Structural, optical and conductivity study of hydrothermally synthesized TiO2 nanorods
Source abstract
Abstract
Abstract TiO2 nanorods are synthesized by hydrothermal method using the commercially available TiO2 nanopowder (P25) as a precursor. This work mainly focused on the study of the various properties and comparison among the P25, 20 mg TiO2 nanorods and 40 mg TiO2 nanorods by different characterizations. Fourier Transform Infrared Spectroscopy (FTIR) was carried out and the results confirmed the formation and presence of TiO2 nanorods by shifting peak positions from 1433 cm−1 to 1424cm−1 and 1420cm−1. The x-ray diffraction (XRD) results indicate that the crystallinity of TiO2 nanorods increased significantly and was confirmed by the variation in the diffraction peak intensity and the peak at 2θ = 25.23° is conformed the anatase phase. The Field Emission Scanning Electron Microscope (FESEM) images clearly show the formation and presence of TiO2 nanorods. Thermogravimetric Analysis (TGA) and Differential Thermal Analysis (DTA) reveal that increasing in thermal stability and differential scanning calorimeter (DSC) evaluates the increase in melting temperature of TiO2 nanorods. The UV–vis absorption spectra show the absorption peak redshift towards higher wavelength and it leads to expansion of optical activities of TiO2 nanorods. The optical band gap energy was found to be decreased to 5.3, 5.2 and 4.9 eV for P25, 20 and 40 mg respectively. The dielectric constant has increased twice and the dielectric loss by almost ten times compared to dielectric constant and dielectric loss of the P25. The current versus voltage (I-V) characteristics show the linear curve which reveals the easy flow of current is more in TiO2 nanorods. From the obtained results, it could be concluded that TiO2 nanorods are suitable for potential applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Nanomaterials in Catalysis · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Improved separation and antifouling performance of PVA thin film nanocomposite membranes incorporated with carboxylated TiO2 nanoparticles10.1016/j.memsci.2015.03.009 ↗
2. Titanium dioxide and zinc oxide as a dielectric material for application in TFT’s10.1016/j.matpr.2017.12.370 ↗
3. TiO2 as a low cost, multi functional material10.1016/j.matpr.2016.01.006 ↗
4. Recent advances in syntheses, properties and applications of TiO2 nanostructures10.1039/C8RA06517A ↗
5. Applications of titanium dioxide nanoparticles
6. Effect of hydrothermal temperature on photocatalytic properties of TiO2 nanotubes10.1016/j.cap.2013.12.018 ↗
7. A review on the formation of titania nanotube photocatalysts by hydrothermal treatment10.1016/j.jenvman.2011.03.006 ↗
8. Synthesis and characterization of ZnO–CuO nanocomposites powder by modified perfume spray pyrolysis method and its antimicrobial investigation10.1088/1674-4926/39/3/033001 ↗
9. Effect of TiO2 nanoparticles doping on structural and electrical properties of PVA: NaBr polymer electrolyte10.1063/1.5032551 ↗
10. Improved separation and antifouling performance of PVA thin film nanocomposite Membranes incorporated with carboxylated TiO2 nanoparticles10.1016/j.memsci.2015.03.009 ↗
11. Structural and optical properties of TiO2 nanoparticles/PVA for different composites thin films
12. Preparation of PVA/TiO2 composites nanofibers by using electrospinning method for photocatalytic degradation10.1088/1757-899X/202/1/012011 ↗
13. Effect of reaction time on the formation of TiO2 nanotubes prepared by hydrothermal method10.1016/j.ijleo.2015.06.022 ↗
14. Hydrothermal synthesis of single-crystalline anatase TiO2 nanorods with nanotubes as the precursor10.1021/jp0567321 ↗
15. Preparation and characterization of epitaxial growth of ZnO nanotip arrays by hydrothermal method10.1016/j.jcis.2012.12.031 ↗
16. Characterization, electrical conductivity and electrochemical performance of polyaniline-LiClO4-CuO nano composite for energy storage applications10.1080/03602559.2018.1466175 ↗
17. The effects of atmosphere and calcined temperature on photocatalytic activity of TiO2 nanofibers prepared by electrospinning10.1186/1556-276X-8-548 ↗
18. Visible-light photocatalytic activity of N-doped TiO2 nanotube arrays on acephate degradation10.1155/2015/527070 ↗
19. Effects of surface modification of TiO2 nanotube arrays on the performance of CdS quantum-dot-sensitized solar cells10.1155/2013/129621 ↗
20. Investigation of the structure, optical and electrical properties of lithium perchlorate doped polyaniline composite: aloe vera used as a bio-plasticizer10.1007/s11664-017-5724-1 ↗
21. Preparation of anatase TiO2/Ti nanotube-like electrodes and their high photoelectrocatalytic activity for the degradation of PCP in aqueous solution10.1016/j.apcata.2005.12.016 ↗
22. Electron beam irradiated polymer electrolyte film: morphology, dielectric and AC conductivity studies10.1063/1.5032661 ↗
23. Dielectric properties and characterisation of titanium dioxide obtained by different chemistry methods10.1155/2014/124814 ↗
24. Synthesis and electrical properties of TiO2 nanoparticles embedded in polyamide-6 nanofibers via electrospinning10.1007/BF0335365 ↗