journal article·2023-10-01Open access

Developing a Zn alloy with high strength and uniform elongation as a biomedical device

Hao Chen, Yi Xiao, Wucheng Lu, Houlin Ji, Yang Yang, Bowei Liang, Xu Cui

Materials Research Express· Volume 10· Issue 10

Abstract

Abstract The equal channel angular pressing (ECAP) process was used to develop a Zn-1Mg alloy with a tensile strength of 440 MPa and uniform elongation of 11%. The uniform elongation of the ECAPed Zn-1Mg alloy is higher than that of other Zn alloys with strengths over 400 MPa. The microstructure of the ECAPed Zn-1Mg alloy evolved through dynamic recrystallization (DRX), resulting in a refined grain structure. Additionally, the lamellar eutectic structure was fragmented into sub-micrometer particles (∼0.9 μm). The high strength of the Zn-1Mg alloy is due to both grain boundary strengthening and second phase strengthening. The high uniform elongation is attributed to the presence of plate-shaped precipitates with a high density of 1014m−2. The in-vitro results indicate that ECAPed Zn-1Mg alloy has high cell viability (>100%). Meanwhile, the Zn-1Mg alloy processed by ECAP exhibited better ALP activity and alizarin red results than pure Zn. These results demonstrate that Zn-1Mg alloy is beneficial to the proliferation and differentiation of osteoblasts, and also promote blood vascular formation. The good osteogenic and angiogenic properties of the alloy are attributed to the release of Mg2+ and Zn2+ during the degradation process, which play a critical role in biochemical reactions in the human body. Therefore, the high uniform elongation and good biological properties make Zn-Mg based alloys a promising material for expanding applications in the orthopedic field.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Microstructure and mechanical properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Liu · Fundamental Theory of Biodegradable Metals—Definition, Criteria, and Design. Advanced Functional Materials · 2019 · 29 · 18
2. Zinc exhibits ideal physiological corrosion behavior for bioabsorbable stents10.1002/adma.201300226 ↗
3. Evolution of the degradation mechanism of pure zinc stent in the one-year study of rabbit abdominal aorta model10.1016/j.biomaterials.2017.08.022 ↗
4. Biodegradable ZnLiCa ternary alloys for critical-sized bone defect regeneration at load-bearing sites: In vitro and in vivo studies10.1016/j.bioactmat.2021.03.045 ↗
5. Zn0.8Li0.1Sr-a biodegradable metal with high mechanical strength comparable to pure Ti for the treatment of osteoporotic bone fractures: In vitro and in vivo studies10.1016/j.biomaterials.2021.120905 ↗
6. Zn-0.4Li alloy shows great potential for the fixation and healing of bone fractures at load-bearing sites10.1016/j.cej.2021.129317 ↗
7. Development of a high-strength Zn-Mn-Mg alloy for ligament reconstruction fixation10.1016/j.actbio.2020.10.032 ↗
8. High-strength biodegradable zinc alloy implants with antibacterial and osteogenic properties for the treatment of MRSA-induced rat osteomyelitis
9. Design biodegradable Zn alloys: second phases and their significant influences on alloy properties10.1016/j.bioactmat.2020.02.010 ↗
10. Structural and mechanical aspects of hypoeutectic Zn-Mg binary alloys for biodegradable vascular stent applications10.1016/j.bioactmat.2020.07.004 ↗
11. Effect of ECAP temperature on formation of triple heterogeneous microstructure and mechanical properties of Zn–1Cu alloy
12. Extra strengthening and work hardening in gradient nanotwinned metals10.1126/science.aau1925 ↗
13. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility10.1073/pnas.1517193112 ↗
14. Bifunctional nanoprecipitates strengthen and ductilize a medium-entropy alloy10.1038/s41586-021-03607-y ↗
15. Strain hardening mediated by coherent nanoprecipitates in ultrahigh-strength steels
16. Ductility and plasticity of nanostructured metals: differences and issues10.1016/j.mtnano.2018.09.004 ↗
17. Evolution of Mg–Zn second phases during ECAP at different processing temperatures and its impact on mechanical properties of Zn-1.6Mg (wt%) alloys
18. A high-strength and biodegradable Zn–Mg alloy with refined ternary eutectic structure processed by ECAP10.1007/s40195-020-01027-x ↗
19. Processing optimization, mechanical properties, corrosion behavior and cytocompatibility of additively manufactured Zn-0.7Li biodegradable metals10.1016/j.actbio.2022.01.049 ↗
20. Multi-interactions of dislocations and refined microstructure in a high strength and toughness Zn-Mg-Mn alloy10.1016/j.jmrt.2020.09.126 ↗
21. Revealing the effect of minor Ca and Sr additions on microstructure evolution and mechanical properties of Zn-0.6 Mg alloy during multi-pass equal channel angular pressing
22. Revealing the influence of Zr micro-alloying and hot extrusion on a novel high ductility Zn–1Mg alloy
23. In vivo biocompatibility evaluation of Zn-0.05Mg-(0, 0.5, 1wt%)Ag implants in New Zealand rabbits
24. Development of biodegradable Zn-1Mg-0.1RE (RE = Er, Dy, and Ho) alloys for biomedical applications10.1016/j.actbio.2020.09.036 ↗
25. Impact of gadolinium on mechanical properties, corrosion resistance, and biocompatibility of Zn-1Mg-xGd alloys for biodegradable bone-implant applications10.1016/j.actbio.2022.02.015 ↗
26. Morphology and mechanical, corrosive, and antibacterial behaviors of indirectly extruded Zn-0.05wt%Mg-(0.5, 1 wt%)Ag alloys10.1007/s11665-019-04297-4 ↗
27. The effects of alloying with Cu and Mn and thermal treatments on the mechanical instability of Zn-0.05Mg alloy
28. Structural evolutions of metallic materials processed by severe plastic deformation10.1016/j.mser.2018.06.001 ↗
29. A new approach to plastic deformation of biodegradable zinc alloy with magnesium and its effect on microstructure and mechanical properties10.1016/j.matlet.2017.09.090 ↗
30. Effect of cumulative strain on the microstructural and mechanical properties of Zn-0.02 wt%Mg alloy wires during room-temperature drawing process10.1016/j.jallcom.2018.01.059 ↗
31. Microstructure, mechanical properties and fracture behavior of as-extruded Zn–Mg binary alloys10.1007/s40195-017-0585-4 ↗
32. What governs ductility of ultrafine-grained metals? A microstructure based approach to necking instability10.1016/j.actamat.2017.08.069 ↗
33. Dislocation annihilation in plastic deformation: I. Multiscale irreversible thermodynamics10.1016/j.actamat.2012.01.027 ↗
34. Dislocation annihilation in plastic deformation: II. Kocks–mecking analysis10.1016/j.actamat.2012.01.028 ↗
35. Improved mechanical properties and strengthening mechanism with the altered precipitate orientation in magnesium alloys10.1016/j.jma.2020.09.028 ↗
36. Characterization of nano precipitate phase in an as-extruded Zn-Cu alloy
37. Biodegradable Zn-1.5Cu-1.5Ag alloy with anti-aging ability and strain hardening behavior for cardiovascular stents10.1016/j.msec.2020.111172 ↗
38. High-performance hot-warm rolled Zn-0.8Li alloy with nano-sized metastable precipitates and sub-micron grains for biodegradable stents10.1016/j.jmst.2019.06.009 ↗
39. Twinning in MnZn13 intermetallic compound with base-centered monoclinic structure in Zn-0.75Mn alloy10.1016/j.matchar.2018.01.021 ↗
40. Fine-tuning of mechanical properties in a Zn-Ag-Mg alloy via cold plastic deformation process and post-deformation annealing10.1016/j.bioactmat.2021.03.017 ↗
41. Implant-derived magnesium induces local neuronal production of CGRP to improve bone-fracture healing in rats10.1038/nm.4162 ↗
42. In vivo study of the efficacy, biosafety, and degradation of a zinc alloy osteosynthesis system10.1016/j.actbio.2019.05.001 ↗
43. Long-term in vivo study of biodegradable Zn-Cu stent: A 2-year implantation evaluation in porcine coronary artery10.1016/j.actbio.2019.08.012 ↗