.2024.2308986 ↗
29. A review on fused deposition modeling printing parameters optimization for maximizing the mechanical properties10.1063/5.0125183 ↗
30. Optimization of density and surface morphology of SS 316L/IN718 functionally graded thin-walled structures using hybrid prediction-multi-objective optimization method10.1016/j.jmapro.2024.04.044 ↗
31. Response Surface Methodology (RSM) Approach for Optimizing the Processing Parameters of 316L SS in Directed Energy Deposition10.3390/ma16237253 ↗
32. The influence of laser directed energy deposition (DED) processing parameters for Al5083 studied by central composite design10.1016/j.jmrt.2022.02.042 ↗
33. Experimental investigation and optimization of printing parameters of 3D printed polyphenylene sulfide through response surface methodology10.1002/app.49625 ↗
34. Optimization of porosity and surface roughness of CMT-P wire arc additive manufacturing of AA2024 using response surface methodology and NSGA-II10.1016/j.jmrt.2023.04.259 ↗
35. Sinterability of SS 316, SiC, and TiN multi-material additive manufacturing via selective laser sintering10.1016/j.optlastec.2023.109686 ↗
36. A critical review on effect of process parameters on mechanical and microstructural properties of powder-bed fusion additive manufacturing of ss316l10.3390/ma14216527 ↗
37. Effect of heat-treatment on the microstructure, mechanical properties and corrosion behaviour of SS 316 structures built by laser directed energy deposition based additive manufacturing10.1007/s12540-020-00838-y ↗
38. Microstructure and mechanical behaviour of 316L stainless steel produced using sinter-based extrusion additive manufacturing10.1007/s10853-021-06828-8 ↗
39. Comparative study of mechanical and tribological behavior of additively manufactured and wrought alloy of SS 316L10.1007/s11665-025-10631-w ↗
40. Optimization of process parameters of direct metal laser sintering process using fuzzy-based desirability function approach10.1007/s40430-019-1621-2 ↗
41. Investigation of surface properties for additively manufactured SS 316L parts: effect of post-processing techniques10.1016/j.matpr.2022.10.187 ↗
42. Effect of laser sintering parameters on the microstructure, mechanical properties and corrosion behavior of titanium grade 5 alloy10.1007/s11665-024-09935-0 ↗