journal article·2023-08-01Open access

Recent advances in mitigating fusion zone softening during laser welding of Al-Si coated 22MnB5 press-hardened steels

Muhammad Shehryar Khan

Materials Research Express· Volume 10· Issue 8

Abstract

Abstract The automotive industry is seeking reduced vehicle weight and improved safety of newer generation vehicles to meet global zero-emission targets. Tailor-welded blanks offer a solution to meet this demand by producing lightweight yet strong components, such as the B-pillar, using laser-welded press-hardened steels. The laser welding of Al-Si coated PHSs causes the coating to be diluted into the melt pool which can cause premature failure due to the presence of a softer ferrite phase in an otherwise martensitic joint. Currently, laser ablation is used to remove the Al-Si layer prior to welding, but other techniques have been proposed which can potentially bypass the need to remove the coating and instead, welding directly through the coating. This study examines the problem of fusion zone softening during the laser welding of Al-Si coated 22MnB5 and discusses recently proposed novel solutions that can solve the issue without the prior removal of the Al-Si coating before welding or using expensive filler materials during welding. The paper concludes with several viable recommendations for future work that can be used as potential directions for further research.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · High Entropy Alloys Studies · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (85)

Show source-provided references
1. The effect of zinc coating type on the morphology, joint geometry, and mechanical properties of weld-brazed thin-gauge automotive steel10.1007/s11661-022-06857-1 ↗
2. Recent advances in the transformative non-fusion weld-brazing process used to join thin-gauge alloys used in the automotive industry10.1007/978-3-031-22524-6_40 ↗
3. Improving heat-affected zone softening of aluminum alloys by in situ cooling and post-weld rolling10.1016/j.jmatprotec.2022.117639 ↗
4. Effect of torch angle and position on bead geometry and joint strength during arc brazing of thin gauge dual-phase steel10.1007/s00170-022-09309-7 ↗
5. Weld-brazing or welding-brazing: addressing the inconsistency in the naming convention used for this transformative non-fusion joining technique10.1016/j.mfglet.2023.02.002 ↗
6. Effect of gap clearance on the mechanical properties of weld-brazed lap joints10.1016/j.mfglet.2022.11.002 ↗
7. Fusion zone microstructural evolution of Al-10% Si coated hot stamping steel during laser welding10.2355/isijinternational.ISIJINT-2018-489 ↗
8. Optimizing the pulse wave mode low power fibre laser welding parameters of 22Mnb5 boron steel using response surface methodology10.1016/j.measurement.2018.10.035 ↗
9. Effect of heating parameters on laser welded tailored blanks of hot press forming steel10.1016/j.jmatprotec.2015.06.028 ↗
10. Novel forming technology for tailor-welded blanks10.1016/S0924-0136(99)00412-4 ↗
11. Hot stamping of boron steel sheets with tailored properties: a review10.1016/j.jmatprotec.2015.09.023 ↗
12. A review on the laser welding of coated 22MnB5 press-hardened steel and its impact on the production of tailor-welded blanks10.1080/13621718.2020.1742472 ↗
13. Fiber laser welding of AlSi coated press hardened steel
14. Laser welding of Al-Si coated hot stamping steel10.1016/j.proeng.2011.04.368 ↗
15. Comparison of microstructure and phase transformation of laser-welded joints in Al-10wt%Si-coated boron steel before and after hot stamping10.1016/j.matchar.2017.02.007 ↗
16. Kou · 2003
17. Fusion zone microstructure evolution of fiber laser welded press-hardened steels10.1016/j.scriptamat.2016.04.032 ↗
18. Suppression of δ-ferrite formation on Al-Si coated press-hardened steel during laser welding10.1016/j.matlet.2019.02.111 ↗
19. Effect of filler wire on laser lap welding of Al-Si coated 22MnB5 hot stamping steel10.1007/s11665-022-07057-z ↗
20. Effect of Al-Si coating removal state on microstructure and mechanical properties of laser welded 22MnB5 steel10.1007/s11665-022-07401-3 ↗
21. Effect of oscillation frequency on the mechanical properties and failure behaviors of laser beam welded 22MnB5 weld10.1016/j.jmrt.2022.12.013 ↗
22. Effects of laser beam oscillation welding parameters on Al-Si coated 22MnB5 weld joint properties10.1016/j.optlastec.2022.107898 ↗
23. Effect of Al-Si coating on weld microstructure and properties of 22MnB5 steel joints for hot stamping10.1007/s11665-018-3259-0 ↗
24. Development of a laser decoating process for fully functional Al-Si coated press hardened steel laser welded blank solutions
25. A study on mechanical properties of laser-welded blank of a boron sheet steel by laser ablation variable of Al-Si coating layer10.1007/s12541-013-0039-5 ↗
26. Laser tailor-welded blanks for hot-press-forming steel with arc pretreatment10.1007/s12239-015-0029-y ↗
27. Briand · Process for Laser-arc Hybrid Welding Aluminized Metal Workpieces, U.S. Patent 9 · 2017 · 616 · 527
28. Influence of Al-Si coating on microstructure and mechanical properties of fiber laser welded 22MnB5 steel10.1016/j.optlastec.2019.03.024 ↗
29. Effect of filler wire on laser welded blanks of Al-Si-coated 22MnB5 steel10.1016/j.jmatprotec.2018.04.041 ↗
30. Flow behaviors of 22MnB5 steel at a high temperature10.1088/2053-1591/ab131d ↗
31. Effects of trace Ce addition on critical cooling rate and Ti (CN) precipitation of ultra high strength steel plate10.1088/2053-1591/abc12b ↗
32. Effect of quenching temperature on the microstructure and mechanical properties of 30MnBNbV hot stamping steel10.1088/2053-1591/ab41ca ↗
33. On the ductile-brittle transition in lath martensitic steel10.2355/isijinternational.51.1569 ↗
34. Microstructure, mechanical properties and tear toughness of laser-welded DP980 dual phase steel10.1088/2053-1591/aca5f1 ↗
35. Investigation on microstructure and impact toughness of simulated heat affected zone of high strength low alloy steels by laser-arc hybrid welding10.1088/2053-1591/ac93e9 ↗
36. The impact of laser impingement angle on process stability and weld geometry during high-speed laser welding of automotive steels
37. The effect of laser impingement angle on the optimization of melt pool geometry to improve process stability during high-speed laser welding of thin-gauge automotive steels10.1016/j.jmapro.2022.04.022 ↗
38. Effects of laser beam defocusing on high-strain-rate tensile behavior of press-hardened Zn-coated 22MnB5 steel welds10.1016/j.optlastec.2021.107116 ↗
39. Numerical modelling and experimental validation of the effect of laser beam defocusing on process optimization during fiber laser welding of automotive press-hardened steels10.1016/j.jmapro.2021.05.006 ↗
40. Tensile and fatigue properties of fiber laser welded high strength low alloy and DP980 dual-phase steel joints10.1016/j.matdes.2012.07.017 ↗
41. Microstructure and fatigue properties of fiber laser welded dissimilar joints between high strength low alloy and dual-phase steels10.1016/j.matdes.2013.04.076 ↗
42. Effects of concavity on tensile and fatigue properties in fibre laser welding of automotive steels10.1179/1362171813Y.0000000163 ↗
43. Effect of coating on fiber laser welded joints of DP980 steels10.1016/j.matdes.2015.10.098 ↗
44. Optimizing weld morphology and mechanical properties of laser welded Al-Si coated 22MnB5 by surface application of colloidal graphite10.1016/j.jmatprotec.2021.117093 ↗
45. The influence of in situ alloying of electro-spark deposited coatings on the multiscale morphological and mechanical properties of laser welded Al-Si coated 22MnB510.1016/j.msea.2022.142830 ↗
46. α-ferrite suppression during fiber laser welding of Al-Si coated 22MnB5 press-hardened steel10.29391/2021.100.018 ↗
47. Refining the hierarchical structure of lath martensitic steel by in situ alloying with nickel: morphology, crystallography, and mechanical properties10.1007/s10853-022-07916-z ↗
48. Shehryar Khan · 2023
49. Hot stamping of ultra high strength steels
50. Heat treatable and surface hardening steels for vehicle and machine construction
51. A review on hot stamping10.1016/j.jmatprotec.2010.07.019 ↗
52. Liquid metal embrittlement in laser beam welding of Zn-coated 22MnB5 steel10.1016/j.matdes.2018.05.065 ↗
53. An investigation of the blanking process of the quenchable boron alloyed steel 22MnB5 before and after hot stamping process10.1016/j.jmatprotec.2011.10.006 ↗
54. Influence of Al–Si coating on microstructure and mechanical properties of fiber laser welded and then press-hardened 22MnB5 steel10.1016/j.msea.2020.139918 ↗
55. The finite element analysis of austenite decomposition during continuous cooling in 22MnB5 steel10.1088/0965-0393/22/6/065005 ↗
56. Evolution of mechanical properties of boron/manganese 22MnB5 steel under magnetic pulse influences10.1088/1757-899X/110/1/012107 ↗
57. Intercritical annealing of 22MnB5 for hot forming Die Quenching10.1088/1757-899X/418/1/012010 ↗
58. Effect of strain rate on formability of 22MnB5 steel during hot stamping process10.1088/1757-899X/1157/1/012022 ↗
59. Upset bulging as a preforming operation for hot metal gas forming of 22MnB5 tubes10.1088/1757-899X/1238/1/012016 ↗
60. Effect of coating on hydrogen embrittlement of hot stamping 22MnB5 high strength steel during electrochemical charging10.1088/1757-899X/1270/1/012071 ↗
61. The distribution of boron in austenite10.1007/BF02652863 ↗
62. Metal Science surface and grain-boundary energies of AISI 316 stainless steel in the presence of boron10.1179/msc.1976.10.9.326 ↗
63. A review of the physical metallurgy related to the hot press forming of advanced high strength steel
64. The history of hardening of boron steel in northern Sweden
65. Corrosion resistance of different metallic coatings on press-hardened steels for automotive10.1002/srin.201000291 ↗
66. Development of pre-coated boron steel for applications on PSA peugeot citroën and RENAULT bodies in white10.2307/44718720 ↗
67. High-temperature phase evolution of the ZnAlMg coating and its effect on mitigating liquid-metal-embrittlement cracking10.1016/j.actamat.2022.117836 ↗
68. Investigating zinc-assisted liquid metal embrittlement in ferritic and austenitic steels: correlation between crack susceptibility and failure mechanism10.1016/j.matchar.2022.112502 ↗
69. Effect of Zn-coating type on intergranular Cu-penetration in steels during weld-brazing10.1016/j.matlet.2023.134442 ↗
70. State-of-the-knowledge on coating systems for hot stamped parts10.1002/srin.201100292 ↗
71. A review on metallurgical features of hot-dip aluminized steel10.1088/2631-8695/acb902 ↗
72. Effect of heat input on HAZ softening in fiber laser welding of 22MnB5 steel10.1016/j.optlastec.2023.109560 ↗
73. Fiber laser welding of AlSi coated press hardened steel
74. Microstructural features and mechanical properties of 22MnB5 hot stamping steel in different heat treatment conditions10.1016/j.jmrt.2020.07.043 ↗
75. Improving the mechanical properties of PHS laser welded joints by adding Ni foil to suppress δ-ferrite10.1016/j.jmrt.2020.03.035 ↗
76. Effect of galvanneal-coating evolution during press-hardening on laser welding of 22MnB5 steel10.1080/13621718.2019.1639271 ↗
77. A novel micromechanical-based secant method to predict the elastoplastic constitutive relation of a tailor-tempered 22MnB5 sheet10.1016/j.mtcomm.2022.103236 ↗
78. Guidelines in the experimental validation of a 3D heat and fluid flow model of keyhole laser welding10.1088/0022-3727/49/15/155503 ↗
79. Effect of keyhole mode on weld shape and mechanical properties of thin sheets of Al-Si coated 22MnB5 steel10.2351/1.5052155 ↗
80. Zhou · Pre-Coated Steel Sheet Comprising an Additional Coating for Increasing The Mechanical Strength of the Weld Metal Zone of a Welded Steel Part Prepared From Said Pre-Coated Sheet · 2021
81. The segregation control of coating element for pulse fiber laser welding of Al-Si coated 22MnB5 steel10.1016/j.jmatprotec.2020.116833 ↗
82. Laser welding of tailored blanks made of Al-Si-coated 22MnB5 steel using a filler wire and a variable energy distribution laser optics10.1007/s00170-023-10921-4 ↗
83. Effect of welding speed on microstructure and mechanical behavior of laser welded Al-Si coated 22MnB5 steel10.1016/j.optlastec.2022.108344 ↗
84. Wear characteristics of austenitic steel and martensitic steel at high temperature10.1088/2053-1591/ac86b9 ↗
85. Correlation of microstructure and strain hardening behavior in the ultrafine-grained Nb-bearing dual phase steels10.1016/j.msea.2016.09.108 ↗