Molecular dynamics study on the effects of nanorolling processes on the properties of nickel-based superalloy GH4169
Source abstract
Abstract
Abstract Rolling is a process that can improve the performance and roughness of machined parts and has a special economic value; therefore, the optimization of rolling process parameters is crucial to workpiece performance. In this paper, three rolling methods are used in molecular dynamics (MD) rolling simulations to study their effects on the surface of nickel-based superalloy GH4169 at the nanoscale. The surface and subsurface of the workpiece after rolling with the three different rolling methods are studied separately; in particular, a comparative analysis of the dislocation generation and movement on the subsurface, crystal defect evolution, and surface roughness was performed. The results show that the increase in subsurface dislocation density by average rolling has a significant influence on the work hardening effect, and the average roughness of the rolled groove surface is the lowest. This is an important reference for the optimization of the parameters of actual rolling processes.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Microstructure and mechanical properties · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Effects of ball burnishing parameters on surface finish—A literature survey and discussion10.1016/0141-6359(88)90056-6 ↗
2. Enhanced fatigue resistance of Cu with a gradient nanograined surface layer10.1016/j.scriptamat.2013.01.031 ↗
3. Fatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer10.1016/j.actamat.2014.12.057 ↗
4. Simultaneous enhancement of stress- and strain-controlled fatigue properties in 316L stainless steel with gradient nanostructure10.1016/j.actamat.2019.02.008 ↗
5. The effect of ultrasonic surface rolling process on the fretting fatigue property of GH4169 superalloy10.1016/j.ijfatigue.2019.105373 ↗
6. Effect of cold rolling parameters on the longitudinal residual stress distribution of GH4169 alloy sheet10.1007/s40195-015-0351-4 ↗
7. Influence of delta phase precipitation on static recrystallization of cold-rolled Inconel 718 alloy in solid solution treatment10.1007/s42243-018-0219-8 ↗
8. Creep rupture life prediction of nickel-based superalloys based on data fusion10.1016/j.commatsci.2022.111560 ↗
9. Effect of crystal orientation on the indentation behaviour of Ni-based single crystal superalloy10.1016/j.msea.2019.138893 ↗
10. Experimental research on cryogenic cutting performance of Ni-based superalloy GH416910.1007/s00170-022-09325-7 ↗
11. Effect of cross wedge rolling on the microstructure of GH4169 alloy10.1007/s12613-012-0636-9 ↗
12. Influence of ball-burnishing on roughness, hardness and corrosion resistance of AISI 1045 steel10.1016/j.surfcoat.2018.02.013 ↗
13. Influence of burnishing process on surface roughness, hardness, and microstructure of some non-ferrous metals10.1016/0043-1648(95)06847-3 ↗
14. A study of the effects of ball-burnishing parameters on surface roughness using factorial design10.1016/0378-3804(89)90109-5 ↗
15. Deep surface rolling for fatigue life enhancement of laser clad aircraft aluminium alloy10.1016/j.apsusc.2014.09.139 ↗
16. Surface improvement of shafts by the deep ball-burnishing technique10.1016/j.surfcoat.2011.11.045 ↗
17. An investigation into roller burnishing10.1016/S0890-6955(00)00019-5 ↗
18. Determination of optimal small ball-burnishing parameters for both surface roughness and superficial hardness improvement of STAVAX10.1007/s13369-015-1710-1 ↗
19. Modeling and simulation of nanoindentation10.1007/s11837-017-2541-1 ↗
20. Molecular dynamics simulation of ion-implanted single-crystal 3C-SiC nano-indentation10.1016/j.jmapro.2022.04.071 ↗
21. Research on the nanometric machining of a single crystal nickel via molecular dynamics simulation10.1007/s11431-016-0251-y ↗
22. A numerical study of ultraprecision machining of monocrystalline silicon with laser nano-structured diamond tools by atomistic simulation10.1016/j.apsusc.2016.10.014 ↗
23. A numerical study of residual stress induced in machined silicon surfaces by molecular dynamics simulation10.1007/s00339-013-7977-8 ↗
24. Molecular dynamics study on friction due to ploughing and adhesion in nanometric scratching process10.1007/s11249-010-9681-6 ↗
25. Molecular dynamics simulation of subsurface deformed layers in AFM-based nanometric cutting process10.1016/j.apsusc.2008.01.096 ↗
26. Influence of anisotropy of nickel-based single crystal superalloy in atomic and close-to-atomic scale cutting10.1016/j.precisioneng.2020.07.005 ↗
27. Research on the mechanism of surface damage of Ni-based high-temperature alloy GH4169 based on nano-cutting10.1016/j.vacuum.2021.110439 ↗
28. Study on staged work hardening mechanism of nickel-based single crystal alloy during atomic and close-to-atomic scale cutting10.1016/j.precisioneng.2020.11.005 ↗
29. Work hardening mechanism based on molecular dynamics simulation in cutting Ni–Fe–Cr series of Ni-based alloy10.1016/j.jallcom.2019.153331 ↗
30. Interatomic potential for studying ageing under irradiation in stainless steels: the FeNiCr model alloy10.1088/0965-0393/21/8/085004 ↗
31. Embedded-atom method: derivation and application to impurities, surfaces, and other defects in metals10.1103/PhysRevB.29.6443 ↗
32. Semiempirical, quantum mechanical calculation of hydrogen embrittlement in metals10.1103/PhysRevLett.50.1285 ↗
33. Diffusion mechanism of tools and simulation in nanoscale cutting the Ni–Fe–Cr series of Nickel-based superalloy10.1016/j.ijmecsci.2018.10.058 ↗
34. Molecular dynamics simulation study of interaction mechanism between grain boundaries and subgrain boundaries in nano-cutting10.1016/j.jmapro.2021.04.075 ↗
35. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
36. Shadow hamiltonian in classical NVE molecular dynamics simulations involving coulomb interactions10.1063/5.0048194 ↗
37. Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
38. Effects of electropulsing on the machinability and microstructure of GH4169 superalloy during turning process10.1007/s00170-017-1407-6 ↗
39. The role of collinear interaction in dislocation-induced hardening10.1126/science.1085477 ↗
40. Extracting dislocations and non-dislocation crystal defects from atomistic simulation data10.1088/0965-0393/18/8/085001 ↗
41. Automated identification and indexing of dislocations in crystal interfaces10.1088/0965-0393/20/8/085007 ↗
42. Study on the evolution mechanism of subsurface defects in nickel-based single crystal alloy during atomic and close-to-atomic scale cutting10.1016/j.jmapro.2021.07.013 ↗
43. Effects of Fe atoms on hardening of a nickel matrix: Nanoindentation experiments and atom-scale numerical modeling10.1016/j.matdes.2022.110639 ↗
44. Subsurface defects structural evolution in nano-cutting of single crystal copper10.1016/j.apsusc.2015.03.061 ↗
45. Mechanisms of subsurface damage and material removal during high speed grinding processes in Ni/Cu multilayers using a molecular dynamics study10.1039/C7RA06975H ↗
46. The effect of anisotropy of nickel-based single crystal alloys on the surface quality of sub-nanometer and near atomic scale cutting10.1016/j.intermet.2022.107536 ↗
47. Molecular dynamics study of melting and freezing of small Lennard-Jones clusters10.1021/j100303a014 ↗
48. Systematic analysis of local atomic structure combined with 3D computer graphics10.1016/0927-0256(94)90109-0 ↗
49. Dislocation nucleation and defect structure during surface indentation10.1103/PhysRevB.58.11085 ↗
50. Structural characterization of deformed crystals by analysis of common atomic neighborhood10.1016/j.cpc.2007.05.018 ↗
51. Atomic-scale dynamic process of deformation-induced stacking fault tetrahedra in gold nanocrystals10.1038/ncomms3340 ↗
52. Plastic flow and dislocation strengthening in a dislocation density based formulation of plasticity10.1016/j.commatsci.2018.04.065 ↗
53. Atom probe informed simulations of dislocation–precipitate interactions reveal the importance of local interface curvature10.1016/j.actamat.2015.03.050 ↗
54. Atomic surface roughness10.1063/1.122839 ↗
55. Modeling and measurements of atomic surface roughness10.1364/AO.39.002705 ↗