journal article·2020-08-01Open access

Phase assemblage and wear resistance of laser-cladding Al0.8FeCoNiCrCu0.5Six high-entropy alloys on aluminum

Yanzhou Li, Yan Shi

Materials Research Express· Volume 7· Issue 8

Abstract

Abstract Preparing a coating with excellent mechanical properties on aluminum substrates by laser cladding has always been challenging because of the low melting point and high chemical activity of Al. In this study, we designed Al0.8FeCoNiCrCu0.5Six (x = 0, 0.2, 0.3, 0.4, and 0.5) high-entropy alloys (HEAs) as cladding materials. The proposed study aims to exploit the unique high-entropy effect of HEAs to restrict the the formation of hard and brittle intermetallic compounds via the reaction between Al in the substrate and added powders, thereby enhancing the quality of the formed coatings and ultimately improving the surface properties of the Al alloy. Results show that with an increase in the Si content, the structure of the Al0.8CrFeCoNiCu0.5Six coating changes from FCC + BCC1 + BCC2 to BCC1 + BCC2. The hardness of the Al0.8FeCoNiCrCu0.5Six coating first increases and then decreases with an increase in the Si content. The coatings with the highest and lowest hardness were those with compositions of Al0.8FeCoNiCrCu0.5Si0.4 (592HV0.2) and Al0.8FeCoNiCrCu0.5 (412HV0.2), respectively, which is approximately seven and five times greater than that of the substrate, respectively. The effect of Si content on the wear resistance of the coating is the same as its effect on the hardness. The wear rates of coatings with different Si contents range from 1.19 × 10−6 mm3 Nm−1 to 8.99 × 10−7 mm3 Nm−1 and are only 0.34% to 0.25% of the substrate. Obvious, the Al0.8FeCoNiCrCu0.5Six HEAs can be used as coating materials to improve the mechanical properties of an Al alloy surface.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Anisotropic mechanical properties of columnar and equiaxed A6005C aluminum alloys fabricated by capillary shaping10.2320/matertrans.MG201806 ↗
2. Microstructure and compressive properties of aluminum foams made by 6063 aluminum alloy and pure aluminum10.2320/matertrans.M2017300 ↗
3. Welding of thin sheet of Al5456 aluminum alloy by using GTA and GMA welding process10.1088/2053-1591/ab0d48 ↗
4. Flow softening behavior and microstructure evolution of aluminum alloy 6061 due to dynamic recovery10.1088/2053-1591/ab0628 ↗
5. Analysis of geometrical characteristics and properties of laser cladding 85 wt.% Ti+15 wt.% TiBCN powder on 7075 aluminum alloy substrate10.3390/ma11091551 ↗
6. Effects of CeO2 on the microstructure and tribological properties of atmospheric plasma-sprayed Cr2O3–TiO2 coatings10.1108/ILT-06-2019-0229 ↗
7. Electrosynthesis of Zr-loaded copolymer coatings on Al for defluoridation of water and its corrosion protection ability10.1016/j.porgcoat.2019.04.039 ↗
8. Facile fabrication of superhydrophobic aluminum surfaces by chemical etching and its anti-icing/self-cleaning performances10.1088/2053-1591/ab3173 ↗
9. Microstructure and mechanical properties of Co-based alloy coatings fabricated by laser cladding and plasma arc spray welding10.1016/j.jallcom.2019.01.056 ↗
10. Microstructure and tribological properties of laser cladded TiAlSi composite coatings reinforced by yttria-stabilized zirconia10.1088/2053-1591/ab445e ↗
11. Microstructure and tribological behavior of laser cladding TiAlSi composite coatings reinforced by alumina–titania ceramics on Ti–6Al–4V alloys10.1016/j.matchemphys.2019.122271 ↗
12. Microstructural evolution and wear behaviors of NbC-reinforced Ti-based composite coating10.1007/s00170-020-05198-w ↗
13. Modeling of thermal behavior and microstructure evolution during laser cladding of AlSi10Mg alloys10.1016/j.optlastec.2019.105926 ↗
14. Microstructure of laser-clad Ni60 cladding layers added with different amounts of rare-earth oxides on 6063 Al alloys10.1016/j.jallcom.2018.01.061 ↗
15. Microstructure and properties of Ti/TiBCN coating on 7075 aluminum alloy by laser cladding10.1016/j.surfcoat.2017.11.034 ↗
16. Effect of CeO2 addition on interface structure and corrosion resistance of laser cladding additive manufactured Ni60 alloy layers on the surface of Al alloys
17. Role of laser cladding parameters in composite coating (Al-SiC) on aluminum alloy10.1007/s11666-016-0431-7 ↗
18. Yeh · Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes · 2004 · 6 · 29910.1002/adem.200300567 ↗
19. Microstructural characterization and mechanical properties of an Al0.5CoCrFeCuNi high-entropy alloy in as-cast and heat-treated/quenched conditions10.1016/j.msea.2013.01.006 ↗
20. Deformation mechanism of a high-entropy alloy CoCrFeMnNi at intermediate high temperatures investigated by stress relaxation10.1088/2053-1591/aaf7b6 ↗
21. Effect of solidification rate on the microstructure and strain-rate-sensitive mechanical behavior of AlCoCrFeNi high-entropy alloy prepared by bridgman solidification10.2320/matertrans.M2018380 ↗
22. Increasing the creep resistance of Fe–Ni–Al–Cr superalloys via Ti additions by optimizing the B2/L2(1) ratio in composite nano-precipitates10.1016/j.actamat.2018.07.025 ↗
23. Effect of microalloying with silicon on high temperature oxidation resistance of novel refractory high-entropy alloy Ta–Mo–Cr–Ti–Al10.1080/09603409.2017.1389115 ↗
24. High strength dual-phase high entropy alloys with a tunable nanolayer thickness10.1016/j.scriptamat.2019.08.018 ↗
25. In-situ TiC reinforced CoCrCuFeNiSi0.2 high-entropy alloy coatings designed for enhanced wear performance by laser cladding10.1016/j.matchemphys.2019.122522 ↗
26. Reinforcement and substrate interaction in laser surface forming of AlCoCrCuFeNi particle reinforced AZ91D matrix composites10.1016/j.jallcom.2016.02.191 ↗
27. Influence of Al and Cu elements on the microstructure and properties of (FeCrNiCo)AlxCuy high-entropy alloys10.1016/j.jallcom.2014.06.090 ↗
28. Microstructure-corrosion property correlation in electrodeposited AlCrFeCoNiCu high entropy alloys-graphene oxide composite coatings10.1016/j.tsf.2019.137434 ↗
29. Microstructure and properties of laser clad high-entropy alloy coating on aluminium10.1080/02670836.2018.1444921 ↗
30. Analysis of Si addition on phase formation in AlCoCrCuFeNiSix high entropy alloys10.1016/j.matlet.2016.10.099 ↗
31. Characterization of Al0.5FeCu0.7NiCoCr high-entropy alloy coating on aluminum alloy by laser cladding10.1016/j.optlastec.2018.01.058 ↗
32. On the microstructures, phase assemblages and properties of Al0.5CoCrCuFeNiSix high-entropy alloys10.1016/j.jallcom.2014.11.085 ↗
33. Modified criterions for phase prediction in the multi-component laser-clad coatings and investigations into microstructural evolution/wear resistance of FeCrCoNiAlMox laser-clad coatings10.1016/j.apsusc.2018.08.264 ↗
34. Tong · Microstructure Characterization of AlxCoCrCuFeNi High-Entropy Alloy System with Multiprincipal Elements · 2004 · 36 · 88110.1007/s11661-005-0283-0 ↗
35. Formation of lubricated tribo layer, grain boundary precipitates, and white spots on titanium-coated graphite-reinforced hybrid composites10.1007/s41779-018-0274-4 ↗