Numerical simulation of heat transfer processes in shell and tube phase change heat exchangers for recovering industrial waste heat
Source abstract
Abstract
Abstract This article combines phase change energy storage technology with shell and tube heat storage and exchange devices to establish a three-dimensional numerical model of the shell and tube phase change heat storage and exchange device. The hexahedral structured grid division is used to make the simulation results more accurate. Combined with the computational fluid dynamics software Fluent and the related principles of phase change heat transfer, the effects of different heat transfer fluid temperatures and flow rates on the phase change process of phase change materials and the fluid outlet temperature in the phase change heat exchanger were numerically simulated. The results show that under the set parameters, when the inlet water temperature increases from 70 °C to 90 °C, the time required for the outlet temperature to increase from 20 °C to 60 °C is shortened by 23%, while when the temperature is constant, the inlet temperature of heat transfer fluid is shortened by 69%. Analysis shows that the influence of the inlet temperature of the heat transfer fluid on the heat storage and release of phase change materials is significantly greater than the inlet flow rate.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Phase Change Materials Research · Coal Combustion and Slurry Processing · Freezing and Crystallization Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Advances in resource utilization of waste in phase change materials10.1016/j.est.2024.113342 ↗
2. Performance enhancement in latent heat thermal storage system: a review10.1016/j.rser.2009.06.024 ↗
3. Hybrid heat transfer enhancement for latent-heat thermal energy storage systems: a review10.1016/j.ijheatmasstransfer.2019.03.111 ↗
4. Heat transfer performance and thermal energy storage in nano-enhanced phase change materials driven by thermocapillarity10.1016/j.icheatmasstransfer.2021.105672 ↗
5. Thermal energy storage performance of fatty acids as a phase change material10.1080/009083190913971 ↗
6. Numerical simulation of phase change heat transfer of a solar flat-plate collector with energy storage10.1007/s12273-009-9224-y ↗
7. Effect of heating modes on melting performance of a solid–liquid phase change using lattice Boltzmann model,10.1016/j.icheatmasstransfer.2019.104330 ↗
8. Experimental and computational evolution of a shell and tube heat exchanger as a PCM thermal storage system10.1016/j.icheatmasstransfer.2013.11.008 ↗
9. A combined experimental and computational study on the melting behavior of a medium temperature phase change storage material inside shell and tube heat exchanger10.1016/j.icheatmasstransfer.2012.07.028 ↗
10. Numerical analysis of phase-change material melting in triplex tube heat exchanger10.1016/j.renene.2019.06.092 ↗
11. Effect of parameters on the melting performance of triplex tube heat exchanger incorporating phase change material10.1016/j.renene.2021.04.051 ↗
12. Experimental investigation of the horizontal double pipe heat exchanger utilized phase change material10.1088/1757-899X/671/1/012148 ↗
13. Numerical simulation on heat transfer enhancement of phase change thermal storage devices for low-middle temperature10.1007/s11595-016-1448-y ↗
14. A numerical investigation of the melting heat transfer characteristics of phase change materials in different plate heat exchanger (latent heat thermal energy storage) systems10.1016/j.ijheatmasstransfer.2019.119117 ↗
15. Melting and solidification performance in two horizontal shell-and-tube heat exchangers with different structures10.1002/er.5743 ↗
16. Analysis of the effect of eccentricity and operational parameters in PCM-filled single-pass shell and tube heat exchangers10.1016/j.renene.2016.05.090 ↗
17. Accelerated melting of PCM in energy storage systems via novel configuration of fins in the triplex-tube heat exchanger10.1016/j.ijheatmasstransfer.2018.03.095 ↗
18. Enhance heat transfer for PCM melting in triplex tube with internal–external fins10.1016/j.enconman.2013.05.003 ↗
19. Experimental investigation of phase change in a multitube heat exchanger10.1016/j.est.2019.03.024 ↗
20. Numerical simulation and analysis Of PCM on phase change process consider natural convection influence10.2991/iccasm.2012.9 ↗
21. Numerical study of a thermal energy storage device utilizing graphite foam infiltrated with a phase change material10.1007/s11665-013-0773-y ↗
22. Parametric characterization of a full-scale plate-based latent heat thermal energy storage system10.1016/j.applthermaleng.2020.115441 ↗
23. Performance investigation and sensitivity analysis of shell-and-tube phase change material thermal energy storage10.1016/j.est.2020.102040 ↗
24. Numerical investigation and experimental validation of the thermal perf ormance enhancement of a compact finned-tube heat exchanger for efficient latent heat thermal energy storage10.1016/j.jclepro.2020.124238 ↗
25. Experimental analysis of a latent heat storage unit with multichannel flat tube and copper foam10.1016/j.applthermaleng.2020.116503 ↗
26. Plate type heat exchanger for thermal energy storage and load shifting usi ng phase change material10.1016/j.enconman.2018.12.013 ↗
27. Research on high temperature thermal stability and safety of two types of composite inorganic phase changethermal storage materials
28. Experimental and numerical studies on melting process of phase change materials(PCMs) embedded in open-cells metal foams10.1016/j.ijthermalsci.2021.107151 ↗
29. k-ε turbulent model and its application to the fluent, industrial
30. Study of airflow in a cold-region tunnel using a standard k-ε turbulence model and air-rock heat transfer characteristics: validation of the CFD results10.1007/s00231-012-1081-z ↗
31. Versteeg · 1995