Optimization of WEDM parameters for Mg-Zn-RE-Zr alloy using Passing Vehicle Search algorithm
Source abstract
Abstract
Abstract Wire Electric Discharge Machining (WEDM) is a high precision spark machining capable of cutting electrically conductive materials of varying hardness and/or having complex shapes. Since the last decade, focus has increased on magnesium alloys because of their high specific strength and inelasticity, excellent damping properties. The addition of Rare Earth (RE) improves creep and corrosion resistant properties thus rendering them highly useful for several aerospace applications. In the present study, parametric optimization of WEDM on Mg-Zn-RE-Zr alloy is performed using a novel meta-heuristic algorithm-Passing Vehicle Search (PVS). The control parameters considered are current, pulse-on time, pulse-off time and wire feed rate. Response Surface Methodology (RSM) philosophy is implemented through Central Composite Design (CCD) to formulate the mathematical model of Average Surface Roughness (Ra). The adequacy of obtained quadratic model is established using Analysis of Variance (ANOVA). The PVS algorithm employs a population based search method by emulating the algebraic characteristics of vehicles over-taking on a two-lane highway from an initial solution set. Results of optimization through PVS are compared against standard real coded Genetic Algorithm. A remarkable improvement was observed which is critical while considering aerospace standards. This kind of analysis could be useful for production process planning in the aerospace industry.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Machining and Optimization Techniques · Aluminum Alloys Composites Properties · Surface Treatment and Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Multi response optimization of wire-EDM process parameters of ballistic grade aluminium alloy10.1016/j.jestch.2015.05.004 ↗
2. Multi-factor experimental designs for exploring response Surfaces10.1214/aoms/1177707047 ↗
3. Economical and environmental factors in light alloys automotive applications10.1007/s11661-007-9156-z ↗
4. Magnesium — an old material with new applications10.1016/0261-3069(91)90071-B ↗
5. The effect of alloy composition on the microstructure and tensile properties of binary Mg-rare earth alloys10.1016/j.intermet.2008.12.009 ↗
6. Life cycle inventory study on magnesium alloy substitution in vehicles10.1016/j.energy.2006.10.020 ↗
7. Tackling real-coded genetic algorithms: operators and tools for behavioural analysis10.1023/A:1006504901164 ↗
8. Magnesium: commodity or exotic?10.1179/174328407X154374 ↗
9. A Study on the machining-parameters optimization of wire electrical discharge machining10.1016/S0924-0136(97)00117-9 ↗
10. Montgomery · 2012
11. Myers · 2016
12. Nicoară · 2007
13. Machining parameter optimization for EDM machining of Mg–RE–Zn–Zr alloy using multi-objective passing vehicle search algorithm10.1016/j.acme.2017.12.007 ↗
14. Effects of solid lubricants, load, and sliding speed on the tribological behavior of silica reinforced composites using design of experiments10.1016/j.matdes.2015.03.059 ↗
15. Effect of synthetic graphite and activated charcoal addition on the mechanical, microstructure and wear properties of AZ 81 Mg alloys10.1016/j.jmrt.2015.12.001 ↗
16. Ram Prabhu · 2017 · 310.1007/978-981-10-2134-3_1 ↗
17. Multi response optimization of wire EDM operations using robust design of experiments10.1007/s00170-004-2496-6 ↗
18. Multi-objective optimization of edm process parameters by using passing vehicle search (PVS) algorithm10.4028/www.scientific.net/DDF.382.138 ↗
19. Passing vehicle search (PVS): a novel metaheuristic algorithm10.1016/j.apm.2015.10.040 ↗
20. Titanium-aluminium-niobium alloy, development for biocompatible, high strength surgical implants - titan-aluminium-niob-legierung, entwickeltfürkörperverträgliche, hochfesteimplantate in der chirurgie10.1515/bmte.1985.30.12.334 ↗
21. Evaluation of WEDM performance characteristics of inconel 706 for turbine disk application10.1016/j.matdes.2015.09.036 ↗
22. Optimization of micro-WEDM process of aluminum matrix composite (A413-B4C): a response surface approach10.1080/10426914.2013.823502 ↗
23. Failure analysis and optimization of thermo-mechanical process parameters of titanium alloy (Ti–6Al–4V) fasteners for aerospace applications10.1016/j.csefa.2013.04.003 ↗
24. Modeling and optimization of medium-speed wedm process parameters for machining SKD1110.1080/10426914.2013.773024 ↗