Comparative study of cell interaction and bacterial adhesion on titanium of different composition, structure and surfaces with various laser treatment
Source abstract
Abstract
Abstract Titanium and its alloys are commonly used in modern implantology. Cell viability on the surface of titanium implants depends on the surface topography, roughness, and wettability. Laser treatment is a successful method to control the surface morphology. The aim of this study was to comprehensively investigate the effects of laser ablation on titanium surfaces and their interactions with cells and bacteria. Cell adhesion, proliferation, and bacterial retention on smooth and laser-textured samples of commercially pure and nanostructured titanium of two grades were evaluated. Femtosecond laser treatment effectively enhances the wettability. Titanium grade four exhibits superior adhesion and proliferation rates when compared to titanium grade two. The cytotoxicity of nanostructured titanium is significantly lower, regardless of the surface treatment. Laser treatment resulted in increased short-term cell proliferation on grade two titanium and long-term cell proliferation on nanostructured grade two titanium only. Although the laser ablation has a limited effect on bacterial adhesion, the coverage of less than 1% in most samples indicates that the material itself has an antibacterial effect on the bacterial strain Streptococcus oralis. These findings provide valuable insights into how different material structures and surface treatments can affect cellular response and antibacterial properties for potential use in dental implantology.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Laser Applications in Dentistry and Medicine · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Surface activation and pretreatments for biocompatible metals and alloys used in biomedical applications10.1155/2019/3806504 ↗
2. Electrical impedance of surface modified porous titanium implants with femtosecond laser10.3390/ma15020461 ↗
3. Brånemark · 2005
4. Intra-osseous anchorage of dental prostheses. I. Experimental studies10.3109/02844316909036699 ↗
5. In vitro evaluation of cytotoxicity and genotoxicity of a commercial titanium alloy for dental implantology10.1016/j.mrgentox.2010.06.013 ↗
6. On the mechanisms of biocompatibility10.1016/j.biomaterials.2008.04.023 ↗
7. Influence of oxidation processing temperature on the structure, mechanical and tribological properties of titanium using carbon sheets10.3390/met11040585 ↗
8. High-strength state and strengthening mechanisms of ultrafine-grained titanium10.1134/S1029959923050016 ↗
9. Residual stress, fatigue behavior, and mechanical properties of equal-channel angular pressed commercial pure titanium10.1016/j.jmrt.2023.12.265 ↗
10. Plastic deformation of alloys with submicron-grained structure10.1016/0921-5093(91)90316-F ↗
11. Commercial purity titanium processed by rotary-die equal channel angular pressing method10.2320/matertrans.46.2098 ↗
12. Nanomaterials in bone regeneration10.3390/app12136793 ↗
13. The effects of combined micron-/submicron-scale surface roughness and nanoscale features on cell proliferation and differentiation10.1016/j.biomaterials.2011.01.029 ↗
14. On osseointegration in relation to implant surfaces10.1111/cid.12742 ↗
15. Chemical etching of Ti-6Al-4V biomaterials fabricated by selective laser melting enhances mesenchymal stromal cell mineralization10.1002/jbm.a.37709 ↗
16. The optimized preparation of HA/L-TiO2/D-TiO2 composite coating on porous titanium and its effect on the behavior osteoblasts10.1093/rb/rbaa013 ↗
17. Functionalized coatings by cold spray: an in vitro study of micro- and nanocrystalline hydroxyapatite compared to porous titanium10.1016/j.msec.2018.02.009 ↗
18. Tailoring the synthesis of tantalum-based thin films for biomedical application: characterization and biological response10.1016/j.msec.2019.03.072 ↗
19. Reduced graphene oxide coating enhances osteogenic differentiation of human mesenchymal stem cells on Ti surfaces10.1186/s40824-021-00205-x ↗
20. Femtosecond pulsed laser textured titanium surfaces with stable superhydrophilicity and superhydrophobicity10.1016/j.apsusc.2016.07.137 ↗
21. Femtosecond laser ablation on dental hard tissues—analysis of ablated profile near an interface using local effective intensity10.1134/S1054660X11090064 ↗
22. Characterization and evaluation of a femtosecond laser-induced osseointegration and an anti-inflammatory structure generated on a titanium alloy10.1093/rb/rbab006 ↗
23. Epidemiology and risk factors of peri-implantitis: a systematic review10.1111/jre.12562 ↗
24. Oral microbes, biofilms and their role in periodontal and peri-implant diseases10.3390/ma11101802 ↗
25. Multispecies communities: interspecies interactions influence growth on saliva as sole nutritional source10.4248/IJOS11025 ↗
26. In vitro evaluation of bacterial adhesion and bacterial viability of Streptococcus mutans , Streptococcus sanguinis, and Porphyromonas gingivalis on the abutment surface of titanium and zirconium dental implants10.1155/2019/4292976 ↗
27. comparison of the antibacterial effect of silver nanoparticles and a multifunctional antimicrobial peptide on titanium surface10.3390/ijms24119739 ↗
28. Development of bioactive and antimicrobial nano-topography over selective laser melted Ti6Al4V implant and its in-vitro corrosion behavior10.1016/j.jmbbm.2023.106210 ↗
29. Antibacterial adhesion strategy for dental titanium implant surfaces: from mechanisms to application10.3390/jfb13040169 ↗
30. Laser microtextured titanium implant surfaces reduce in vitro and in situ oral biofilm formation10.1371/journal.pone.0202262 ↗
31. Evaluation of Streptococcus oralis adhesion and biofilm formation on laser-processed titanium10.1515/cdbme-2021-2223 ↗
32. Femtosecond laser surface texturing of titanium as a method to reduce the adhesion of Staphylococcus aureus and biofilm formation10.1016/j.apsusc.2015.10.102 ↗
33. Review: processing of metals by equal-channel angular pressing10.1023/A:1017932417043 ↗
34. Possibilities of biocompatible material production using conform SPD technology10.5604/01.3001.0010.7746 ↗
35. Producing bulk ultrafine-grained materials by severe plastic deformation: ten years later10.1007/s11837-016-1820-6 ↗
36. Comparison of fibroblast and osteoblast response to cultivation on titanium implants with different grain sizes10.1155/2015/920893 ↗
37. The efficiency of systematic sampling in stereology and its prediction10.1111/j.1365-2818.1987.tb02837.x ↗
38. The unbiased estimation of number and sizes of arbitrary particles using the disector10.1111/j.1365-2818.1984.tb02501.x ↗
39. Effect of various implant surface treatments on osseointegration—a literature review’
40. Evaluating the osseointegration of nanostructured titanium implants in animal models: current experimental methods and perspectives (Review)10.1116/1.4958793 ↗
41. Laser-induced periodic surface structuring of biopolymers10.1007/s00339-012-7186-x ↗
42. Nano-scale modification of titanium implant surfaces to enhance osseointegration10.1016/j.actbio.2019.05.045 ↗
43. Femtosecond laser-texturing the surface of Ti-based implants to improve their osseointegration capacity10.1002/admi.202201164 ↗
44. Mechanism of superhydrophilic to superhydrophobic transition of femtosecond laser-induced periodic surface structures on titanium10.1016/j.surfcoat.2019.124931 ↗
45. Laser surface pattering of titanium for improving the biological performance of dental implants10.1002/adhm.201600858 ↗
46. Modulation of cell adhesion, proliferation and differentiation on materials designed for body implants10.1016/j.biotechadv.2011.06.004 ↗
47. The influence of surface topography of ceramic abutments on the attachment and proliferation of human oral fibroblasts10.1016/j.biomaterials.2004.02.037 ↗
48. Repeated exposure of nanostructured titanium to osteoblasts with respect to peri-implantitis10.3390/ma13030697 ↗
49. Adhesion and differentiation behaviors of mesenchymal stem cells on titanium with micrometer and nanometer-scale grid patterns produced by femtosecond laser irradiation10.1002/jbm.a.36503 ↗
50. Proliferation of osteoblasts on laser-modified nanostructured titanium surfaces10.3390/ma11101827 ↗
51. Comparison of hydrophilic and hydrophobic nano topographic surfaces of titanium alloys on pre-osteoblastic cell interaction10.1088/2057-1976/acd786 ↗
52. In vitro bioactivity and biocompatibility of femtosecond laser-modified Ti6Al4V alloy10.1007/s00339-018-2238-5 ↗
53. Biological response of chemically treated surface of the ultrafine-grained Ti–6Al–7Nb alloy for biomedical applications10.2147/IJN.S197099 ↗
54. The effects of chemical etching and ultra-fine grain structure of titanium on MG-63 cells response10.3390/met11030510 ↗
55. Critical review on biofilm methods10.1080/1040841X.2016.1208146 ↗
56. Analysis of bacterial detachment from substratum surfaces by the passage of air-liquid interfaces10.1128/AEM.67.6.2531-2537.2001 ↗
57. Scanning strategies in laser surface texturing: a review10.3390/mi14061241 ↗
58. Surface texturing of Ti6Al4V alloy using femtosecond laser for superior antibacterial performance10.2351/1.5081106 ↗
59. Influence of dental titanium implants with different surface treatments using femtosecond and nanosecond lasers on biofilm formation10.3390/jfb14060297 ↗
60. Oral microorganisms and biofilms: new insights to defeat the main etiologic factor of oral diseases10.3390/microorganisms10122413 ↗
61. Relevance of biofilm models in periodontal research: from static to dynamic systems10.3390/microorganisms9020428 ↗
62. Emerging titanium surface modifications: The war against polymicrobial infections on dental implants10.1590/0103-6440202204860 ↗