Experimental investigation on trinary blended geopolymer mortar synthesized from Industrial-agro and municipal solid waste ash subjected to different acid exposure
Source abstract
Abstract
Abstract Geopolymer binders prove to be a reliable option to avoid dependency on conventional binders, and reduce the burden on the environment. The current study assesses the durability characteristics of a developed mortar made from a combination of Granulated blast furnace slag (GBFS), Sugar cane bagasse ash (SCBA), and Municipal solid waste ash (MSWA). The Geopolymer mortar specimens were cured under ambient conditions after the ternary blended mix had been activated by a solution of sodium silicate and sodium hydroxide of 8 M (SS/SH-2.5). Mass loss and compressive strength were measured at various time regimes of acid attack studies under mild concentrations of 3% sulphuric acid, hydrochloric acid, and nitric acid. The durability, macroscopic, microscopic, and morphological, studies were carried out. The results indicated that trinary blended geopolymer mortar exposed to sulphuric acid showed less mass loss and high compressive strength retention compared to the control mortar. The nitric acid exposure exhibited comparable strength loss for the trinary blend with control mortar and hydrochloric acid showed negligible effect on mortar. Mass loss was more significant in sulfuric acid than the hydrochloric and nitric acid. RCPT and Carbonation tests revealed that geopolymer mortar exhibits moderate chlorine ion penetration and the ingress of CO2 was less in the trinary blend mix. The mineralogical studies showed the formation of gypsum, nitrate, and chloride products. The optical microscopic image revealed the ingress of sulfuric acid is more intense in the mortar compared to hydrochloric and nitric acid and microstructural studies witnessed the degradation of C-A-S-H supported by EDX.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. Toward electrochemical synthesis of cement—an electrolyzer based process for decarbonating CaCO3 while producing useful gas streams10.1073/pnas.1821673116 ↗
2. Low calcium fly ash based geopolymer concrete
3. A novel approach for the development of sustainable hybridized geopolymer mortar from waste printed circuit boards10.1016/j.resconrec.2020.105066 ↗
4. Geopolymerization reaction to consolidate incoherent pozzolanic soil10.1007/s10853-007-2201-x ↗
5. Performance evaluation of sugarcane bagasse ash blended cement in concrete10.1016/j.cemconcomp.2015.03.004 ↗
6. Experimental and machine learning approaches to investigate the application of sugarcane bagasse ash as a partial replacement of fine aggregate for concrete production10.1016/j.jobe.2023.107168 ↗
7. Influence of pyrolysis conditions on the structure and gasification reactivity of biomass chars10.1016/j.fuel.2004.05.008 ↗
8. Effects of adding sugarcane bagasse ash on the properties and durability of concrete10.1016/j.fuel.2004.05.008 ↗
9. Construction products with sugarcane bagasse ash binder10.1061/(ASCE)MT.1943-5533.0001999 ↗
10. Synthesis a nd characterization of geopolymer from metakaolin and sugarcane bagasse ash10.1016/j.conbuildmat.2020.119231 ↗
11. A novel approach for the synthesis of ecofriendly geopolymer ternary blended mortar with GGBS, sugarcane bagasse ash, and sewage sludge ash under ambient curing conditions10.1007/s12205-023-1842-x ↗
12. Thermochemicomechanical activation of bagasse ash to develop geopolymer based cold pressed block10.1016/j.conbuildmat.2022.129053 ↗
13. Geopolymer synthetized from sludge residue pretreated by the wet alkalinizing method: compressive strength and immobilization efficiency of heavy metal10.1016/j.conbuildmat.2018.03.068 ↗
14. Estimation of energy recovery potential of sewage sludge in India: waste to watt approach10.1016/j.jclepro.2020.122538 ↗
15. Chemical effect of sewage sludge ash on early-age hydration of cement used as supplementary cementitious material10.1016/j.conbuildmat.2021.126116 ↗
16. The effectiveness of the incineration of sewage sludge on the evolution of physicochemical and mechanical properties of Portland cement10.1016/j.conbuildmat.2016.02.121 ↗
17. Comparative studies on the effects of sewage sludge ash and fly ash on cement hydration and properties of cement mortars10.1016/j.conbuildmat.2017.08.003 ↗
18. Geopolymer concrete: a review of some recent developments10.1016/j.conbuildmat.2017.08.003 ↗
19. Fresh properties and sulfuric acid resistance of sustainable mortar using alkaliactivated GGBS/fly ash binder10.3390/polym14030591 ↗
20. Durability of alkali activated fly ash cementitious materials10.1007/s10853-006-0584-8 ↗
21. Durability of concrete containing fly ash and silica fume against combined freezing thawing and sulfate attack10.1016/j.conbuildmat.2017.04.172 ↗
22. Chloride ingress and steel corrosion in geopolymer concrete based on long term tests10.1016/j.matdes.2016.12.030 ↗
23. Mechanical evaluation of self-healed cementitious material
24. Corrosion investigation of fly ash based geopolymer mortar in natural sewer environment and sulfuric acid solution10.1016/j.corsci.2020.108586 ↗
25. Implementation of artificial neural networks for prediction of chloride penetration in concrete10.14419/ijet.v7i2.28.12880 ↗
26. A review of the engineering properties of metakaolin based concrete: towards combatting chloride attack in coastal/marine structures10.1155/2020/8880974 ↗
27. Surface neutralization and H2S oxidation at early stages of sewer corrosion: influence of temperature, relative humidity and H2S concentration10.1155/2020/8880974 ↗
28. A comprehensive overview about the influence of different admixtures and additives on the properties of alkali activated fly ash10.1016/j.matdes.2013.07.074 ↗
29. Investigation on effect of precursor materials and sand to binder ratio on strength development, acid resistance and microstructure evolution of geopolymer mortar10.1016/j.conbuildmat.2022.128501 ↗
30. Effect of relative GGBS/fly contents and alkaline solution concentration on compressive strength development of geopolymer mortars subjected to sulfuric acid10.1038/s41598-022-09682-z ↗
31. Sustainable use of waste glass in alkali activated materials against H2SO4 and HCl acid attacks10.1016/j.clet.2021.100354 ↗
32. Resistance to sulfuric acid corrosion of geopolymer concrete based on different binding materials and alkali concentrations10.3390/ma14237109 ↗
33. Novel acid based geopolymer synthesized from nanosized tubular halloysite: the role of precalcination temperature and phosphoric acid concentration10.1016/j.cemconcomp.2020.103601 ↗
34. Durability performance of geopolymer cement based on fly ash and calcium aluminate cement in mild concentration acid solutions10.1080/21650373.2019.1615568 ↗
35. Sulfuric acid resistance of one-part alkali activated mortars10.1016/j.cemconres.2018.04.009 ↗
36. Sulfate resistance of ferrochrome slag based geopolymer concrete10.1016/j.ceramint.2015.09.058 ↗
37. Geopolymer as underwater concreting material: a review10.1016/j.conbuildmat.2021.123276 ↗
38. The effect of pore behavior and gel structure on the mechanical property at different initial water content10.1016/j.conbuildmat.2021.125146 ↗
39. Effects of aggregate types on acid corrosion attack upon fly–Ash geopolymer and Portland cement concretes–comparative study10.1016/j.conbuildmat.2021.125468 ↗
40. Geopolymeric materials prepared using Class F fly ash and elevated temperature curing10.1016/j.cemconres.2004.06.031 ↗
41. Sulfuric acid resistance of blended ash geopolymer concrete10.1016/j.conbuildmat.2013.01.018 ↗
42. The resistance of blast furnace slag and ferrochrome slag based geopolymer concrete against acid attack10.1007/s40999-019-00425-2 ↗
43. Effects of calcium aluminate cement on the acid resistance of metakaolin based geopolymer10.1680/jadcr.20.00049 ↗
44. Effects of POFA replaced with FA on durability properties of GBFS included alkali activated mortars10.1016/j.conbuildmat.2018.04.166 ↗
45. Standard specification for coal fly ash and raw or calcined natural pozzolan for use10.1520/C0618-22 ↗
46. Characterization of fly ash and ground granulated blast slag for soil stabilization application using geopolymerization method10.1088/1757-899X/864/1/012013 ↗
47. Compressive strength and microstructural properties of dry mixed geopolymer pastes synthesized from GGBS and sewage sludge ash10.1016/j.conbuildmat.2018.06.159 ↗
48. Enhancement experiment on cementitious activity of coppermine tailings in a geopolymer system10.3390/fib5040047 ↗
49. An overview of the influences of mechanical and chemical processing on sugarcane bagasse ash characterization as a supplementary cementitious material10.1016/j.jclepro.2019.118854 ↗
50. Standard test methods for sampling and testing fly ash or natural pozzolans for use in portland-cement concrete10.1520/C0311-04 ↗
51. Standard test method for compressive strength of hydraulic cement mortars (Using 2-in. or cube specimens)10.1520/C0109_C0109M-16A ↗
52. Standard test methods for chemical resistance of mortars, grouts, and monolithic surfacing and polymer concretes10.1520/C0267-20 ↗
53. Acidic corrosion of hydrated cement-based materials. Part 1: mechanism of the phenomenon
54. High strength geopolymer binder based on waster glass powder10.1016/j.apt.2016.09.034 ↗
55. Acid attack on geopolymer cement mortar based on waster glass powder and calcium aluminate cement at mild concentration10.1016/j.conbuildmat.2018.10.203 ↗
56. Performance of alkali-activated slag mortars exposed to acids10.1080/21650373.2012.747235 ↗
57. Effect of partial replacement of ground granulated blast furnace slag with sugarcane bagasse ash as source material in the production of geopolymer concrete10.5755/j01.ms.26.4.23602 ↗
58. The role of open and closed curing conditions on the leaching properties of fly ash slagbased geopolymers10.1016/j.jhazmat.2009.11.075 ↗
59. Improvement of acid resistance of calcium silicate hydrate by thermal treatment’10.1016/j.cemconres.2003.09.010 ↗
60. The resistance of alkali activated cement-based binders to chemical attack Handb. Alkali Activated Cem10.1533/9781782422884.3.373 ↗
61. Hydration of bagasse ash blended Portland cement10.1016/S0008-8846(00)00324-0 ↗
62. Strength and durability in acid media of alkali silicate-activated metakaolin geopolymers10.1111/j.1551-2916.2012.05249.x ↗
63. Sulfuric acid attack on hardened paste of geopolymer cement’s part 2. Corrosion mechanism at mild and relatively low concentrations
64. Standard test method for electrical indication of Concrete’s ability to resist chloride ion penetration10.1520/C1202-19 ↗
65. Geopolymer based on mechanically activated air-cooled blast furnace slag10.3390/ma13051134 ↗
66. Novel biochar concrete composites: Manufacturing, characterization and evaluation of the mechanical properties10.1016/j.scitotenv.2017.10.319 ↗
67. Monkman · 2018 · 1
68. Durability of alumina silicate concrete based on slag/fly ash blends against10.1108/ECAM-08-2018-0345 ↗
69. Geopolymer concrete incorporating agro industrial wastes: effects on mechanical properties, microstructural behaviour and mineralogical phases10.1016/j.conbuildmat.2020.119390 ↗
70. Long term durability properties of class F fly ash geopolymer concrete10.1617/s11527-014-0268-9 ↗
71. Utilization of palm oil fuel ash in high strength concrete10.1061/(ASCE)0899-1561(2004)16:6(623) ↗
72. Sulfuric acid resistance of alkali/slag activated silico-manganese fume-based mortars10.1002/suco.201900543 ↗
73. Influence of natural pozzolan, silica fume and limestone fine on strength, acid resistance and microstructure of mortar10.1016/j.powtec.2014.01.046 ↗
74. Resistance of self-consolidating concrete to sulfuric acid attack with consecutive pH reduction10.1016/j.cemconres.2007.04.014 ↗
75. Effect of aggressive chemicals on durability and microstructure properties of concrete containing crushed new concrete aggregate and nontraditional supplementary cementitious materials10.1016/j.conbuildmat.2017.12.106 ↗
76. Cost efficiency and resistance to chemical attack of a fly ash geopolymeric mortar versus epoxy resin and acrylic paint coatings10.1080/19648189.2015.1134674 ↗
77. Provis · 2009
78. Chukanov · 201610.1007/978-3-319-25349-7_2 ↗
79. POFA engineered alkaliactivated cementitious composite performance in acid environment10.3151/jact.15.684 ↗