journal article·2025-06-01Open access

Structural, morphological, and optical properties of flowerlike Sm-doped h-MoO 3 nanorods

Md Serajum Manir, Md Zuel Rana, Supria Dutta, Noshin Ferdous Shamma, M S Alam, Sapan Kumar Sen

Materials Research Express· Volume 12· Issue 6

Abstract

Abstract An effective hydrothermal process was used to synthesize both pure h-MoO 3 and Sm-dopedh-MoO 3 (0 M%, 0.5 M%, 1.5 M%, and 2.5 M%) compositions. The x-ray diffraction (XRD) approach was used to determine the prepared materials' structural properties and phase purity. The structure and crystallite size of the samples were found to be significantly influenced by the doping concentration. Field Emission Scanning Electron Microscopy (FESEM) micrographs revealed that the nanorods are randomly aligned with flower-like hexagonal shapes, where the average length and diameter range from ∼ 1.9–2.5 μm and ∼ 300-600 nm, respectively. Williamson–Hall (W–H) and Debye–Scherrer (D–S) methods compare the variation of structural characteristics, including dislocation density, crystallite size, and lattice strain. Energy Dispersive x-ray measurement (EDX) demonstrates the expected contents of the respective compositions. The Fourier Transform Infrared Spectroscopy (FTIR) was used to describe the vibrational behavior of chemical bonds, and the detected peaks demonstrate the production of h-MoO 3 . In FTIR, there were noticeable variances in peak intensities and wavenumbers between the undoped and doped samples due to the presence of various functional groups; the detected peaks support the XRD result that the prepared h-MoO 3 is pure and maintains a hexagonal shape with doping. The Diffuse Reflectance Spectra (DRS) indicate the optical bandgap decreased due to doping, where the optimum bandgap was obtained for 0.5 M% Sm doped in h-MoO 3 . Thus, the significant influence of Sm doping on the structural, morphological, and optical properties of h-MoO 3 nanorods indicates the possibility of application in the field of photocatalytic dye degradation, hydrogen generation, and magnetic behaviors.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · Pigment Synthesis and Properties · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Applications of nanotechnology in daily life
2. Nanotechnology goals and challenges for electronic applications10.1109/TNANO.2002.1005426 ↗
3. High-performance flexible solid-state ni/fe battery consisting of metal oxides coated carbon cloth/carbon nanofiber electrodes10.1002/aenm.201601034 ↗
4. Current status and future directions of all-solid-state batteries with lithium metal anodes, sulfide electrolytes, and layered transition metal oxide cathodes10.1016/j.nanoen.2021.106081 ↗
5. Structural, electronic, optical and thermodynamic properties of AlAuO2 and AlAu0.94Fe0.06O2 compounds scrutinized by density functional theory (DFT)10.1016/j.heliyon.2023.e21405 ↗
6. First principles prediction of structural, electronic, mechanical, thermodynamic, optical and photocatalytic properties of In(X)O2, where X = Cu, Ag crystal scrutinized by hybrid DFT10.1016/j.cocom.2024.e00884 ↗
7. Dielectric nanocomposites with insulating properties10.1109/TDEI.2005.1522186 ↗
8. High temperature zirconia oxygen sensor with sealed metal/metal oxide internal reference10.1016/j.snb.2006.12.022 ↗
9. Structural and orientational properties of the ferro, antiferroelectric, and re-entrant smectic C* phases of ZLL7/* by deuterium NMR and other experimental techniques10.1021/jp0621777 ↗
10. Perspective on engineering transition-metal oxides10.1021/cm402063u ↗
11. Solid oxide fuel cells10.1039/b105764m ↗
12. Electronic, thermodynamic, optical and photocatalytic properties of GaAgO2 and AlAgO2 compounds scrutinized via a systemic hybrid DFT10.1016/j.cocom.2022.e00778 ↗
13. Non-noble metal-transition metal oxide materials for electrochemical energy storage10.1016/j.ensm.2018.04.002 ↗
14. Gap states assisted moo3 nanobelt photodetector with wide spectrum response10.1038/srep04891 ↗
15. Crystalline molybdenum oxide thin-films for application as interfacial layers in optoelectronic devices10.1021/acsami.6b14228 ↗
16. Metal-organic-framework-based materials as platforms for renewable energy and environmental applications10.1016/j.joule.2017.08.008 ↗
17. Molybdenum oxides—from fundamentals to functionality10.1002/adma.201701619 ↗
18. Spectral characterization of mechanically synthesized MoO3-CuO nanocomposite10.1007/s40089-015-0178-z ↗
19. Hydrothermal synthesis of hexagonal and orthorhombic MoO3 nanoparticles10.1016/j.jallcom.2011.05.067 ↗
20. Electrodeposited α- And β-phase MoO3 films and investigation of their gasochromic properties10.1021/cg201500b ↗
21. α-MoO3 nanoparticles: Solution combustion synthesis, photocatalytic and electrochemical properties10.1039/C4RA05135A ↗
22. Effect of Fe-doping and post annealing temperature on the structural and optical properties of MoO3 nanosheets10.1007/s10854-019-01805-z ↗
23. Effect of reaction atmosphere on structural and optical properties of hexagonal molybdenum oxide (h-MoO3)
24. AZn4O-containing doubly interpenetrated porous metal-organic framework for photocatalytic decomposition of methyl orange10.1039/c1cc12802g ↗
25. Acute toxicity of cerium oxide, titanium oxide and iron oxide nanoparticles using standardized tests10.1016/j.desal.2010.10.052 ↗
26. Chemistry of doped colloidal nanocrystals10.1021/cm304104m ↗
27. Nanostructured electrochromic smart windows: traditional materials and NIR-selective plasmonic nanocrystals10.1039/C4CC03109A ↗
28. A review on the visible light active titanium dioxide photocatalysts for environmental applications10.1016/j.apcatb.2012.05.036 ↗
29. Dy-doped MoO3 nanobelts synthesized via hydrothermal route: influence of dy contents on the structural, morphological and optical properties10.1016/j.jallcom.2021.160070 ↗
30. In situ fusion of MoO3/Na2Ti3O7 nanotube nanocomposite for improved electrochemical performance10.1088/2053-1591/ab49d4 ↗
31. Synergistic enhancement of electrochemical storage using g-C3N4 modified MoO2/MoO3 nanostructure electrodes via thermal decomposition10.1016/j.est.2024.112716 ↗
32. Microwave synthesized nano-photosensitizer of CdS QD/MoO3–OV/g–C3N4 heterojunction catalyst for hydrogen evolution under full-spectrum light10.1016/j.ceramint.2020.08.004 ↗
33. Enhanced photocatalytic activity of MoO3-supported SnO2 composite synthesized by a wet chemical method10.1166/mex.2016.1287 ↗
34. Physical study of nano-structured MoO3 films codoped with cobalt and nickel in which there is a ferro-diamagnetic transition10.1016/j.jallcom.2018.01.231 ↗
35. Physical study of Eu doped MoO3 thin films10.1016/j.jallcom.2016.06.022 ↗
36. Defects and Aliovalent Doping Engineering in Electroceramics10.1021/acs.chemrev.9b00507 ↗
37. Optimization of MoO3 nanoparticles as negative-electrode material in high-energy lithium ion batteries10.1016/j.jpowsour.2009.08.013 ↗
38. Influence of annealing temperature on the properties of molybdenum oxide nanoparticles prepared through chemical precipitation method for p-n junction diode application10.1016/j.ijleo.2018.09.020 ↗
39. Structural and optical properties of sol-gel synthesized h-MoO3 nanorods treated by gamma radiation10.1088/2632-959X/aba4f8 ↗
40. Nanostructured DyCrO3-rGO for efficient photocatalytic dye degradation and hydrogen generation10.1016/j.matlet.2022.132159 ↗
41. Direct synthesis of functionalized mesoporous silica by non-ionic assembly routes. quantitative chemical transformations within the materials leading to strongly chelated transition metal ions10.1021/cm034903d ↗
42. Synthesis of molybdenum oxide nanoparticles by nanosecond laser ablation10.1016/j.matchemphys.2019.122163 ↗
43. Microwave-assisted synthesis of molybdenum oxide nanoparticles
44. Membranes of carbon nanofibers with embedded MoO3 nanoparticles showing superior cycling performance for all-solid-state flexible supercapacitors10.1016/j.mtener.2017.08.004 ↗
45. Gas sensing properties of MoO3 nanoparticles synthesized by solvothermal method10.1007/s11051-009-9751-6 ↗
46. Synthesis of MoS2 inorganic fullerene-like nanoparticles by a chemical vapour deposition method south african
47. MoO3 overview: hexagonal plate-like MoO3 nanoparticles prepared by precipitation method10.1007/s10854-018-8670-7 ↗
48. Effect of gamma (γ−) irradiation on the structural, morphological, optical and electrical properties of spray pyrolysis-deposited h-MoO3 thin films10.1016/j.surfin.2019.100377 ↗
49. Crystal structure determination. II: hexagonal structures
50. Estimation of crystallite size, lattice parameter, internal strain and crystal impurification of nanocrystalline Al3Ni20Bx alloy by williamson-hall method10.15251/JOR.2020.165.323 ↗
51. Size-strain distribution analysis from XRD peak profile of (Mg, Fe) co-doped SnO2 nanoparticles fabricated using chemical co-precipitation route10.1016/j.ceramint.2024.08.254 ↗
52. X-ray peak profile analysis of pure and dy-doped α -MoO3 nanobelts using halder-wagner methods10.1088/2043-6254/ab8732 ↗
53. The dielectric studies on sol–gel routed molybdenum oxide thin film10.1142/S2010135X17500114 ↗
54. Loss mechanisms in kesterite solar cells
55. The kubelka-munk diffuse reflectance formula revisited10.1080/05704928.2010.537004 ↗
56. Structural, optical, vibrational and photoluminescence studies of Sn-doped MoO3 sprayed thin films10.1016/j.materresbull.2015.08.011 ↗
57. Structural, optical and photocatalytic studies of Zn doped MoO3 nanobelts10.1016/j.chemphys.2019.110410 ↗
58. Aqueous synthesis of molybdenum trioxide (h-MoO3, α-MoO3·H2O and h-/α-MoO3composites) and their photochromic properties study10.1016/j.jallcom.2016.10.092 ↗
59. Synthesis of h-MoO3 nanorods and h-/α-MoO3 composites and their photocatalytic performance10.1016/S1003-6326(23)66250-8 ↗
60. Mechanistic features of the ethane oxidative dehydrogenation by in situ FTIR spectroscopy over a MoO3/Al2O3 catalyst10.1016/j.apcata.2003.12.030 ↗
61. Efficient adsorption of methylene blue on hybrid structural phase of MoO3 nanostructures10.1016/j.matchemphys.2021.125211 ↗
62. A novel synthesis of α-MoO3 nanobelts and the characterization10.1016/j.jallcom.2013.09.137 ↗
63. Perovskite LaFeO3/montmorillonite nanocomposites: Synthesis, interface characteristics and enhanced photocatalytic activity10.1038/srep19723 ↗
64. Temperature-dependent phase transition and comparative investigation on enhanced magnetic and optical properties between sillenite and perovskite bismuth ferrite-rGO nanocomposites10.1063/1.4985840 ↗
65. Effect of carrier concentration on the optical band gap of TiO2 nanoparticles10.1016/j.matdes.2015.12.022 ↗
66. Construction of Ni doped MoO3 nanostructures and their application as counter electrode in dye-sensitized solar cells10.1016/j.inoche.2021.109079 ↗
67. Structural evolution and phase transition of [NH4]6Mo7O24.4H2O to 2D layered MoO3-x
68. Characterization and antibacterial activity study of hydrothermally synthesized h-MoO3 Nanorods and α-MoO3 Nanoplates10.1007/s12668-019-00671-7 ↗
69. Exploring burstein-moss type effects in nickel doped hematite dendrite nanostructures for enhanced photo-electrochemical water splitting10.1039/C9CP04132J ↗