journal article·2023-07-01Open access

Research on influence of grain boundaries on the mechanical properties of 460 MPa refractory steel used for high-strength building structures

Hong-Yu Wu, Jing-Hua Cong, Qi Liu, Jing-Xiao Zhao, Zhi-Quan Wang, Xue-Min Wang, Peng-Cheng Liu

Materials Research Express· Volume 10· Issue 7

Abstract

Abstract In this paper, the microstructure of Mo-type seismic refractory steel for building g, as well as different boundary densities and boundary ratios, are combined with elevated-temperature mechanical properties analysis to explore the laws of boundary for high-temperature performance. The results show that salt water cooling (SWC) and water cooling (WC) can obtain lath bainite with a higher content, and oil cooling (OC) with a lower cooling rate can obtain the microstructure of multiphase bainite + bulk ferrite. The boundary characterization results show that when the sample contains more high angle grain boundaries (Block and High-Packet boundaries), and the dislocation density is high, it can make it have better mechanical properties at room temperature. When the content of low angle boundary and low interfacial energy twin boundary (Σ3 boundary, which is mainly composed of V1/V2 variant pair) is high, it will have better microstructure stability after high temperature tempering, and the boundary density and dislocation density will decrease slightly, ensuring that it has better refractory performance.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Development and study of high-strength low-Mo fire-resistant steel10.1016/j.matdes.2011.10.055 ↗
2. Study on microstructure and properties of low-Mo fire-resistant steel10.4028/www.scientific.net/AMR.168-170.1792 ↗
3. The behaviour of structural steels at elevated temperatures and the design of fire resistant steels10.2320/matertrans.42.1913 ↗
4. Development of a fire resistant low alloy steel for construction10.4028/www.scientific.net/AMR.535-537.1973 ↗
5. Development and practical application of fire-resistant steel for buildings
6. New insights into the mechanism of cooling rate on the impact toughness of coarse grained heat affected zone from the aspect of variant selection10.1016/j.msea.2017.07.095 ↗
7. Relationship between high angle grain boundaries and hardness after γ→α transformation10.1080/02670836.2019.1647936 ↗
8. Measurement of bainite packet size and its influence on cleavage fracture in a medium carbon bainitic steel10.1016/j.msea.2011.09.001 ↗
9. Effect of block size on the strength of lath martensite in low carbon steels10.1016/j.msea.2005.12.048 ↗
10. Block and sub-block boundary strengthening in lath martensite10.1016/j.scriptamat.2016.01.043 ↗
11. Micro-tension behaviour of lath martensite structures of carbon steel10.1016/j.msea.2012.09.099 ↗
12. Wang · 2015
13. The morphology and crystallography of lath martensite in Fe-C alloys10.1016/S1359-6454(02)00577-3 ↗
14. Effects of transformation temperature on variant pairing of bainitic ferrite in low carbon steel10.1016/j.actamat.2011.12.018 ↗
15. Austenite to bainite phase transformation in the heat-affected zone of a high strength low alloy steel10.1016/j.actamat.2004.01.025 ↗
16. Gottstein · 2011
17. Tracking the sliding of grain boundaries at the atomic scale10.1126/science.abm2612 ↗
18. Effect of microstructures on the mechanical behavior of fire-resistant dual-phase steels at elevated temperature10.1002/srin.202100006 ↗
19. Modeling of precipitation hardening during coiling of Nb–Mo steels10.3390/met8100758 ↗
20. Dislocation-precipitate interaction and its effect on thermostability of bainite in a Nb-bearing steel10.4028/www.scientific.net/MSF.475-479.125 ↗
21. Elastic moduli and internal friction of low carbon and stainless steels as a function of temperature10.2355/isijinternational.33.508 ↗
22. Dislocation densities in some annealed and cold-worked metals from measurements on the x-ray debye–scherrer spectr.um10.1080/14786435608238074 ↗
23. Cyclic deformation behavior and microstructural changes of 12Cr–WMoV martensitic stainless steel at elevated temperature
24. Microstructural degeneration of simulated heat-affected zone in 2.25Cr-1Mo steel during high-temperature exposure10.1016/S0921-5093(02)00081-3 ↗
25. Effect of tempering temperature on strength and toughness in Mn-B bainitic steels containing higher silicon contents10.1016/j.msea.2017.01.044 ↗
26. Evolution and thermal stability of bainite structure in low carbon steel during reheating below A1 temperature
27. Melting as a dislocation-mediated phase transition10.1103/PhysRevB.61.15011 ↗
28. Melting at grain boundaries and surfeces10.1103/PhysRevLett.57.2876 ↗