journal article·2024-10-01Open access

Investigating the influence of periwinkle shell powder on the thermal and mechanical performance of high-density polyethylene composites

Abbas Saifee Valsadwala, Sriram Srinivasan, Surya Rajan Balachandran, S Shamshath Begum, Asit Baran Samui, Sandeep Kumar Shukla

Materials Research Express· Volume 11· Issue 10

Abstract

Abstract In this study, the shell powder of Littorina littorea commonly called periwinkle was used as an eco-friendly filler in High-Density Polyethylene (HDPE) to form periwinkle/HDPE composites (PHPC). Understanding the effect of different particle sizes of periwinkle shell powder (PSP) and optimizing their influence on PHPC is the main scope of this work. Periwinkle shell (PS) particles with sizes ranging from <53 μm to 150 μm were chosen as reinforcements. The PSP sizes chosen in this study, <53 μm, 53 μm, 75 μm, 90 μm, 105 μm and 150 μm were named PHPCL53, PHPC53, PHPC75, PHPC90, PHPC105, and PHPC150, respectively. The composites were fabricated by incorporating 1 wt% PSP into the HDPE matrix using the compression molding technique and then subjected to morphological, thermal, and mechanical characterizations. Morphology studies using scanning electron microscopy (SEM) confirms 150 μm PSP had the best dispersion whereas 75 μm PSP resulted in agglomeration. PSP had little influence on the thermal stability of HDPE except for PHPC150 which showed an increase in the degradation temperature when compared to the virgin sample. Mechanical properties such as hardness, Young’s modulus, impact strength, and flexural modulus were enhanced by the addition of PSP. However, a decrease was noted in the elongation at break (%) and flexural strength of PHPC indicating the stiffening effect of the filler on the HDPE. In order to understand the particle size influence better, the extension evaluation method (EEM) was used for all samples and PHPC150 was found to be the best performing among all particle sizes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Potential of natural fiber/biomass filler-reinforced polymer composites in aerospace applications10.1016/B978-0-08-102131-6.00012-8 ↗
2. Mechanical properties of hybrid polymer composites: a review10.1007/s40430-020-02517-w ↗
3. Advances in polymer composites: biocomposites–state of the art, new challenges, and opportunities
4. Effect of natural filler materials on fiber reinforced hybrid polymer composites: an overview10.1080/15440478.2020.1854145 ↗
5. Poly(ethylene oxide)/clay nanocomposite: thermomechanical properties and morphology10.1016/j.polymer.2006.02.040 ↗
6. Polymer Composites: Reinforcing Fillers
7. Bio-based fillers for environmentally friendly composites
8. Saifee Valsadwala · 2020 · 48
9. Investigation on thermo-mechanical characteristics of treated/untreated Portunus sanguinolentus shell powder-based jute fabrics reinforced epoxy composites10.1177/1528083719832851 ↗
10. Effect of silane surface treatment on the physico-mechanical properties of shell powder reinforced epoxy modified phenolic friction composite10.1088/2053-1591/ab0ca5 ↗
11. Chemical content of the periwinkle shell and its suitability in thin layer chromatography
12. High-density polyethylene/mollusk shell-waste composites: effects of particle size and coupling agent on morphology, mechanical and thermal properties10.1016/j.jmrt.2019.01.008 ↗
13. Evans · 1990
14. Fabrication and modelling of the macro-mechanical properties of cross-ply laminated fibre-reinforced polymer composites using artificial neural network10.1080/09243046.2019.1573448 ↗
15. Low dielectric loss epoxy polymer composite from periwinkle shell microparticles10.21315/jps2020.31.1.1 ↗
16. Tribological behaviour of periwinkle shell powder-filled recycled polypropylene composites10.56431/p-1u74v2 ↗
17. Energy dispersive x-ray spectroscopy study of compound semiconductor zinc orthotitanate prepared by solid state reaction method10.1016/j.matpr.2020.03.794 ↗
18. Assessment of mechanical properties of HDPE composite with addition of marble and granite dust10.1016/j.asej.2020.02.001 ↗
19. Effect of shape and size of filler particle on the aggregation and sedimentation behavior of the polymer composite10.1016/j.powtec.2020.02.054 ↗
20. Assessment of the thermal pyrolysis characteristics and kinetic parameters of spent coffee waste: a TGA-MS study10.1080/15567036.2020.1736693 ↗
21. Calcium carbonate (CaCO3) nanoparticle filled polypropylene: effect of particle surface treatment on mechanical, thermal, and morphological performance of composites10.1002/app.35319 ↗
22. Nwanonenyi · The International Journal Of Engineering And Science (IJES) · 2013 · 2 · 42–48
23. Development of HDPE-modified eggshell composite10.1002/pc.24108 ↗
24. An overview of mechanical and physical testing of composite materials
25. Compounding and the mechanical properties of catla fish scales reinforced-polypropylene composite—from biowaste to biomaterial10.1080/09243046.2019.1647981 ↗
26. Sustainable use of eggshell powder in the composite based on recycled polystyrene and virgin polystyrene mixture10.1080/1023666X.2019.1567089 ↗
27. Influence of sample thickness, curvature and notches on the charpy impact strength - an approach to standardise the impact strength of curved test specimens and biological structures10.1016/j.polymertesting.2020.106864 ↗
28. Regulation on dual-interface of core–shell dispersed phases and mechanical properties of PP blends by rotary evaporation-assisted melt grafted EPDM-g-MAH10.1016/j.jcomc.2020.100065 ↗
29. Effects of gamma radiation on the impact strength of polypropylene (PP)/high density polyethylene (HDPE) blends10.1016/j.rinp.2019.02.020 ↗
30. Properties comparison of high density polyethylene composites filled with three kinds of shell fibers10.1016/j.rinp.2018.09.054 ↗
31. Investigation of nano-talc as a filling material and a reinforcing agent in high density polyethylene (HDPE)10.1016/S1001-0521(07)60117-X ↗
32. Effect of micro-sized marble dust on mechanical and thermo-mechanical properties of needle-punched nonwoven jute fiber reinforced polymer composites10.1002/pc.25873 ↗
33. The influence of particle size and surface treatment of filler on the properties of oyster shell powder filled polypropylene composites10.1002/pc.24225 ↗
34. Tensile and flexural behavior of hemp fiber reinforced virgin-recycled HDPE matrix composites10.1016/j.mspro.2014.07.155 ↗
35. Mechanical behavior of additively manufactured nanoclay/HDPE nanocomposites10.1016/j.compstruct.2020.112442 ↗
36. Investigation of thermal properties of waste tungsten carbide (WC) loaded HDPE matrix10.1016/j.mtcomm.2020.101547 ↗
37. Improving the mechanical properties of polypropylene composites with coconut shell particles10.1177/26349833211007497 ↗
38. Experimental investigation on the influence of novel catalyst in co-pyrolysis of polymeric waste: characterization of oil and preparation of char reinforced composites10.1016/j.jclepro.2021.128225 ↗
39. Effects of snail shell powder on the mechanical properties of low density polyethylene (LDPE)
40. Study on the properties of coconut shell powder reinforced high-density polyethylene composite
41. Evaluation of the effect of reinforcement particle sizes on the impact and hardness properties of hardwood charcoal particulate-polyester resin composites10.1016/j.matpr.2020.02.980 ↗
42. A review on peanut shell powder reinforced polymer composites10.1080/03602559.2018.1471720 ↗
43. Tribological performance evaluation of newly synthesized silane treated shell powders in friction composites10.1088/2053-1591/ab08e0 ↗
44. Materials used in automotive manufacture and material selection using ashby charts10.5923/j.ijme.20180803.02 ↗
45. Musa · 2014 · 17
46. Effect of filler content and particle size on themechanical properties of corn cob powder filledrecycled polypropylene composites
47. Issa Salih · 2015 · 33 · 1348–60
48. Characterization of periwinkle shell ash reinforced polymer composite for automotive application10.33003/fjs-2024-0801-2158 ↗
49. Reinforcement of high density polyethylene with snail shell powder10.5923/j.ajps.20180801.03 ↗