journal article·2021-04-01Open access

Study on the microstructure and properties of a phosphor copper ball during its formation process

Zhongke Zhang, Zhao Li, Changzhong Zhao

Materials Research Express· Volume 8· Issue 4

Abstract

Abstract Microcrystalline phosphor copper balls with a diameter of 28 mm were prepared via continuous extrusion upsetting. Optical microscopy and electron backscatter diffraction were used to study the microstructural evolution of phosphor copper balls during the formation process. In addition, the hardness distribution and tensile properties were tested. The results show that fine dynamic recrystallisation grains and twins were formed after continuous extrusion and that the grains were further refined after upsetting. After continuous extrusion upsetting, there were typical 〈111〉, 〈100〉, and 〈110〉 fibre textures, and the proportions of these three textures in the individual samples were different. The change in microhardness was affected by the microstructure. The increase in the hardness value from casting and continuous extrusion upsetting was owing to pronounced grain refinement. The grain sizes from the centre to the edge were similar, and the grain refinement was more uniform. Notably, the grain size of the extruded rod was still fairly uniform from the centre to the edge in the radial direction. It can be concluded that the continuous extrusion-upsetting phosphor copper anode is more conducive to the formation of black film, that is, it is more suitable for electroplating anode material.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Effect of transverse grain boundary on microstructure, texture and mechanical properties of drawn copper wires10.1016/j.jmst.2013.04.018 ↗
2. Effect of ECAP combined cold working on mechanical properties and electrical conductivity of Conform-produced Cu-Mg alloys10.1016/j.jallcom.2013.08.007 ↗
3. Developmental of anode system on copper sulfate plating
4. Brief analyzing the method for grain refining of phosphor copper ball
5. Effect of cryogenic impact deformation and subsequent annealing on microstructure and microhardness of pure copper10.1016/j.matlet.2015.05.150 ↗
6. Nanostructure and properties of a Cu–Cr composite processed by severe plastic deformation10.1016/j.scriptamat.2008.02.010 ↗
7. Microstructure and texture evolutions and mechanical properties in pure copper by equal-channel angular pressing10.1016/j.jallcom.2013.06.024 ↗
8. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
9. New possibilities for intense plastic deformation of aluminium alloys on a special CEC press10.1007/s12289-008-0099-8 ↗
10. Extreme grain refinement by severe plastic deformation: a wealth of challenging science10.1016/j.actamat.2012.10.038 ↗
11. Using high-pressure torsion for metal processing: fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
12. Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process10.1016/S1359-6462(98)00302-9 ↗
13. Microstructural evolution and mechanical behaviors of equal channel angular pressed copper10.1177/0954406219872520 ↗
14. Microstructure and texture evolution during equal channel angular extrusion of pure copper: effect of strain rate10.4028/www.scientific.net/AMR.239-242.472 ↗
15. Microstructure, texture evolution, and mechanical properties of ECAP-Processed ZAT522 magnesium Alloy10.1007/s40195-019-00969-1 ↗
16. Microstructure and mechanical properties of an Al–Mg–SI tube processed by severe plastic deformation and subsequent anneAling10.1016/j.msea.2015.05.099 ↗
17. A critical examination of pure tantalum processed by high-pressure torsion10.1016/j.msea.2015.04.053 ↗
18. Microstructure evolution and mechanical properties of a Ti-35Nb-3Zr-2Ta biomedical alloy processed by equal channel angular pressing (ECAP)10.1016/j.msec.2013.07.010 ↗
19. Work hardening and microstructure of AlMg5 after severe plastic deformation by cyclic extrusion and compression10.1016/S0921-5093(03)00046-7 ↗
20. Mitigation of edge cracking during accumulative roll bonding (ARB) of aluminum strips10.1016/j.jmapro.2020.03.042 ↗
21. Microstructure and mechanical properties of copper billets fabricated by the repetitive extrusion and free forging process10.1007/s11665-019-03898-3 ↗
22. A new severe plastic deformation method by repetitive extrusion And upsetting10.1016/j.msea.2013.12.006 ↗
23. Phosphorized copper anode for electroplating
24. Refining the microstructure, modifying the texture and enhancing the toughness of AZ31B alloy rod by the extrusion and upsetting10.1016/j.jallcom.2018.05.350 ↗
25. Effect of continuous extrusion on the microstructure and mechanical properties of a CuCrZr alloy10.1016/j.msea.2013.06.031 ↗
26. A note on the control of the solidfication front in the continuous casting of copper tubes10.1016/S0924-0136(99)00314-3 ↗
27. Microstructures and properties of Al–Mg-SI alloy overhead conductor by horizontal continuous casting and continuous extruSIon forming process10.1016/j.msea.2015.09.114 ↗
28. Dynamic and post-Dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
29. Effect of deformation speed on the microstructure and mechanical properties of AA6063 during continuous extrusion process10.1016/j.jmatprotec.2013.05.006 ↗
30. Microstructure and orientation evolution of unidirectional solidification pure copper during ECAP
31. Experimental and numerical investigations of the texture evolution in copper wire drawing10.1007/s00339-012-6777-x ↗
32. Crystallographic texture of drawn gold bonding wires using electron backscattered diffraction (EBSD)10.1023/A:1025751714880 ↗
33. Microtexture and anisotropy in wire drawn copper10.1016/S0921-5093(98)00838-7 ↗
34. Deformation texture of drawn face centered cubic metal wires
35. Analysis of compression textures of aluminum and nickel rods10.4028/www.scientific.net/MSF.408-412.595 ↗
36. refinement and improved tensile properties of Mg–3Al–1Zn alloy processed by low-temperature indirect extrusion10.1016/j.scriptamat.2013.12.005 ↗
37. Microstructure, mechanical properties and electrical conductivity of severe plastic deformation copper and copper alloy
38. Effects of grain size on mechanical properties and work‐hardening behavior of AISI 304 austenitic stainless steel10.1002/srin.201900153 ↗
39. Mechanical properties of single crystal copper and polycrystalline copper during super plastic and cyclic deformation
40. The kinetics and mechanism of the anodic dissolution of phosphorus-containing copper in bright copper plating electrolytes10.1016/0376-4583(81)90037-6 ↗