Effect of zirconium and niobium on the microstructure and mechanical properties of high-strength low-alloy cast steels
Source abstract
Abstract
Abstract The aim of this work is to study the effect of zirconium and niobium on the refinement of grain size and mechanical properties of micro-alloyed cast steels in heat treated conditions. Five micro-alloyed cast steels with different compositions, as steel without microalloying elements and micro-alloyed steel with (i) 0.05% Zirconium (Zr), (ii) 0.05% Zirconium (Zr) and 0.05% Niobium (Nb), (iii) 0.10% Zirconium (Zr), and (iv) 0.10% Zirconium (Zr) and 0.10% Niobium (Nb) were investigated. The heat treated samples are normalized at 1000 °C followed by air cooling and were characterized to study the characteristics of carbide precipitates by SEM and TEM and mechanical properties were evaluated by tensile test as per ASTM A370. Among these five cast steels, steel containing 0.10% Zr and 0.10% Nb showed a higher tensile strength of 1184 MPa and yield strength of 740 MPa with reasonable impact energy of 42 J compared to other steels under the same heat treated conditions. Due to the combined addition of Zr and Nb elements in the micro-alloyed steel, a remarkable improvement of mechanical properties particularly strength and impact energy was observed. As evident from microstructure investigation, these improved mechanical properties in the present steel could be attributed due to the effective refinement of ferritic grain size in the normalized condition.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Influence of Nb, V and Ti on peak strain of deformed austenite in Mo-based micro-alloyed steels10.1016/S0924-0136(02)00287-X ↗
2. The effect of Ni addition on microstructure and mechanical properties of cast A356 alloy modified with Sr10.4149/km_2021_6_391 ↗
3. Effects of Ti addition and reheating quenching on grain refinement and mechanical properties in low carbon medium manganese martensitic steel10.1016/j.matdes.2008.08.024 ↗
4. On the microstructural and mechanical characterizations of a low carbon and micro-alloyed steel10.1016/j.matdes.2009.01.017 ↗
5. The development of Ti-alloyed high strength microalloy steel10.1016/j.matdes.2009.12.032 ↗
6. Optimization of micro-alloying elements for mechanical properties in normalized cast steel using taguchi technique10.1515/afe-2017-0070 ↗
7. Development of new microalloyed steel by alloying with tungsten10.4028/www.scientific.net/AMM.716-717.48 ↗
8. Zhang · Mater. Sci. Eng. · 2018 · 738 · 20310.1016/j.msea.2018.09.102 ↗
9. Effect of precipitation of (Ti, V) N and V (C, N) secondary phases on mechanical properties of V and N microalloyed 1Cr steels10.1007/s12540-018-0154-z ↗
10. Microstructural effects on high-cycle fatigue properties of microalloyed medium carbon steel 38MnVS10.1016/j.msea.2015.05.054 ↗
11. Effects of vanadium and titanium on mechanical properties of low carbon as cast microalloyed steels10.1179/136404606X163505 ↗
12. Mechanical properties of as cast microalloyed steels containing V, Nb and Ti10.1179/174328407X179755 ↗
13. Study of cast microalloyed steels10.1179/026708303225008644 ↗
14. Zr-containing precipitates in a TiNbmicroalloyed HSLA steel containing 0.016 wt.%Zr addition10.1016/0921-5093(96)10267-7 ↗
15. Effects of rare Earth metals on steel microstructures10.3390/ma9060417 ↗
16. Influence of compound deoxidation of steel with Al, Zr, rare Earth metals, and Ti on properties of heavy castings10.2478/v10266-012-0019-8 ↗
17. Effect of Nb on microstructure and yield strength of a high temperature tempered martensitic steel10.1088/2053-1591/aab831 ↗
18. A review of research and development on titanium microalloyed high strength steels10.1088/2053-1591/aacb61 ↗
19. A micro-alloyed ferritic steel strengthened by nanoscale precipitates10.1016/j.msea.2011.07.065 ↗
20. The potential significance of microalloying with niobium in governing very high cycle fatigue behavior of bainite/martensite multiphase steels10.1016/j.msea.2015.10.044 ↗
21. Study of combined effect of zirconium and titanium on microstructure and mechanical properties of micro-alloyed cast steels10.1088/2053-1591/ab3eeb ↗
22. Xie · Mater. Sci. Eng. · 2015 · 641 · 3710.1016/j.msea.2015.05.101 ↗
23. Nano-sized precipitation and properties of a low carbon niobium micro-alloyed bainitic steel10.1016/j.msea.2007.08.057 ↗
24. Effect of prior austenite grain size on impact toughness of press hardened steel10.4271/2016-01-0359 ↗
25. Influence of molybdenum addition on mechanical properties of low carbon HSLA-100 steel10.2478/amm-2014-0145 ↗
26. The mechanisms for strengthening under dynamic loading for low carbon and microalloyed steel10.1016/j.ijimpeng.2017.12.015 ↗
27. Effect of normalizing temperature on microstructure and mechanical properties of a Nb-V microalloyed large forging steel10.1016/j.msea.2016.06.059 ↗
28. Precipitation behavior of VN microalloyed steels during normalizing10.1016/S1006-706X(15)30109-6 ↗
29. Enhancing mechanical properties of a low-carbon microalloyed cast steel by controlled heat treatment10.1016/j.msea.2012.08.122 ↗
30. Strain-induced austenitic structure in microalloyed steels10.2478/amm-2013-0064 ↗
31. Effects of niobium and heat treatment on microstructure and mechanical properties of low carbon cast steels10.1016/j.matdes.2016.05.057 ↗
32. Effects of titanium addition on precipitate and microstructural control in C-Mnmicroalloyed steels10.2355/isijinternational.42.1520 ↗
33. TEM and HRTEM study of oxide particles in an Al-alloyed high-Cr oxide dispersion strengthened steel with Zr addition10.1016/j.jnucmat.2013.10.028 ↗