journal article·2025-06-01Open access

Experimental evaluation of biomimicry-inspired metallic hybrid lattice structures produced by laser powder bed fusion

Turker Turkoglu

Materials Research Express· Volume 12· Issue 6

Abstract

Abstract This study presents an experimental evaluation of novel bio-inspired hybrid lattice structures fabricated from AlSi10Mg using the Laser Powder Bed Fusion (L-PBF) technique. Drawing inspiration from the hierarchical architecture of coral formations, three hybrid lattice configurations—GiG (Gyroid inside Gyroid), GiD (Gyroid inside Diamond), and GiS (Gyroid inside Schwarz)—were designed to investigate the influence of internal topology on mechanical behavior. Samples were characterized through quasi-static compression tests, hardness measurements, surface roughness evaluation, SEM, and XRD analyses. Among the configurations, GiS demonstrated the highest compressive strength (134.35 MPa) and energy absorption capacity (80.14 MJ m−3), owing to its combined stretch- and bending-dominated characteristics. These findings underline the potential of bio-inspired lattice geometries to improve mechanical performance in lightweight design, thereby offering promising strategies for advanced industrial applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Engineering Technology and Methodologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Design and numerical assessment of an additively manufactured Schwarz diamond triply periodic minimal surface fluid-fluid heat exchanger10.2351/7.0001184 ↗
2. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
3. The effect of overhang and recoater angles on the quality of laser powder bed fusion produced parts with contactless supports10.1088/2053-1591/ad8ff8 ↗
4. Impact of lattice designs and production parameters on mechanical properties of AlSi10Mg in laser powder bed fusion10.1515/mt-2024-0297 ↗
5. Investigation into the influence of boronizing on the wear behavior of additively manufactured Inconel 625 alloy at elevated temperature10.1007/s40964-023-00398-8 ↗
6. Laser powder bed fusion of pure copper using ring-shaped beam profiles10.2351/7.0001562 ↗
7. Fabrication and analysis of Fe3O4/ZnO/epoxy composites via stereolithography: structural and photocatalytic properties10.1002/pc.29621 ↗
8. Predictive modeling of lattice structure design for 316L stainless steel using machine learning in the L-PBF process10.2351/7.0001174 ↗
9. Computational evaluation of temperature-dependent microstructural transformations of Ti6Al4V for laser powder bed fusion process10.1007/s11665-022-06767-8 ↗
10. Oxide distribution in PBF-LB/M-processed ODS steel: effects of ball milling and dielectrophoretic deposition in powder production10.1177/00325899241304735 ↗
11. Effect of spherical Mo metal particles on microstructure and properties of 316L stainless steel during laser powder bed fusion10.1088/2053-1591/ada5b9 ↗
12. A review of selective laser melting of aluminum alloys: processing, microstructure, property and developing trends10.1016/j.jmst.2018.09.004 ↗
13. Additive manufacturing of metallic lattice structures: unconstrained design, accurate fabrication, fascinated performances, and challenges10.1016/j.mser.2021.100648 ↗
14. State-of-the-art of selective laser melting process: a comprehensive review10.1016/j.jmsy.2022.04.002 ↗
15. Review on mechanical properties of metal lattice structures10.1016/j.compstruct.2024.118267 ↗
16. Fabrication of 3D-printed GNP/TiO2/epoxy composites: an investigation on mechanical and photocatalytic properties10.1108/RPJ-12-2023-0453 ↗
17. Quasi-static and dynamic behavior of additively manufactured lattice structures with hybrid topologies10.1016/j.addma.2021.102466 ↗
18. Study on crashworthiness of nature-inspired functionally graded lattice metamaterials for bridge pier protection against ship collision10.1016/j.engstruct.2022.115404 ↗
19. Stiffness and energy absorption of additive manufactured hybrid lattice structures10.1080/17452759.2021.1954405 ↗
20. A comprehensive review on additive manufacturing and its applications in biomimetics
21. Using biomimicry and bibliometric mapping to guide design and production of artificial coral reefs10.1016/j.marenvres.2022.105685 ↗
22. Fracture behaviour of laser powder bed fusion AlSi10Mg microlattice structures under uniaxial compression10.1016/j.matdes.2023.112489 ↗
23. AlSi10Mg hollow-strut lattice metamaterials by laser powder bed fusion10.1039/D3MA00813D ↗
24. Numerical and experimental investigations on manufacturability of Al–Si–10Mg thin wall structures made by LB-PBF10.1016/j.tws.2023.110814 ↗
25. Compressive properties of Al-Si alloy lattice structures with three different unit cells fabricated via laser powder bed fusion10.3390/ma13132902 ↗
26. Design and strengthening of dual bio-inspired lattice structures based on additive manufacturing10.1016/j.aej.2024.11.088 ↗
27. Functionally graded multi-morphology lattice structures as an optimized sandwich core via digital light processing additive manufacturing10.1016/j.matdes.2024.112710 ↗
28. Powder bed fusion–laser melting (PBF–LM) process: latest review of materials, process parameter optimization, application, and up-to-date innovative technologies10.1007/s40964-022-00311-9 ↗
29. A comprehensive review on laser powder bed fusion of steels: processing, microstructure, defects and control methods, mechanical properties, current challenges and future trends10.1016/j.jmapro.2021.12.033 ↗
30. A novel hybrid lattice design of nested cell topology with enhanced energy absorption capability10.1016/j.ast.2022.107776 ↗