Influence of process parameters on the organization and properties of 316L-SCBCC bracket formed by selective zone laser melting
Source abstract
Abstract
Abstract 316L porous skeletal scaffolds prepared by selective laser melting (SLM) technology are currently widely used in bone injuries. Its successful implantation is predicated on having properties that match those of natural bone. The process parameters significantly influence the performance of SLM-316L porous scaffold. In this study, the nine-group shaping process parameters were determined by orthogonal method. The 316L porous scaffolds were tested in compression, electrochemistry, XRD and microstructure. The influence of process parameters on the performance of body-centered cubic peripheral square structure bracket was investigated. The influence laws of process parameters on microstructure, mechanical properties and corrosion resistance were obtained. The results show that process parameters have a significant effect on the microstructure, properties and defect distribution. The reduction of defects and grain refinement in the stent is conducive to the improvement of compressive properties and hardness of the stent. The magnitude of the hardness is inversely related to the grain size. The corrosion current density of porous scaffolds are also affected by their microscopic defects and grain size. At an energy density of 78.70 J mm−3 presents the least defects and obtains smaller grains, resulting in the best mechanical properties and corrosion resistance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Study on mechanical properties and permeability of elliptical porous scaffold based on the SLM manufactured medical Ti6Al4V10.1371/journal.pone.0247764 ↗
2. Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: a review10.1016/j.biomaterials.2016.01.012 ↗
3. Mechanical performance of additively manufactured meta-biomaterials10.1016/j.actbio.2018.12.038 ↗
4. Laser additive manufacturing and bionics: redefining lightweight design10.1016/j.phpro.2011.03.046 ↗
5. Fabrication of Co-Cr-Mo endoprosthetic ankle devices by means of selective laser melting (SLM)10.1016/j.matdes.2016.05.083 ↗
6. Microstructure and mechanical behavior of laser additive manufactured AISI 316 stainless steel stringers10.1016/j.matdes.2013.10.016 ↗
7. 316L stainless steel with gradient porosity fabricated by selective laser melting10.1007/s11665-009-9535-2 ↗
8. Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting10.1007/s00170-014-6297-2 ↗
9. Selective laser melting of 316L austenitic stainless steel: detailed process understanding using multiphysics simulation and experimentation10.3390/met11071076 ↗
10. The fabrication of NiTi shape memory alloy by selective laser melting: a review10.1108/RPJ-11-2018-0292 ↗
11. Pitting behavior of SLM 316L stainless steel exposed to chloride environments with different aggressiveness: Pitting mechanism induced by gas pores10.1016/j.corsci.2020.108520 ↗
12. The effect of sub-grain structure on intergranular corrosion of 316L stainless steel fabricated via selective laser melting10.1016/j.matlet.2019.02.047 ↗
13. On the thermal coarsening and transformation of nanoscale oxide inclusions in 316L stainless steel manufactured by laser powder bed fusion and its influence on impact toughness10.1016/j.msea.2022.142690 ↗
14. Laser additive manufacturing of metallic components: materials, processes and mechanisms10.1179/1743280411Y.0000000014 ↗
15. Part and material properties in selective laser melting of metals
16. Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel10.1016/j.msea.2015.07.056 ↗
17. Recent developments of biomaterials for additive manufacturing of bone scaffolds10.1002/adhm.202000724 ↗
18. A comparative investigation on the mechanical properties and cytotoxicity of Cubic, Octet, and TPMS gyroid structures fabricated by selective laser melting of stainless steel 316L10.1016/j.jmbbm.2022.105151 ↗
19. Porous scaffolds for bone regeneration10.1016/j.jsamd.2020.01.007 ↗
20. Process optimisation of selective laser melting using energy density model for nickel based superalloys10.1179/1743284715Y.0000000108 ↗
21. Effects of processing parameters on properties of selective laser melting Mg-9%Al powder mixture10.1016/j.matdes.2011.06.061 ↗
22. Selective laser melting of biocompatible metals for rapid manufacturing of medical parts10.1108/13552540710776142 ↗
23. Microstructure and tensile properties of iron parts fabricated by selective laser melting10.1016/j.optlastec.2013.09.017 ↗
24. Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel10.1016/j.matdes.2013.03.056 ↗
25. Strain-induced reactivation of corrosion pits in austenitic stainless steel10.1016/j.corsci.2017.05.023 ↗
26. Selective laser melting of aluminum and titanium matrix composites: recent progress and potential applications in the aerospace industry10.3390/aerospace7060077 ↗
27. Highly porous, low elastic modulus 316L stainless steel scaffold prepared by selective laser melting10.1016/j.msec.2016.07.027 ↗
28. Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel10.1016/j.jmatprotec.2017.05.042 ↗
29. Optimization of structural and processing parameters for selective laser melting of porous 316L bone scaffolds10.3390/ma15175896 ↗
30. Additively manufactured lattice structures with controlled transverse isotropy for orthopedic porous implants10.1016/j.compbiomed.2022.105761 ↗
31. Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting10.1016/j.jnucmat.2015.12.034 ↗
32. Selective laser melting of stainless steel 316L with low porosity and high build rates10.1016/j.matdes.2016.05.035 ↗
33. An overview overview of direct laser deposition for additive manufacturing; part ii: mechanical behavior, process parameter optimization and control10.1016/j.addma.2015.07.002 ↗
34. A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties10.1016/j.matdes.2018.02.018 ↗
35. Study on formation of surface and microstructure of stainless steel part produced by selective laser melting10.1179/174328409X441300 ↗
36. Effect of process parameters on density of Fe-16%Ni metal part formed by selective laser melting
37. A systematic review of the performance of ceramic and metal implant abutments supporting fixed implant reconstructions10.1111/j.1600-0501.2009.01787.x ↗
38. Corrosion behavior and biocompatibility of additively manufactured 316L stainless steel in a physiological environment: the effect of citrate ions10.1016/j.addma.2020.101237 ↗
39. Synthesis and characterisation of single and duplex ZnO/TiO2 ceramic films on additively manufactured bimetallic material of 316L stainless steel and Ti6Al4V10.1088/2051-672X/accf6c ↗
40. Corrosion performance of additively manufactured stainless steel parts: a review10.1016/j.addma.2020.101689 ↗
41. Effects of the unit cell topology on the compression properties of porous Co-Cr scaffolds fabricated via selective laser melting10.1108/RPJ-08-2015-0114 ↗
42. Wetting behavior of selective laser melted (SLM) bio-medical grade stainless steel 316L10.1016/j.matpr.2021.12.046 ↗
43. Hardened austenite steel with columnar sub-grain structure formed by laser melting10.1016/j.msea.2014.12.018 ↗
44. Mechanical behavior of selective laser melted 316L stainless steel10.1016/j.msea.2017.04.058 ↗
45. Effects of heat treatment on the mechanical and corrosion resistance properties of 316L NRHH Porous bone scaffolds by selective laser melting10.1007/s11661-024-07356-1 ↗