journal article·2024-12-01Open access

Designing for efficiency: an exploration of optimized joint configurations in tyne cultivator design

Elavarasan S, Manimaran G

Materials Research Express· Volume 11· Issue 12

Abstract

Abstract In farming, soil ploughing for seedbed preparation is carried out using a 9-tyne cultivator. Friction commonly occurs at various joints, particularly when the tyne connects to the cultivator frame, which notably affects both performance and failure rates of the bolted joints. Previously, a bolt nut was used at this joint (joint 1), which caused rotation issues during ploughing. The tyne is now attached to the main frame via welded side plates, with springs providing preload on the joint. As the cultivator moves forward, the tyne exerts a draft force through the chisel plough onto the field. Continuous loading may lead to slight bending of the tyne, which can affect ploughing efficiency. To address the issue, an additional plate was welded onto joint 2, which initially reduced failures. However, problems persisted, particularly in joint 2, where significant frictional losses were still occurring. To further mitigate this, a bush pin was introduced in joint 3, enabling rotation within the bush and thereby reducing frictional losses and tyne bending. A comparison of joints 1, 2, and 3 was conducted, focusing on design parameters and the tractor draft force of the Swaraj 744FE model. The bush pin joint emerged as the most effective solution. Additionally, further optimizations through bush and pin size adjustments yielded promising results. The study highlights the reduction in friction losses, tyne bending, and FEM validation of stress analysis. Experimental and numerical displacement results under varying loads are compared for three types of joints. Joint 3 consistently shows superior performance, with experimental displacements of 0.55 mm at 0N, increasing to 1.25 mm at 10,000N, which aligns closely with numerical predictions. SEM analysis further reveals that Joint 3 has a smoother and more uniform surface, enhanced crack resistance, and structural integrity under stress compared to Joints 1 and 2. These findings validate the suitability of bush pin type joints for high stress and wear resistant applications, supported by their improved mechanical durability and numerical accuracy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Soil Mechanics and Vehicle Dynamics · Agricultural Engineering and Mechanization · Agriculture and Farm Safety

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Possibilities of direct drilling and reduced tillage in second crop silage corn10.1016/j.still.2005.04.012 ↗
2. Modelling residue incorporation of selected chisel ploughing tools using the discrete element method (DEM)10.1016/j.still.2019.104505 ↗
3. Effect of plowing depth of tillage and forward speed on the performance of a medium size chisel plow operating in a sandy soil10.3844/ajabssp.2010.247.255 ↗
4. Defining the effect of sweep tillage tool cutting edge geometry on tillage forces using 3D discrete element modelling10.1016/j.inpa.2015.07.001 ↗
5. Combined finite element and multi-body dynamics analysis of effects of hydraulic cylinder movement on ploughshare of horizontally reversible plough10.1016/j.still.2016.06.002 ↗
6. Active and passive elements of a combined tillage machine: interaction, draught requirement and energy consumption10.1006/jaer.1993.1080 ↗
7. Overall efficiency of tractor operating in the field10.13031/2013.25911 ↗
8. Performance of combined tillage tool operating under four different linkage configurations10.1016/j.still.2018.06.004 ↗
9. Computation of member stiffness in bolted connections using the finite element analysis10.1080/15367730500374407 ↗
10. 3D dynamic analysis of soil–tool interaction using the finite element method10.1016/j.jterra.2003.09.002 ↗
11. Study the effect of tool geometry and operational conditions on mouldboard plough forces and energy requirement: part 1. finite element simulation10.1016/j.compag.2015.08.006 ↗
12. Reliability-based design for soil tillage machines10.1016/j.jterra.2010.06.001 ↗
13. Experimental and numerical study on press-fitted railway axles competition between fretting and plain fatigue10.1016/j.ijfatigue.2023.108032 ↗
14. Failure case analysis of fastening bolts for trolley rail of quay crane10.1016/j.engfailanal.2022.106984 ↗
15. Fatigue strength improvement in roller chain due to press fitting between pin and outer plate and between bush and inner plate10.1016/j.ijfatigue.2022.107451 ↗
16. On prestress stiffness analysis of bolt-plate contact assemblies10.1007/s00419-007-0142-0 ↗
17. Stiffness analysis and improvement of bolt-plate contact assemblies10.1080/15397730701735749 ↗
18. Numerical modelling for prediction of ductile fracture of bolted structure under tension shear loading10.1016/j.finel.2012.12.003 ↗
19. Theoretical analysis of the spatial variability in tillage forces for fatigue analysis of tillage machines10.1016/j.jterra.2011.05.002 ↗
20. Khurmi · 2005
21. 3D finite element simulation of a single-tip horizontal penetrometer–soil interaction. Part I Development of the model and evaluation of the model parameters10.1016/j.still.2013.08.002 ↗
22. Controlling toolholder fretting through simple design modifications10.1016/S0890-6955(00)00011-0 ↗
23. Analysis of the mechanical properties and wear characteristics of nail teeth based on sowing layer residual film recovery machine10.1016/j.engfailanal.2022.106869 ↗