The effect of travertine waste on the strength and insulation properties of foam concrete
Source abstract
Abstract
Abstract Incorporating waste additives into foam concrete mixtures is a promising route to develop environmentally-friendly concrete production with tailored thermos-mechanical properties. In this paper, the effects of various fabrication parameters of foam concrete, including the type of waste additive, water/binder ratio, density of mixture, and incorporation of glass fibers were investigated. Foam concrete samples were fabricated using fly ash and travertine wastes, and the variations in their compressive strength, and thermal conductivity using various concrete mixture designs were measured. The obtained results show that foam concrete with fly ash additive tends to have higher compressive strength and thermal conductivity than foam concrete with travertine waste. However, the latter exhibits better thermal insulation properties, which tend to improve by adding glass fibers. This work defines the outlines for exploring the use of harmful wastes in fabricating foam concrete. It offers guidelines for developing improved foam concrete mixtures with tailored thermos-mechanical properties.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Bone Tissue Engineering Materials · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. ASTM C618–23 · 2023
2. Mermer atıklarından köpük beton blok üretimi
3. Mechanical and durability properties of fibre lightweight foamed concrete
4. Engineering properties of concrete with waste recycled plastic: a review10.3390/su10113875 ↗
5. Investigation into the air void characteristics of foamed concrete. Use of foamed concrete in construction
6. Experimental research on properties of high-strength foamed concrete10.1061/(ASCE)MT.1943-5533.0000353 ↗
7. The relative performance study of foam concrete straw-based10.4028/www.scientific.net/AMR.788.646 ↗
8. Denizli bölgesi traverten artiklarinin beton agregasi incelenmesi
9. High strength characteristics of cement mortar reinforced with hybrid fibres10.1016/j.conbuildmat.2010.11.008 ↗
10. Experimental investigation on the compressive strength of foamed concrete : effect of curing conditions, cement type, foaming agent and dry density10.1016/j.conbuildmat.2017.12.241 ↗
11. Compressive and flexural strength of fiber-reinforced foamed concrete: Effect of fiber content, curing conditions and dry density10.1016/j.conbuildmat.2018.11.197 ↗
12. Properties of concrete incorporating fine recycled aggregates from crushed concrete wastes10.1016/j.conbuildmat.2016.02.154 ↗
13. Effect of waste marble powder and rice husk ash on the microstructural, physico-mechanical and transport properties of foam concretes exposed to high temperatures and freeze–thaw cycles10.1016/j.conbuildmat.2021.123374 ↗
14. Combined effect of coal fly ash (CFA) and nanosilica (nS) on the strength parameters and microstructural properties of eco-friendly concrete10.3390/en16010452 ↗
15. Strength and microstructure of composites with cement matrixes modified by fly ash and active seeds of CSH phase
16. Experimental study on fresh state characteristics of foam concrete with ultrafine GGBS.
17. Mechanical properties and constitutive model of fibre-reinforced high-performance class-F fly ash foam concrete10.1080/19648189.2023.2215284 ↗
18. Helmuth · 1987
19. Flexural behavior of fiber reinforced lightweight concrete10.7764/RDLC.18.3.536 ↗
20. Micro-properties of foamed concrete
21. The effect of high fly ash content on the compressive strength of foamed concrete10.1016/S0008-8846(00)00430-0 ↗
22. Comparative flexural behavior of hybrid ultra high performance fiber reinforced concrete with different macro fibers.10.1016/j.conbuildmat.2011.04.051 ↗
23. Study on the fresh and hardened properties of foam concrete incorporating fly ash10.1016/j.matpr.2021.03.599 ↗
24. Effect of activated foaming agent on the foam concrete properties10.1016/j.conbuildmat.2016.08.122 ↗
25. Effect of foaming gas and cement type on the thermal conductivity of foamed concrete10.1016/j.conbuildmat.2019.117197 ↗
26. Use of recycled concrete aggregate in fly-ash concrete10.1016/j.conbuildmat.2011.07.023 ↗
27. Effect of water–cement ratio on pore structure and strength of foam concrete.10.1155/2016/9520294 ↗
28. Transient Conductivity measurements: comparison of the destructive and nondestructive techniques10.1068/htwu289 ↗
29. Durability properties of high performance foamed concrete10.1016/j.proeng.2017.02.120 ↗
30. Influence of porous aggregate on the properties of foamed concrete10.1515/cons-2016-0006 ↗
31. Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition10.1016/j.conbuildmat.2014.05.080 ↗
32. Structural performance of lightweight steel-foamed concrete–steel composite walling system under compression10.1016/j.tws.2010.08.007 ↗
33. Reusing ceramic wastes in concrete10.1016/j.conbuildmat.2009.10.023 ↗
34. Cementitious building materials reinforced with vegetable fibres: a review10.1016/j.conbuildmat.2010.07.024 ↗
35. Physical and functional characteristics of foam concrete: a review10.1016/j.conbuildmat.2019.06.052 ↗
36. A classification of studies on properties of foam concrete10.1016/j.cemconcomp.2009.04.006 ↗
37. Investigating an optimum mixing method to produce foam concrete fulfilling the workability, density, shrinkage, strength and total volume
38. The effect of water binder ratio and fly ash on the properties of foamed concrete
39. Effects of expanded polystyrene (EPS) particles on fire resistance, thermal conductivity and compressive strength of foamed concrete10.1016/j.conbuildmat.2016.02.218 ↗
40. Comprehensive investigation into the effect of the newly developed natural foaming agents and water to solids ratio on foam concrete behaviour10.1016/j.jobe.2022.105042 ↗
41. Use of different forms of waste plastic in concrete–a review10.1016/j.jclepro.2015.08.042 ↗
42. Properties of NaOH activated geopolymer with marble, travertine and volcanic tuff wastes10.1016/j.conbuildmat.2016.10.038 ↗
43. TS EN 196-1 · 2002
44. Tsi · 2002 · EN197–N191
45. Türker · 2009
46. Structural characterization of hybrid fiber reinforced polymer (FRP)-autoclave aerated concrete (AAC) panels10.1177/0731684406065090 ↗
47. Compressive and flexural strength of foamed concrete containing polyolefin fibers10.4028/www.scientific.net/AMR.911.489 ↗
48. Fabrication and properties of concrete containing industrial waste10.3389/fmats.2023.1169715 ↗
49. Structural lightweight aggregate concrete with reduced density— Lightweight aggregate foamed concrete.10.1016/0262-5075(80)90029-9 ↗
50. Physico-mechanical, durability and thermal properties of basalt fiber reinforced foamed concrete containing waste marble powder and slag10.1016/j.conbuildmat.2021.123128 ↗
51. Analysis of the effect of rock salt on grout’s freeze-thaw strength with the Taguchi Method10.1016/j.polar.2022.100899 ↗
52. Preparation and properties of foam concrete incorporating fly ash10.3390/ma15186287 ↗
53. A review on the usage of ceramic wastes in concrete production
54. Engineering material properties of a fiber reinforced cellular concrete