journal article·2023-04-01Open access

Flow behavior and dynamic transformation of titanium alloy Ti62A during deformation at different temperatures and strain rates

Haiting Guan, Qiang Fu, Wei Xiang, Wu Min, Yunsen Xiong, Wuhua Yuan

Materials Research Express· Volume 10· Issue 4

Abstract

Abstract The effect of deformation temperature and strain rate on the hot deformation behavior and dual-phase microstructure evolution of the titanium alloy Ti62A was examined using electron backscatter diffraction. In general, the activation energy of Ti62A during steady-state deformation in the ( α + β ) phase is 295 kJ mol −1 . The primary recovery mechanisms of the β phase during hot deformation are dynamic recovery and dynamic recrystallization (DRX). Moreover, discontinuous DRX occurs at low temperatures and high strain rates, whereas continuous DRX occurs at high temperatures and low strain rates. Furthermore, high strain rates in the ( α + β ) phase and high deformation temperatures are advantageous to dynamic phase changes during dynamic transformation (DT). The β phase penetrates the lamellar α s phase, causing fragmentation and spheroidization of the α s phase. Finally, DT begins more easily in the fine α s phase than in the coarse α p phase.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Measurement of flow stress in hot axisymmetric compression tests10.1179/mht.2006.005 ↗
2. Research and development of titanium alloy for shipbuilding in china10.3321/j.issn:1005-023X.2005.06.019 ↗
3. Development of materials for manned deep-ocean submersible
4. Flow softening and dynamic recrystallization behavior of BT9 titanium alloy: A study using process map development10.1016/j.jallcom.2016.10.322 ↗
5. Dynamic recrystallization in titanium alloys: a comprehensive review10.1520/MPC20190032 ↗
6. An experimental study on the mechanism of texture evolution during hot-rolling process in a β titanium alloy10.1016/j.jallcom.2014.03.070 ↗
7. Dynamic and post-dynamic recrystallization under hot, cold, and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
8. Study on hot deformation behavior and microstructure evolution Rule of Ti-5.5Al-3Nb-2Zr-1Mo titanium alloy10.14158/j.cnki.1001-3814.20210055 ↗
9. Thermal deformation behavior of TC21 titanium alloy10.11817/j.ysxb.1004.0609.2020-36496 ↗
10. The microstructural evolution and special flow behavior of Ti-5Al-2Sn-2Zr-4Mo-4Cr during isothermal compression at a low strain rate10.1007/s11665-017-2892-3 ↗
11. Globularization evolution of lamellar microstructure and destruction of burgers orientation relationship for tc17 titanium alloy during hot deformation
12. Microstructure evolution mechanism of TA19 titanium alloy with bi-modal structure during high temperature deformation10.13289/j.issn.1009-6264.2020-0183 ↗
13. Deformation behaviour and microstructural evolution during the hot compression of Ti-5Al4Zr8Mo7V alloy10.1016/j.mtcomm.2019.100873 ↗
14. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditio10.1016/j.pmatsci.2013.09.002 ↗
15. Research and development progress of high temperature deformation of titanium alloy with discontinuous yielding
16. Experimental investigation on dynamic phase transformation and texture evolution of Ti55531 high strength titanium alloy during hot compression in the α+β region10.1016/j.msea.2019.138851 ↗
17. Systematic analysis of the softening mechanism and texture evolution of Ti–6Cr–5Mo–5V–4Al alloy during hot compression in α+β phase region10.1016/j.msea.2022.143571 ↗
18. High-temperature deformation behavior and recrystallization mechanism of a near beta titanium alloy Ti-55511 in β phase region10.1016/j.msea.2022.143335 ↗
19. Flow softening and microstructural evolution of near β titanium alloy Ti-35421 during hot compression deformation in the α+β region10.1016/j.jmrt.2022.05.144 ↗
20. On the mechanism of hot deformation10.1016/0001-6160(66)90207-0 ↗
21. Self-Diffusion of Ti, Zr, and Hf in their HCP Phases, and Diffusion of Nb95 in HCP Zr10.1007/BF00550978 ↗
22. Thermal flow behaviors and microstructure evolution of TC17 Alloy10.13373/j.cnki.cjrm.XY18090041 ↗
23. Effect of strain rate upon plastic flow of steel10.1063/1.1707363 ↗
24. The formation of strong {100} texture by dynamic strain-induced boundary migration in hot compressed Ti-5Al-5Mo-5V-1Cr-1Fe alloy10.3390/met7100412 ↗
25. Opposing and driving forces associated with the dynamic transformation of Ti-6Al-4V10.1007/s11661-018-4551-1 ↗
26. Transformation of α→β During Hot Deformation in the Two-Phase Region of Ti–6Al–2Zr–1Mo–1V Alloy10.1007/978-3-030-75381-8_150 ↗
27. Phase transformation and dynamic recrystallization behaviors in a Ti55511 titanium alloy during hot compression10.1016/j.jallcom.2019.04.319 ↗
28. Effects of heating rate on the alloy element partitioning and mechanical properties in equiaxed α+β Ti-6Al-4V alloy10.1016/j.jmst.2021.02.061 ↗
29. Coarsening behavior of an alpha-beta titanium alloy10.1007/s11661-004-0228-z ↗
30. Effect of temperature and strain rate on the deformation behavior of Ti5321 during hot-compression10.1016/j.jallcom.2021.159938 ↗
31. Static globularization mechanism of Ti-17 alloy during heat treatment10.1016/j.jallcom.2017.11.117 ↗
32. Deformation behavior and microstructure evolution of titanium alloys with lamellar microstructure in hot working process: a review10.1016/j.jmst.2019.07.052 ↗
33. The influence of temperature and strain rate on the deformation response and microstructural evolution during hot compression of a titanium alloy Ti–6Al–4V–0.1B10.1016/j.jallcom.2012.08.123 ↗
34. Dynamic and post-dynamic recrystallization under hot, cold, and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
35. Modeling discontinuous dynamic recrystallization using a physically based model for nucleation10.1016/j.actamat.2009.07.024 ↗
36. Formation mechanism of texture during dynamic recrystallization in γ-TiAl, nickel and copper examined by microstructure observation and grain boundary analysis based on local orientation measurements10.1016/S1359-6454(03)00218-0 ↗
37. Hot deformation behavior and mechanism of a new metastable β titanium alloy Ti-6Cr-5Mo-5V-4Al in single phase region10.1016/j.msea.2021.141231 ↗
38. Hot deformation behavior and mechanism of a new metastable β titanium alloy Ti–6Cr–5Mo–5V–4Al in single phase region10.1016/j.msea.2021.141231 ↗
39. Dynamic recrystallization mechanism and improved mechanical properties of a near α high temperature titanium alloy processed by severe plastic deformation10.1016/j.matchar.2020.110281 ↗
40. Continuous dynamic recrystallization during the transient deformation in a Ni-30%Fe austenitic model alloy10.1016/j.msea.2019.02.048 ↗
41. EBSD study of a hot deformed nickel-based superalloy10.1016/j.jallcom.2015.04.008 ↗