journal article·2025-02-01Open access

Microstructure and tensile behavior of high-chromium cast iron/Hadfield steel composite fabricated by hot rolling process

Guijun Wu, I V Merkuryev, Zhanhao Liang, T B Duishenaliev, Guofeng Yuan, Xiuli Guo

Materials Research Express· Volume 12· Issue 2

Abstract

Abstract This study employed a hot-rolling technique to fabricate a bimetal composite combining Hadfield steel and High-chromium cast iron (HCCI). The microstructure evolution and tensile properties of the bimetal composite were studied. Experimental results revealed that initial HCCI layers, characterized by limited plasticity, underwent necking and fragmentation into irregular fragments during deformation. The bonding interface of the two metals presented a wave shape. The two metals fused together and showed a good metallurgical bonding without interface cracks and delamination. The composite demonstrated an average tensile strength of 284 MPa. The results of tensile test showed that a large number of tunnel cracks were formed near the fracture of the sample. In the bimetallic composite, crack propagation stopped or transferred when encountering ductile Hadfield steel.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Effect of Cr: Fe ratio on the mechanical properties of (Cr, Fe)7C3 ternary carbides in abrasion-resistant white cast irons10.1007/s10853-023-08461-z ↗
2. Microstructure and erosion wear properties of high chromium cast iron added nitrogen by high pressure in alkaline sand slurry10.1016/j.wear.2021.203655 ↗
3. Destabilization treatment and its influence on microstructure and matrix Hardness of high-Cr cast iron10.1007/s11661-023-07216-4 ↗
4. Comparing the abrasion performance of NiHard-4 and high-Cr-Mo white cast irons: the effects of chemical composition and microstructure10.1016/j.wear.2021.204208 ↗
5. Refinement of primary carbides in hypereutectic high-chromium cast irons: a review10.1007/s10853-020-05260-8 ↗
6. Abrasive wear behavior of high chromium cast iron and hadfield steel—a comparison10.1016/S1006-706X(12)60086-7 ↗
7. Erosion wear behavior of high chromium cast irons10.1007/s12666-022-02860-7 ↗
8. Fracture toughness of high-chromium white irons: influence of cast structure10.1023/A:1004755511214 ↗
9. Influence of vanadium and boron additions on the microstructure, fracture toughness, and abrasion resistance of martensite-carbide composite cast stee10.1155/2016/1203756 ↗
10. Scouring erosion resistance of metallic materials used in slurry pump service10.1016/j.wear.2003.10.002 ↗
11. Effect of electric current pulse on size of primary carbides in hypereutectic high chromium cast irons in different solidification stages10.1088/2053-1591/ab563b ↗
12. The difference in effects of electric current pulses on inoculation of austenite and M7C3 carbides10.1088/2053-1591/abb2d0 ↗
13. Wear behavior and the corresponding work hardening characteristics of Hadfield steel10.1016/j.triboint.2018.01.044 ↗
14. Strain hardening and nanocrystallization behaviors in Hadfield steel subjected to surface severe plastic deformation10.1016/j.msea.2018.05.059 ↗
15. Explosion hardening of Hadfield steel crossing10.1179/174328408X363263 ↗
16. Microstructure and mechanical properties of Hadfield steel matrix composite reinforced with oriented high-chromium cast iron bars10.1007/s10853-010-4549-6 ↗
17. Influence of hot rolling+heat treatment on microstructure and mechanical properties of NM500/Q345/NM500 composite plate10.1007/s10853-020-05666-4 ↗
18. Microstructural and wear investigation of high chromium white cast iron hard facing alloys deposited on carbon steel10.1016/j.jallcom.2020.157472 ↗
19. Fabrication of high chromium coast iron and medium carbon steel bimetal by liquid-solid casting in electromagnetic induction field10.1016/j.matdes.2011.01.006 ↗
20. Effect of thermomechanical treatment on sliding wear of high-Cr cast iron with large plastic deformation10.1016/j.triboint.2015.06.002 ↗
21. Study on fragmentation and dissolution behavior of carbide in a hot-rolled hypereutectic high chromium cast iron10.1016/j.jallcom.2014.07.131 ↗
22. Diffusion behavior and mechanical properties of high chromium cast iron/low carbon steel bimetal10.1016/j.msea.2018.01.111 ↗
23. Effect of thickness of interfacial intermetallic com-pound layers on the interfacial bond strength and the uniaxial tensile behavior of 5052 AI/AZ31B Mg/5052 Al clad sheets10.1039/C5RA15357C ↗
24. Investigation of structure and mechanical properties of multi-layered Al/Cu composite produced by accumulative roll bonding (ARB) process10.1016/j.compscitech.2008.02.029 ↗
25. Strong and ductile steel via high dislocation density and heterogeneous nano/ultrafine grains10.1016/j.msea.2019.04.112 ↗
26. The synergistic effects of boron and impression creep testing during paced controlling of temperature for P91 steels10.1002/adem.202300053 ↗
27. The synergistic effects among crystal orientations, creep parameters, local strain, macro–microdeformation, and polycrystals’ hardness of boron alloyed P91 steels10.1002/srin.202100819 ↗
28. Tensile and bending behaviors and characteristics of laminated Ti-(TiBw/Ti) composites with different interface status10.1016/j.compositesb.2016.10.001 ↗